HSC18A5 ((0700 and Up)(GX160)) Classen Sod Cutter - Overview

This 1/4-inch plastic washer is designed to space, secure, and protect components within sod-cutting equipment by reducing friction and wear at connection points. Made from durable plastic for reliable performance, it helps maintain smooth operation and proper alignment when replacing worn or damaged spacers during routine maintenance.

Genuine Classen replacement part, this item is sold individually. The 100001 Nylon Washer is used primarily in the handle assemblies of the machines listed below. It will usually be used in conjunction with a nut and lock washer.

Genuine Classen replacement part, this item is sold individually. There are four of these seals used on the Classen Equipment shown below. They are placed inside of the 4172017 Blade Arms to keep dust and debris out. When installing these seals, make sure the spring side is facing away from the bearing.

This is a genuine manufacturer-sourced item that is specially made for Classen sod cutters. It is an identical replacement for a missing or faulty eccentric shaft that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually.

This item is an authentic Classen replacement part that has been sourced from the original manufacturer to be used with sod cutters. The key fits into the slot on the eccentric shaft and is used to link the shaft and the pulley. This item is sold as an individual replacement part.

This is an original Classen part for use in sod cutters and aerators. The idler pulley attaches to the flat washer and is made out of metal. During the installation process, a wrench might be needed to replace this item. It will need to be replaced if it becomes broken. This item is available as an individual replacement part.

This is a genuine OEM sourced replacement part designed for use with Classen sod cutters. This part fits on the side of height adjustment bar and it allows it to spin smoothly. This sleeve is made out of metal and it is sold individually. To replace this part you would need wrench and pliers.

This authentic manufacturer-supplied item is made for use with Classen sod cutters. It is one of the parts utilized to secure the eccentric shaft. The block includes the bearing which allows it to rotate with minimum friction. Check the appropriate diagrams for your model to ensure the correct repair procedure. Keep in mind this high-quality 1

This is an authentic replacement part manufactured for use with Classen sod cutters, aerators, seeders, and turf brushes. Lock washers are commonly used to prevent bolts from unthreading from the part assembly the bolt is used to secure. The lock washer is sold as an individual replacement part, please see model diagram for part location and usage.

This B38 V-belt is a genuine OEM replacement engineered for reliable power transfer in lawn and garden equipment, including heavy-duty applications such as sod cutters. Manufactured to exact B-section specifications, it delivers smooth, efficient performance while resisting stretching and wear under continuous load. Built with durable mat...Read moreerials for long service life in demanding environments, this belt is an ideal replacement when a worn or slipping belt causes loss of power, reduced efficiency, or inconsistent machine operation, helping restore dependable performance and proper drive function.