EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

IPC25052 Inglis Dishwasher - Instructions

All Instructions for the IPC25052
61 - 75 of 249

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
SOAP DISPENSER DOOR DID NOT CLOSE.
4 of 7 people found this instruction helpful.
  • ROBERT from MAHWAH, NJ
  • Very Easy
  • Less than 15 mins
  • Screw drivers
WATCHED THE VIDEO FOR 2 MINUTES. REPLACED THE 3 PARTS IN LESS THAN A MINUTE. THANKS FOR THE VIDEOS.
Was this helpful?
Thank you for voting!
Portable Dishwasher was leaking around connection to faucet.
3 of 4 people found this instruction helpful.
  • Mike from CASTLETON, NY
  • Very Easy
  • Less than 15 mins
Purchased and installed new faucet attachment. It arrived quickly and very easy to attach. Thank you !
Was this helpful?
Thank you for voting!
Cap was missing/lost.
2 of 2 people found this instruction helpful.
  • Jose from Coolidge, AZ
  • Very Easy
  • Less than 15 mins
Easy fix. It’s a screw on by hand piece.
Was this helpful?
Thank you for voting!
Top rail stop clip broke
3 of 5 people found this instruction helpful.
  • Ken from PEMBROKE PNES, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Very easy to remove the broken one and just clip in the new one.
Was this helpful?
Thank you for voting!
Tenant took parts with her after lease,
3 of 5 people found this instruction helpful.
  • Roeland from MEDINA, WA
  • Very Easy
  • Less than 15 mins
Just click in, you can basically do it with your eyes closed
Was this helpful?
Thank you for voting!
Front Track stop missing
2 of 2 people found this instruction helpful.
  • Tim from GLADSTONE, MO
  • Very Easy
  • Less than 15 mins
Snap new track stop into place. Took a few minutes to figure out top/bottom and inside/outside, but no issues
Was this helpful?
Thank you for voting!
door seal leak
2 of 2 people found this instruction helpful.
  • Tim from Lock Haven, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed seal from door with flat head screwdriver, replaced with new seal. Actually took longer to get out of the box rather than to fix!
Was this helpful?
Thank you for voting!
Top glass rack broke
2 of 2 people found this instruction helpful.
  • James from MILFORD, CT
  • Really Easy
  • Less than 15 mins
Just watched the YouTube video they recommended watching and it is very helpful. No tools needed and was finished in several minutes.
Was this helpful?
Thank you for voting!
Not dispensing detergent
2 of 2 people found this instruction helpful.
  • Mandy from GREENWOOD, SC
  • Easy
  • 15 - 30 mins
  • Pliers
Followed instructions as the videos on this page show.
Was this helpful?
Thank you for voting!
DOOR leaking
3 of 5 people found this instruction helpful.
  • mike from SHELTON, WA
  • Easy
  • 15 - 30 mins
door gasket old the vent was pluged up full of black slime cleaned out and door stopped leaking
Was this helpful?
Thank you for voting!
dish washer leaking out bottom of door
2 of 2 people found this instruction helpful.
  • Ed from Ulysses, KS
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
New gasket did not fix problem. Cleaned air vent cover for steam to exit. Gasket not the problem but new one looks good. thank you
Was this helpful?
Thank you for voting!
Door leaking water.
3 of 5 people found this instruction helpful.
  • Jonathan from Henderson, KY
  • Really Easy
  • Less than 15 mins
The old gasket around the door pulled out easily but was pretty nasty. While cleaning the channel out, kept finding more gunk that had built up. I decided to go ahead and take off the Inner Door. Used Torx driver to take off the screws. Found a tremendous amount of gunk built up. Was well worth taking the extra time to clean it all o ut. Replaced the Inner Door and put new gasket in channel. No more leaking!
Was this helpful?
Thank you for voting!
just slipped yhr olf part out and replaced it w/the new part
3 of 5 people found this instruction helpful.
  • C BURRDYNE from ORANGEVALE, CA
  • Really Easy
  • Less than 15 mins
It just snapped in placed. Very easy.
Was this helpful?
Thank you for voting!
Dishes would'nt come clean or dry from torn boot
7 of 17 people found this instruction helpful.
  • David from Sallisaw, OK
  • Really Easy
  • Less than 15 mins
Was a simple task to perform, a child could have done it. The technical skills diagnosing it was a bit hard though. The skills finding the culprit was indeed simple. Rubber was torn. Dishes would not come clean especially on the top & would not dry properly. The rubber piece being torn in half made it hard for the water & soap to despense to the top through thh center plastic tube, but now it cleans great. Thank's
Now to find out why it won't dry properly at the heating element is another task. It leaves water droplets on the dishes.
Once I got the rubber screw on attachment installed the dishes are clean & dry now & no water dropplets on the dishes.
The water dispenses up to the top like it suppost to throught the small tube to wash the upper rack dishes.
The wife is happy now she doesn't have to clean & dry them by hand.
Thank's so very much!!
Now on to the next project in hand to submit later on.
Was this helpful?
Thank you for voting!
cut wire in center sprayer to remove plastic holder for new basket
2 of 2 people found this instruction helpful.
  • JOHN from IONIA, MI
  • Easy
  • 30 - 60 mins
after that every thing went very well
Was this helpful?
Thank you for voting!
All Instructions for the IPC25052
61 - 75 of 249