Models > HNCMW035

HNCMW035 Haier Freezer - Overview

Sections of the HNCMW035

[Viewing 1 of 1]

Cabinet Parts

Parts for the HNCMW035

[Viewing 12 of 23]

Door Hinge

PartSelect #: PS4116817

Manufacturer #: RF-3450-235

The door hinge on your refrigerator/freezer allows the door to open and close normally. If you notice that your door will not perform this function, you may need to replace the door hinge. If you noti...

GASKET - DOOR

PartSelect #: PS4116251

Manufacturer #: RF-3100-132

COVER - DRAIN

PartSelect #: PS4114806

Manufacturer #: RF-1950-583

COVER - HINGE STILL

PartSelect #: PS4114730

Manufacturer #: RF-1950-507

BASKET

PartSelect #: PS4112435

Manufacturer #: RF-0300-41

LEG

PartSelect #: PS4117338

Manufacturer #: RF-4150-59

LIGHT - GREEN

PartSelect #: PS4117411

Manufacturer #: RF-4260-32

KNOB - THERMOSTAT

PartSelect #: PS4117215

Manufacturer #: RF-4000-71

THERMOSTAT

PartSelect #: PS4119854

Manufacturer #: RF-7350-160

SCREW - HINGE

PartSelect #: PS4118889

Manufacturer #: RF-6150-391

LIGHT - RED

PartSelect #: PS4117410

Manufacturer #: RF-4260-31

DRIER - FILTER

PartSelect #: PS4115801

Manufacturer #: RF-2400-53

$8.32

Questions And Answers for HNCMW035

Be the first to ask our experts a question about this model!

Installation Instructions of parts on the HNCMW035

[Viewing 2 of 2]

green lite out

had to take side cover off, then 2 screws on cover holding t.stat and orange and green lite in place. Replaced lite but couldn't get one of the screws back on in such a tight place and doing it blindly. Had to fix adheasive instead of one of the screws.

Parts Used:

LIGHT - GREEN

Matthew from Beltsville, MD
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Build up of ice inside freezer in one particular area at the top of the freezer

Continued complaints to HAIER Company resulted in them sending a new but damaged replacement freezer that had the same problem. I talked with a local appliance repair technician and he advised to loosen the bolts holder the top lid in place as they may not be level. By doing that and replacing the seal, solved my problem. If HAIER Company had suggested that in the first place it would have saved them the problem of trying to replace the original freezer.