This plug button is designed for use with various makes and models of refrigerators and is made of white plastic. Used for cosmetic purposes to fill and cover the securing screw of the door handle, this plug button features an approximately 0.5-inch outer-diameter. To install, simply remove the old plug with a flathead screwdriver or flat tool and push the new plug into place.
This is a white door gasket for refrigerators. It is used to secure and seal the door when it is closed in order to trap cool/cold air inside. It is important to replace the gasket if defective or damaged to make sure that cold air does not consistently leak out, resulting in symptoms such as frost build up or longer running. For this ins...Read moretallation you need a 4-in-1 screwdriver and an Allen wrench. Refer to the instructions provided by the manufacturer for further guidance and instructions.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
This refrigerator had pawer( lite was on) but nothing turning--motor or fan. Turned control temperature min-max - no cange.
49 of 112 peoplefound this instruction helpful.
HAE-YOUNG from Douglaston, NY
Easy
1- 2 hours
Screw drivers
Found burned Defrost timer contacts.
Was this helpful?
Thank you for voting!
freezer compartment worked fine but very little cooling going to refrigerator section.
3 of 3 peoplefound this instruction helpful.
Lee from OZARK, AR
Really Easy
30 - 60 mins
Screw drivers
Freezer worked great but no cooling to refrigerator section. Replaced with part ordered. Phillips head screw driver is all that is needed. Very easy to replace, it's plug and play. New part powered up neither the freezer nor the refrigerator. Went back to old part and atleast freezer still works. New part was no good from factory. The re
... Read moreplacement part# matched the original. I attempted to contact PartsSelect but there was no response back.