EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

HPS18BTHNRBB Hotpoint Refrigerator - Overview

Diagrams for HPS18BTHNRBB

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator Fan Grommet - Red – Part Number: WR02X12008
$13.92
In Stock
Evaporator Fan Grommet - Red
★★★★★
★★★★★
(27)
Part #WR02X12008
If you notice that your refrigerator or freezer is noisy or too warm, you may need to replace the evaporator fan grommet. This part is red in color, and is about 1 inch in diameter. The evaporator fan grommet is located behind the evaporator fan cover in the back of the freezer. You will need to remove the evaporator fan cover to access the evaporator fan and complete this repair. Before you begin this repair, ensure the power to the refrigerator is disconnected. You will need a pair of needle nose pliers, a small flat blade screw driver and both a 1/4 and 5/16-inch nut driver to complete this repair.
REFRIGERATOR DOOR LIGHT SWITCH – Part Number: WR23X31507
$18.37
In Stock
REFRIGERATOR DOOR LIGHT SWITCH
★★★★★
★★★★★
(41)
Part #WR23X31507
This is the light switch that goes in your refrigerator. If the light is not working or stays on, you may need to replace the switch. It is made of mainly white plastic, and is an OEM part, directly from the manufacturer. Be sure to disconnect the refrigerator from the power source before you begin this repair. To remove the switch, simply use a flathead screwdriver to pop the switch out from the refrigerator wall, then disconnect the wires. Reconnect the wires to the new switch, snap it into place, and the repair is complete.
BLADE EVAP FAN ASM – Part Number: WR60X46086
$29.32
In Stock
BLADE EVAP FAN ASM
★★★★★
★★★★★
(8)
Part #WR60X46086
This blade attaches to the evaporator motor.
Door Hinge Nylon Washer – Part Number: WR01X27364
$16.05
In Stock
Door Hinge Nylon Washer
★★★★★
★★★★★
(2)
Part #WR01X27364
This is the replacement hinge washer for your refrigerator. The hinge washer is mounted on the top of the door hinge pin, and supports the refrigerator door, allowing it to open and close easily. The main reason you would need to replace the hinge washer is if it is worn out, causing the refrigerator door to be more difficult to open and close. You may also hear an unpleasant noise when you open your refrigerator door. The washer is a little less than an inch in diameter and is sold individually. This is an authentic OEM part sourced directly from the manufacturer.
GASKET DOOR FF DG – Part Number: WR14X27235
$76.95
On Order
GASKET DOOR FF DG
★★★★★
★★★★★
(5)
Part #WR14X27235
This door gasket, also known as a door seal, is sourced directly from the manufacturer for use with various models of refrigerators. It is a black, rubber seal that is positioned along the perimeter of the door. It is responsible for creating an airtight seal between the fridge door and the main body of the cabinet. This seal helps to maintain the optimal temperature in the fridge by preventing warm air from entering the fridge and cold from escaping. If the door seal is torn, loose, or can no longer maintain a tight seal, your refrigerator will need to work harder to stay cool, leading to increased energy usage, and potential food spoilage over time.
Wire Shelf – Part Number: WR71X21181
$52.93
In Stock
Wire Shelf
★★★★★
★★★★★
(17)
Part #WR71X21181
Sold individually.
Evaporator Fan Bracket – Part Number: WR21X30013
$16.05
In Stock
GASKET DOOR Freezer – Part Number: WR14X27234
$75.26
On Order
GASKET DOOR Freezer
★★★★★
★★★★★
(2)
Part #WR14X27234
Keep your freezer running efficiently with this dark gray rubber door gasket. It forms a tight seal around the freezer door to keep cold air in and warm air out, helping your food stay fresh and your appliance use less energy. If your current gasket is cracked or not sealing well, this replacement is a simple fix. Just remove the old one and press the new gasket into place along the door frame. It’s flexible, easy to install, and helps reduce frost buildup too.
Evaporator Fan Bracket – Part Number: WR21X30022
$16.06
In Stock
Evaporator Fan Bracket
Part #WR21X30022
Water Tubing Clip – Part Number: WR1X5278
$15.00
Special Order
Water Tubing Clip
Part #WR1X5278
This water tubing clip, also known as a P-clamp, is usually used within refrigerators and freezers to organize the water line and tubing, but due to its versatility, this clip may also be used in other applications, like securing other cables. Made of metal and measuring approximately 1-inch in length, this clip features a hole on each side to allow you to screw it into the side of your appliance and secure the appropriate valve, tube, or cable. This clip is a genuine OEM part that is sold individually.
Wire Shelf – Part Number: WR71X21169
$50.68
In Stock
Wire Shelf
★★★★★
★★★★★
(10)
Part #WR71X21169
This coated wire freezer shelf is designed to provide durable, reliable storage within the freezer compartment of select refrigerators. Its open-wire construction promotes consistent airflow, helping to maintain even temperatures and reduce the risk of frost buildup. Ideal for replacing a damaged or missing shelf, it restores organization and maximizes usable space. The shelf is made from sturdy, coated wire to support frozen items and resist wear over time. Installation is quick and tool-free—simply slide the shelf into the designated grooves within the freezer compartment for a secure fit.
VEGETABLE PAN COVER W/ SLIDES – Part Number: WR32X32505
$90.83
In Stock
VEGETABLE PAN COVER W/ SLIDES
★★★★★
★★★★★
(1)
Part #WR32X32505
This clear shelf sits above your crisper drawers and helps keep fruits and veggies fresh by maintaining the right humidity. It also gives you extra space to store items and makes it easy to slide the drawers in and out. If your current cover is cracked or missing, this replacement snaps right into place—no tools needed.

Questions And Answers for HPS18BTHNRBB

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael - For model number HPS18BTHNRBB
October 28, 2022
the freezer fan vibrates when turned on, what causes it and how do I fix it?
Chris Boyle Profile
Hello Michael, thank you for contacting us. Our research indicates that the issue is probably with the evaporator fan grommet, part number PS963756. If that is not the problem or if you have already fixed that, then the problem would be related to the evaporator fan motor, part number PS12741350. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
$13.92
In Stock
Evaporator Fan Grommet - Red
$75.13
In Stock
Evaporator Fan Motor
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the HPS18BTHNRBB

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
dropped something on the light switch and it broke off
61 of 70 people found this instruction helpful.
  • Lorinda from Dallas, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
we just pried out the old switch and pulled it out the rest of the way with a pair of needle nose pliers. Pulled off the wires on the broken switch and reattached to the new one and just slid/clicked it back into the hole.
Was this helpful?
Thank you for voting!
Light would not work when I opened door.
25 of 31 people found this instruction helpful.
  • joe from spartanburg, SC
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I lifted the old switch with a flat screwdriver, attached wires, and popped into place. Saved 80 bucks for a repair call.
Was this helpful?
Thank you for voting!
Internal light switch was sticking
13 of 16 people found this instruction helpful.
  • John from Vallejo, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Two tabs hold the switch in place. I used a plastic wedge to remove the switch. Removed and replaced the two connectors held in by friction. Painless.
Was this helpful?
Thank you for voting!