Models > HSS25GFTABB

HSS25GFTABB Hotpoint Refrigerator - Overview

Sections of the HSS25GFTABB

[Viewing 8 of 8]

Manuals & Care Guides for HSS25GFTABB

Click to download
Keep searches simple, eg. "belt" or "pump".
Refrigerator Ice and Water Filter – Part Number: MWFP
Refrigerator Ice and Water Filter
★★★★★
★★★★★
(76)
PartSelect #: PS8746144
Manufacturer #: MWFP
This OEM ice and water filter fits side-by-side and bottom-freezer GE models. The most common reason you would need to change this part is if you have never updated your model and it is no longer filt...
$73.07
  In Stock
Order within the next 4 hrs and your part ships today!
Temperature Sensor – Part Number: WR55X10025
Temperature Sensor
★★★★★
★★★★★
(66)
PartSelect #: PS304103
Manufacturer #: WR55X10025
This sensor (Temperature Sensor, Thermistor, Refrigerator Temperature Sensor) sends the temperature reading of the compartment to the control board. If you notice your refrigerator is too warm, too co...
$27.00
  In Stock
Order within the next 4 hrs and your part ships today!
Defrost Thermostat – Part Number: WR50X10068
Defrost Thermostat
★★★★★
★★★★★
(18)
PartSelect #: PS1017716
Manufacturer #: WR50X10068
This defrost termination thermostat (Defrost Limiter Thermostat, High Limit Thermostat, Refrigerator Defrost Bi-Metal Thermostat) acts as a safety device to stop the evaporator coil from overheating, ...
$29.26
  In Stock
Order within the next 4 hrs and your part ships today!
Drawer Slide Rail - Right Side – Part Number: WR72X240
Drawer Slide Rail - Right Side
★★★★★
★★★★★
(58)
PartSelect #: PS306944
Manufacturer #: WR72X240
This drawer slide rail is for the right side of your refrigerator. The drawer slide rail attaches horizontally to the refrigerator wall and supports the drawer so it can easily slide in and out. If th...
$42.55
  In Stock
Order within the next 4 hrs and your part ships today!
WATER VALVE WITH GUARD – Part Number: WR57X33326
WATER VALVE WITH GUARD
★★★★★
★★★★★
(80)
PartSelect #: PS16226572
Manufacturer #: WR57X33326
This water inlet valve (Refrigerator Water Inlet Valve Assembly) supplies water to the ice maker and the water dispenser in your refrigerator. It is located at the back of the fridge, beneath the bott...
$93.82
  In Stock
Order within the next 4 hrs and your part ships today!
Drawer Slide Rail - Left Side – Part Number: WR72X239
Drawer Slide Rail - Left Side
★★★★★
★★★★★
(31)
PartSelect #: PS306943
Manufacturer #: WR72X239
This is a manufacturer-approved drawer slide rail for your refrigerator. This slide rail is for the left side of the fridge. All you need to complete this repair is a Phillips screwdriver. Remove the ...
$29.73
  In Stock
Order within the next 4 hrs and your part ships today!
Ice Maker – Part Number: WR30X10093
Ice Maker
★★★★★
★★★★★
(76)
PartSelect #: PS1993870
Manufacturer #: WR30X10093
This 10 by 5 inch ice maker (Electromechanical Icemaker Kit, Ice Maker Assembly) produces ice. This particular model will produce seven crescent shaped cubes every cycle. It is constructed of plastic ...
$216.23
  In Stock
Order within the next 4 hrs and your part ships today!
Dispenser Door Assembly or Flapper – Part Number: WR17X11653
Dispenser Door Assembly or Flapper
★★★★★
★★★★★
(87)
PartSelect #: PS964304
Manufacturer #: WR17X11653
This “Dispenser Door Assembly” (Door Recess Assembly, Ice Door Assembly, Dispenser Door, Refrigerator Dispenser Ice Chute Door Kit, Dispenser Door Flap, Ice Chute Door, Flapper) keeps the room air fro...
$15.58
  In Stock
Order within the next 4 hrs and your part ships today!
Dispenser Door Solenoid Assembly – Part Number: WR62X10055
Dispenser Door Solenoid Assembly
★★★★★
★★★★★
(33)
PartSelect #: PS1483583
Manufacturer #: WR62X10055
This part is a possible option when ice door won't open or shut properly or when water is not dispensing.
$64.74
  In Stock
Order within the next 4 hrs and your part ships today!
Defrost Heater and Bracket Assembly – Part Number: WR51X10055
Defrost Heater and Bracket Assembly
★★★★★
★★★★★
(29)
PartSelect #: PS303781
Manufacturer #: WR51X10055
The defrost heater keeps the cooling coils from frosting over. The heater will get hot and melt any ice or frost build up around the coils.
$106.51
  In Stock
Order within the next 4 hrs and your part ships today!
Main Control Board Assembly – Part Number: WR55X10942C
Main Control Board Assembly
★★★★★
★★★★★
(10)
PartSelect #: PS16729744
Manufacturer #: WR55X10942C
This electronic board (Main Control Board Assembly, Control Board, Motherboard) controls the temperature and defrost functions of the unit. This control board is located on the back of the refrigerato...
$443.55
  In Stock
Order within the next 4 hrs and your part ships today!
Recess Door Spring – Part Number: WR02X10585
Recess Door Spring
★★★★★
★★★★★
(12)
PartSelect #: PS285013
Manufacturer #: WR02X10585
This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find th...
$9.17
  In Stock
Order within the next 4 hrs and your part ships today!

