HTC12 - Overview
Models starting with HTC12
Click on the best match to narrow your results.
- HTC12 Homelite Tiller (Homelite Tiller Model HTC12 Parts)
- HTC12 (UT-22089-B) Homelite Trimmer (Htc12 Hedge Trimmer Ut-22089-B 22089-B-Ut Htc12 Hedge Trimmer Ut-22089-B Htc12 Hedge Trimmer)
- HTC12 (UT-22089-C) Homelite Trimmer (Htc12 Hedge Trimmer Ut-22089-C 22089-C-Ut Htc12 Hedge Trimmer Ut-22089-C Htc12 Hedge Trimmer)
- HTC12 (UT-22089) Homelite Tiller (Tiller)
- HTC1244W General Electric Microwave
- HTC1246W General Electric Microwave
Keep searches simple, eg. "belt" or "pump".
Primary Door Interlock Switch
PartSelect #: PS237015
Manufacturer #: WB24X10047
This interlock switch is located in the door latch.
$54.07
In Stock
Primer Bulb
PartSelect #: PS9912192
Manufacturer #: 188-512-1
This is a rubber primer bulb with a plastic adapter attachment that is used on a variety of lawn and garden equipment models. This bulb attaches to the carburetor and is used to pump gasoline from the...
$13.92
In Stock
Grommet
PartSelect #: PS12667978
Manufacturer #: 98792
This is a genuine OEM replacement part, sold individually. This Bumper helps keep the fuel tank in place, and minimizes vibration of the fuel tank. This part is used with a variety of string trimmers,...
$6.30
Special Order
Air Purge Bulb
PartSelect #: PS9867073
Manufacturer #: 01183
This is an OEM replacement part,it is sold individually. The purpose of the Air Purge Bulb is to purge all of the air from the carburetor. It then brings fuel up through the fuel line in the tank into...
No Longer Available
Piston Ring 30cc
PartSelect #: PS12660312
Manufacturer #: 690161005
This replacement piston ring is a high quality manufacturer sourced replacement part that is specially designed for use with Homelite and Ryobi handheld lawn and garden equipment. It is used to provid...
No Longer Available
Clamp- Wire
PartSelect #: PS9997429
Manufacturer #: 690765001
This metal OEM wire clamp is a type of fastener that holds hoses or cables together and keeps them from moving while your machine is operating. It is mostly found in lawn equipment to attach its fuel ...
$6.40
Special Order
Gasket- Fuel Cap
PartSelect #: PS10037991
Manufacturer #: 98805A
It is a genuine manufacturer-supplied replacement part that is specially made for use with Homelite handheld lawn and garden equipment. This gasket is secured in the fuel cap to provide and air-tight ...
No Longer Available
Screw (10-14 X 1/2 In)
PartSelect #: PS10017015
Manufacturer #: 82541
This manufacturer sourced part is designed for use with Homelite and Ryobi handheld lawn and garden equipment. It an identical replacement for a missing or a damaged screw that was installed on a new ...
$4.23
In Stock
Common Symptoms of models starting with HTC12
[Viewing 4 of 4]Won’t turn on
Fixed by
these parts
these parts
Show All
No heat
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave would turn on and count down, but not heating and not rotate turntable. Pressing door up would occasionally start heat.
First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reco
... Read more
nnect wires, reseat latch mount by placing top bracket tab in place first, allign and secure with screws. Reseat touch pad by placing bottom tabs in first, tilt forward and press up to seat top tabs, secure with top screw. Secure vent louver screws, plug in and watch your microwave work again.
Read less
Parts Used:
-
Michael from Ridgefield, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
40 of 67 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave runs with the door open
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover
and test to see if that solved the problem. If so then well done!!
and test to see if that solved the problem. If so then well done!!
Parts Used:
-
Thomas from Andover, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
37 of 58 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Everything seemed to work with the controls, but when you pressed start the light would come on and nothing else. The turntable and heating system would not function.
I unplugged it, removed the outer shell with torque bits and a screwdriver, drained the main capacitor, and began debugging the circuit with my fluke multimeter, found the bad primary interlock, googled the part number, ordered the part, received it in 2 days, replaced the interlock in about 2 minutes, and put the cover back on. Fixed.
... Read more
Saved me about $200 over buying a new unit and was grateful for partselect's great service.
-Keith Packard
-Keith Packard
Read less
Parts Used:
-
Keith from Bowling Green, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
25 of 43 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!