My Orders
HS40-55334C Tecumseh Engine - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Longer Available
Fuel Tank
Part #35584
The fuel tank goes between the fuel tank bracket and the fuel line. This is a Tecumseh, Husqvarna, and Toro replacement part directly sourced from the manufacturer for use in engines and snowthrowers. This part holds the fuel and is priced individually. A wrench might be required during the replacement of this part. It will need to be replaced if it leaks.
No Longer Available
Fuel Line Clamp
Part #26460
The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.
$9.62
On Order
Inlet Needle, Seat, And Clip Assembly
Part #631021B
$6.40
In Stock
Screw, T-30 Hex Washer Hd Sems
Part #30063
$5.28
Special Order
Gasket
Part #26756
This item is available as an individual replacement part. The gasket attaches to the intake pipe and is made out of a thin material. During replacement, it may require a screwdriver to help install this part correctly. It will require replacing if it breaks. This genuine item is supplied by the original equipment manufacturer for use with...Read more lawn mowers, lawn tractors, and snowblowers made by Tecumseh, Toro, and Lawn Boy.
Read less
$6.40
Special Order
Screw (1/4-15x7/8)
Part #650665
This is a genuine replacement part that has been sourced from the original manufacturer to be used with snow thrower engines from Husqvarna and Toro. The metal screw is used to fasten the fuel tank to the tank mounting bracket. This item is available as an individual replacement part, please note a hex socket wrench may be needed to install this item.
No Longer Available
Air Filter (tec. 30727)
Part #30727
This paper air cleaner element, also known as an air filter, is sourced from the original manufacturer for use in outdoor power equipment. It has an outer diameter of 4.25 inches and a height of 3 inches. The air filter is responsible for removing dirt and debris from the air before it enters the engine to keep the engine free from contam...Read moreinants. Over time, it is normal for the paper on the filter to tear or become clogged, thereby restricting airflow, increasing fuel consumption, and damaging the engine. Regularly inspecting and replacing the air filter is critical to maintaining the performance of your engine. To begin this repair, locate the air filter housing near the engine or carburetor and remove the cover. Carefully remove and discard the old filter, making note of its position. Clean the air filter housing and insert a new, clean filter in the correct position. Place the cover back onto the housing and ensure that it is tightly fitted to prevent air leaks.
Read less
No Longer Available
Fuel Line
Part #30705
$6.40
In Stock
Governor Link
Part #32698
This is a genuine Toro replacement part. The governor link is designed by the manufacturer for use in snowthrowers. This part is made of metal, and is connected to the governor lever to help control the speed of the engine. You may require a wrench and torx screwdriver when replacing this item. This part is sold individually.
$37.74
In Stock
Fuel Line
Part #740017B
The fuel line is a rubber hose that is responsible for allowing the fuel tank to supply the carburetor and various engine components with fuel. This fuel line is designed to be compatible with various types of lawn equipment and is an authentic OEM part. Because it interacts with gas and oil frequently, it will eventually become brittle a...Read morend crack and need to be replaced. To replace it, you will need to drain the fuel from your equipment, remove the clamps securing the ends of the line, and then swap out the old line for the new, before installing the clamps back. Make sure to check the fuel line frequently for cracks and damage to prevent any leaks from harming your equipment and to maintain its health and performance.
Read less
$6.40
In Stock
Spring-extension
Part #31426
This part is available as an individual replacement. The extension spring attaches to the control. A screwdriver and a set of pliers might be needed during the installation process. This part is made out of metal and will need to be replaced if it bends or breaks. It is a genuine item that is supplied by the original equipment manufacture...Read morer for use with engines and snowblowers made by Tecumseh, Husqvarna, Toro, and Lawn Boy.
Read less
$7.42
On Order
Trimmer Spark Plug Cover
Part #610118
This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More