Questions And Answers for HSS25GFTABB

Ask our experts a question about this model and we'll get back to you as soon as possible!

5 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rodney
February 4, 2020
How long should it take to get to 40 degrees
For model number HSS25GFTABB
PartSelect logo
Hello Rodney, Thank you for the question. It normally takes 4 - 6 hours of running before it will get close to the correct temperature. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Freddie
December 28, 2022
water line for water dispenser keeps freezing up , any tips are repairs to correct this issue
For model number HSS25GFTABB
PartSelect logo
Hello Freddie, thank you for your question. If the Temperature Sensor PS304103 is not working properly, it may cause the refrigerant system to run longer than necessary. As a result, the refrigerator will be too cold. Also, the Main Board PS16729744 controls the temperature and defrost functions of the unit. f broken due to electrical surges or normal use, your fridge may experience temperatures that are too warm or too cold, or inconsistent defrost cycles. If this happens, the part should be replaced. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
Rodney
February 4, 2020
Where due i find a reset??? looked on the motor board and cant find one
For model number HSS25GFTABB
PartSelect logo
Hello and thank you for writing. There is no reset on the boards. The best way is a hard reset. Go to your breaker box and shut the breakers for your unit off, wait 5 minutes and then turn the breaker to on again. That should hopefully that will clear any problems. We hope this helps. Please contact us anytime if you require further assistance.

Was this helpful?
Thank you for voting!
Kay
May 28, 2023
I need a shelf bracket for the third shelf facing the fridge would be the right hand side
For model number HSS25GFTABB
PartSelect logo
Hi Kay, thank you for the question. The shelf bracket you are looking for is a cantilever shelf, part number PS305280. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Denise
August 27, 2023
Refrigerator works great for a couple of days and then just stops working like the compressor is not starting. I unplug it for a little bit and then plug it back in and it works fine again for another few days.
For model number HSS25GFTABB
PartSelect logo
Hi Denise, thank you for the great question. We have found that there may be an issue with the run capacitor. You may have to replace run capacitor, part number PS11764031. We hope that helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the HSS25GFTABB

