This switch is a replacement electrical component designed to control power or operational states. It is commonly replaced when activation becomes unreliable, intermittent, or fails completely.
This switch controls the activation of specific appliance functions by opening or closing an electrical circuit. Designed for responsive and reliable operation, it is commonly replaced when functions fail to engage, operate intermittently, or do not respond correctly to user input.
This glass dish tray provides a stable surface for heating or cooking while allowing even heat distribution. Made from durable, heat-resistant glass, it is replaced when cracked, chipped, or missing to ensure safe, consistent operation.
Enhance your cooking experience with this durable grill grid designed for Bosch convection microwave ovens and combination units. It provides a stable surface for grilling meats, vegetables, and other foods while promoting even heat distribution for perfect results. The grid also functions as a vent grille, helping maintain proper airflow...Read more and prevent overheating. Made from high-quality materials that withstand high temperatures, it’s easy to clean and simple to install—just place it in position and you’re ready to cook. Ideal for restoring efficient grilling performance when the original grid is missing or damaged.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dannie - For model number HMV3053U
July 15, 2023
When opening the door middle interlock switch will short tripping the circuit breaker. This was interment but now does it every time door opens. Have changed switches-switch holder-and checked the latches which seem to be fine. Need advice
Hi Dannie, thank you for reaching out. We would suggest making sure the circuit is not overloaded. If the issue remains, the problem might be with the control board, part number PS12072161. You may test the control board for continuity using a multimeter. We hope this helps. Good luck with the repair!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Intermittently, when closing the microwave door it would break the circuit at the breaker box
14 of 18 peoplefound this instruction helpful.
Diane from FREEPORT, IL
Easy
30 - 60 mins
Pliers, Screw drivers
Unplug microwave. Removed 2 screws from the top of the microwave to remove the top plastic strip carefully because the tabs can break off. Remove one screw above the control panel and one screw underneath the control panel. The control panel should come out. Take a picture of the wiring connections to help identify how to put it back toge
... Read morether. Carefully disconnect each wire set using a needle nose plier if needed. There are 3 sets of wires that go to the 3 door switches. After the control panel is removed there are 2 or three screws to remove that hold the door latch mechanism. With the door open, entirely remove the latch mechanism. Pay attention to the 3 switches, one has a different number on it and the other two have the same number but differ by being normally closed and normally open. You can test them or just replace them. Note I ordered the 3 switches by part number but got 1 switch that was incorrect and was the same as the other one. There is a plastic tab that needs to be depressed at the bottom of the switch casing in order to get the switch out. The problem with my microwave ended up being the lever was worn visibly by door misalignment with the latch. One of the screws holding the latch in position was missing. The door was not consistently activating the lever and the bottom switch. Replaced the latch, lever and two of the 3 switches, even though they didn’t need it. Check door alignment with latch. Reassemble.
Replaced fuse and switches.This is an undercabinet microwave. The fuse is located in top right but there is no access from the front of the microwave necessitating complete removal of the microwave from the cabinets and then taking the microwave cover off. This is a terrible design, Instead, I cut the vent grate on the top
... Read moreright front of the microwave to access the fuse. replaced the fuse. Switches were relatively easy to replace...being careful to not pull wires out of connectors or breaking small plastic tongs and clips. Microwave is still blowing fuses though. door alignment may be off. Again, terrible design and lousy product quality.
My Orders
