EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

HPS18BTNDRBB Hotpoint Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator Fan Motor – Part Number: WR60X31522
$75.13
In Stock
Evaporator Fan Motor
★★★★★
★★★★★
(153)
Part #WR60X31522
This 115-volt 60Hz evaporator fan motor is located in the back of the freezer and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. If the motor has failed, the freezer/refrigerator will become too warm because the fan motor is not circulating the cool air from the freezer into the refrigerator. This is a genuine OEM part. Please remember to disconnect the power to the appliance before starting your repair.
Glass Shelf – Part Number: WR32X21260
$39.46
In Stock
Glass Shelf
★★★★★
★★★★★
(104)
Part #WR32X21260
This glass shelf is a genuine OEM replacement part is specially designed for refrigerators. It has a length of approximately 23 inches and a width of 13.5 inches. The glass shelf provides a wide surface for you to store various food items and containers inside your refrigerator. It is designed to easily slide in and out of the fridge as needed. If your glass shelf is cracked or damaged it is recommended to replace it promptly for your safety. No mounting hardware is needed, simply pull out the damaged glass shelf and position the new one its place.
FRESH FOOD SHELF – Part Number: WR17X30024
$30.41
In Stock
FRESH FOOD SHELF
★★★★★
★★★★★
(13)
Part #WR17X30024
The door shelf rail snaps into place on the door to hold items on the door shelf.
Condenser Fans Blade Assembly – Part Number: WR60X10207
$19.40
Special Order
Condenser Fans Blade Assembly
★★★★★
★★★★★
(2)
Part #WR60X10207
The condenser fan blade assembly helps to regulate the temperature in your refrigerator or freezer. This fan assembly has 4 blades, but other fans may have 3 blades, so be sure to check the number of blades on your fan. The fan blade is made of white plastic and is approximately 6 inches in diameter. If your freezer section is too warm, or you notice a strange noise coming from your refrigerator when it is running, you may need to replace the condenser fan blade assembly. This part is sold individually.
Refrigerator Crisper Drawer – Part Number: WR02X31766
$59.16
On Order
Refrigerator Crisper Drawer
★★★★★
★★★★★
(7)
Part #WR02X31766
This crisper drawer is for refrigerators. Crisper drawer stores fruits and vegetables at a humidity level that helps keep them fresh longer. Follow the instructions in the owner's manual when installing this part.
GASKET DOOR Freezer – Part Number: WR14X27234
$75.26
On Order
GASKET DOOR Freezer
★★★★★
★★★★★
(2)
Part #WR14X27234
Keep your freezer running efficiently with this dark gray rubber door gasket. It forms a tight seal around the freezer door to keep cold air in and warm air out, helping your food stay fresh and your appliance use less energy. If your current gasket is cracked or not sealing well, this replacement is a simple fix. Just remove the old one and press the new gasket into place along the door frame. It’s flexible, easy to install, and helps reduce frost buildup too.
Wire Shelf – Part Number: WR71X21169
$50.68
In Stock
Wire Shelf
★★★★★
★★★★★
(10)
Part #WR71X21169
This coated wire freezer shelf is designed to provide durable, reliable storage within the freezer compartment of select refrigerators. Its open-wire construction promotes consistent airflow, helping to maintain even temperatures and reduce the risk of frost buildup. Ideal for replacing a damaged or missing shelf, it restores organization and maximizes usable space. The shelf is made from sturdy, coated wire to support frozen items and resist wear over time. Installation is quick and tool-free—simply slide the shelf into the designated grooves within the freezer compartment for a secure fit.
ICE BUCKET – Part Number: WR30X30034
$42.85
In Stock
ICE BUCKET
★★★★★
★★★★★
(7)
Part #WR30X30034
If ice spills inside the freezer or the storage bin no longer slides correctly, a damaged bucket may be the cause. This replacement container collects and stores cubes made by the refrigerators automatic ice maker. Its simple plastic design allows the bin to be removed for serving or cleaning. Inspect the support rails and nearby ice-making parts before installation, since a bent guide or heavy ice buildup can also block movement. Confirm the appliance model and compare the new bin with the old one. Remove any stored ice, slide out the worn bucket, clean the mounting area, and insert the replacement evenly.
FREEZER FIXED SHELF – Part Number: WR71X30014
$31.52
In Stock
FREEZER FIXED SHELF
Part #WR71X30014
Icemaker Fill Cup – Part Number: WR29X10092
$19.64
In Stock
REFRIGERATOR MAIN CONTROL BOAR – Part Number: WR55X43825
$149.36
In Stock
REFRIGERATOR MAIN CONTROL BOAR
★★★★★
★★★★★
(1)
Part #WR55X43825
This main control board is a vital electronic component that governs the essential operations of compatible refrigerators. Acting as the central processor, it regulates temperature settings, manages fan speeds, controls the defrost cycle, and coordinates other key functions to ensure consistent cooling and food preservation. Integrated LED lighting enhances visibility within the refrigerator, while sensor inputs allow the board to dynamically adjust performance for optimal energy efficiency. A malfunctioning control board may result in erratic temperatures, non-functional lighting, or unresponsive controls. Replacing a faulty unit with this genuine OEM component restores reliable operation and supports long-term appliance performance.
Refrigerator Grommet – Part Number: WR02X22869
$15.00
In Stock

Common Symptoms of the HPS18BTNDRBB

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer Fan
267 of 302 people found this instruction helpful.
  • Luis from College Station, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
I removed two srews from the back panel inside fthe reezer compartment and the two that hold the air manifold/baffle? and pulled the baffle out. Then, I removed the two srews that hold the front part of the fan bracket behind the baffle and the back panel came out easily. Two more screws and one quick connect plug attached to the fan and I was done with removal. Insallation was even quicker, I slid the original fan right off the old motor and slid it on the new motor's shaft. Piece of cake! Thanks Partselect.
Was this helpful?
Thank you for voting!
Loud Fan Motor
54 of 65 people found this instruction helpful.
  • Arthur from East Meadow, NY
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Unplug refrigerator.Remove the floor of the freezer box by removing the 4 philips head screws. Remove the cover over the fan by pulling it straight up and out. Remove the styrafoam duct by pulling it straight up and out. Remove the back wall of the freezer by removing the 4 philips head screws. Unplug fan. Remove the fan, bracket and all, by removing the two philips head screws on the back wall. Take the two halves of the bracket appart by removing the two hex head scews on the back of the bracket. Remove the "O" ring from the fan blade and remove the blade. There is a rubber grommet on both the front and back halves of the bracket. Make sure they are set properly in the brackets to secure and position the motor properly so the fan blade doesn't hit anything when it spins. Install the new motor onto the bracket the same way you took the old one off. Check the positions of the brackets, rubber grommets and motor to make sure they're properly installed and secure. Replace the "O" ring onto the fan blade and install it onto the new motor with a firm push on the center of the blade. Install the brackets and fan onto the back wall and plug in the new motor. Reinstall the back wall of the freezer box and make sure the motor is secure. Plug the refrigerator back in and check to make sure the fan blade doesn't hit anything while it's turning. Finish reassembling the freezer box.
Was this helpful?
Thank you for voting!
The lower half of the refrigerator was not cold, the fan was not blowing
27 of 34 people found this instruction helpful.
  • Lucinda from Yucca, AZ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the 4 screws in the back of the freezer. I then pulled the connection from the fan , I replaced the fan to the connection, replaced the 4 screws and I was done! I still can't believe how simple it was.
Was this helpful?
Thank you for voting!