[Viewing 28 of 28]
Fridge too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not dispensing water
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Freezer section too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker won’t dispense ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker not making ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Freezer not defrosting
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Frost buildup
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t open or close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge too cold
Fixed by
these parts
Fixing Fixing Fixing
Show All
Light not working
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door Sweating
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge and Freezer are too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker dispenses too little ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing
Show All
Clicking sound
Fixed by
these parts
Fixing Fixing Fixing
Show All
Freezer too cold
Fixed by
these parts
Fixing Fixing Fixing
Show All
Fridge runs too long
Fixed by
these parts
Fixing Fixing Fixing
Show All
Ice maker dispenses too much ice
Fixed by
these parts
Fixing Fixing Fixing
Show All
Doesn’t stop running
Fixed by
these parts
Fixing Fixing
Show All
Won’t start
Fixed by
these parts
Fixing Fixing
Show All
Engine revs but auger will not turn
Fixed by
these parts
Fixing
Show All
Too cold
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Engine runs but cutters do not turn
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Refrigertor water dispenser not working BUT ice machine is working
The very first symptom here is important! The door water dispenser is not working but the ice macine is working. You may only have a frozen water tube in the door so do the following before diagnosing that your solenoid valve is bad: 1) the tube usually runs under the front of the refrigerator and usually has a quick disconnect. Undo the connection and press the dispenser. If water comes out of the tube you have a frozen or blocked tube in the door. 2) Immediately adjust the temperature in the freezer and warm the freezer compartment as much as you can without destroying the freezer contents. Wait 24 hours. This will usually unfreeze the line. Do not waste your time with a hair dryer. NOW, if this doesn't work and you are convinced you need to order and replace the solenoid, follow these steps. Assemble your tools first. I needed a good ratchet set and a screwdriver. A shop towel is helpful for spilled water. A light is handy. Pull out the refreigerator to gain access to the rear of the unit. Unplug the power and close the water valve (older homes, you may need to actually shut the house water supply). Remove the screws which hold the cover over the lower half of the refrigerator. On the left you will see the solenoid. It's always good to see that your new part matches the one you feel needs replaced. They may not match perfectly due to changing design but they should be very similar. One screw holds this part in place and access is very simple. Now simply unplug the electrical connections. In my case, one blue "blade" type connection (powering the water) and one red "blade" type connection powering the ice maker. They are not the same size and this coupled with the coloring means you will not accidently switch them. pull the tubes clear of the solenoid. This is simple and needs no explantion. Grab your new solenoid and reattach both the electrical and water lines (two, remember, ice maker and drink dispencer). Replace the single screw. Re-attach the rear, lower refrigerator cover and go to the front of the unit to check the water. You can listen carefully and hear the power engage from the new part bringing you water. Clean up, replace the refrigerator back to its place and look really tired when your wife sees that you worked "so hard"! You probably saved at least $50-$80 from a service call which can now be used to take the family to dinner after your "exhausting" 15 minute workout of removing about 10 screws and wheeling the unit in and out of place. Writing this article took longer! My 4 year old worked harder holding the flash light!
Parts Used:
WATER VALVE WITH GUARD
  • ralph from bristow, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
1021 of 1132 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic Auger blades broke in ice tray
I used a digital camera and photographed the assembled unit and the metal blades before I started the repair. Then, I removed the top screw on the clear shield. Flip over ice tray and removed two Phillips screws on bottom. Exterior plastic white cover comes off next. The cover sides have hard push-in white plastic tabs. Push them in; pry up top cover with small flathead screwdriver. Slide white top cover up and you will now see the metal blades and assembly. Auger is held in place with a metal c-clip and washer on the end. Use flat head screwdriver to pry off c-clip. Then you will see a nylon round slotted nut. The threads are reverse, use pliers and loosen nut. It is not that tight but pliers are needed. Then it all is loose and ready for removal. I slid all the blades off at one time and kept them stacked together. Slide out auger and clear flat shield cover. Install new auger, clear shield, and metal blade stack. When you put it all back together take a look at the long metal J-hook on the bottom make sure it is in the slot before you make everything tight. Failing to do this will prevent cubed ice from dispensing.
It is not that hard to do the repair it just takes some patience and paying attention to details.
Parts Used:
BUCKET AUGER
  • Tim from Newport News, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
583 of 621 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge too warm, evaporator icing up
After replacing the defrost heater, main board and thermistor I still had the same problem. Called a repair guy and he (with the help of GE on the phone) diagnosed that the temperature sensor was bad. So I ordered from partselect and installed it and it fixed the problem. Been good for a couple months (knocking on wood). To install I had to cut the 2 wires to the old sensor, crimp the 2 new wires on and snap the new sensor to the clip on the evaporator. Very easy. Make sure you seal the ends of the wire crimps so moisture doesn't get in and corrode the connection.
Parts Used:
Temperature Sensor Evaporator Thermistor Clip
  • Gerald from San Clemente, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
600 of 719 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!