This front rack support helps stabilize and securely position a rack within the appliance. Its sturdy design ensures proper alignment and safe support during loading and unloading.
This microwave turntable motor coupler connects the motor to the glass tray, ensuring smooth and even rotation for consistent cooking results. Designed for durability and precision, it replaces worn or damaged couplers that can cause the tray to wobble or stop turning. This part is essential for maintaining proper microwave performance an...Read mored even heating. Installation is quick and straightforward, requiring only basic tools.
This microwave microswitch functions as a door interlock safety component, preventing the appliance from operating when the door is open. It ensures safe and efficient performance by interrupting power to the microwave when the door is not securely closed. Built for durability, this part is essential for maintaining proper safety standard...Read mores. If your microwave fails to start or operates incorrectly, a faulty door switch may be the cause. Installation requires disconnecting the appliance from power before replacing the switch.
This microswitch, also known as a safety switch, is a genuine OEM replacement part for use in microwaves. It is a highly sensitive switch which responds to slight changes in pressure or position, and ensures that the microwave only operates when the door is shut. The switch can fail due to physical damage or electrical failure, resulting ...Read morein difficulties closing the door, and turning on the appliance. To remove the faulty switch, disconnect the wiring connectors and take note of where they are positioned. Place the new switch in position and reattach the wiring connectors to the appropriate terminals and close the microwave door to check that the switch engages appropriately.
This microwave line fuse is a genuine replacement part designed to protect your appliance from power surges and overheating. It helps restore power when a blown fuse prevents the microwave from turning on and is built to meet the original safety and performance standards. This small metal fuse is easy to replace and is commonly used when ...Read morea microwave suddenly stops working. Be sure to check your model number to ensure it’s the correct fit for your unit.
This microwave turntable tray is a genuine replacement part designed to ensure consistent and even heating during cooking cycles. Made of durable black metal, it rotates smoothly on built-in rollers and sits securely on the coupler inside the microwave cavity. Its rotation helps distribute heat evenly across food surfaces, improving cooki...Read moreng performance. Compatible with select Bosch, Thermador, and Gaggenau microwave models, this OEM tray replaces previous versions and is engineered for a precise fit. For proper installation, refer to the microwave’s owner’s manual to ensure correct placement and alignment with the coupler and roller system.
This waveguide cover protects the interior of the microwave by shielding key components from food splatter and moisture. Made from durable mica material, it helps prevent sparking and keeps the appliance operating safely and efficiently. Designed to match the original fit on select models, it replaces a worn or damaged cover and installs easily once the microwave is disconnected from power.
This support is a replacement structural component designed to hold or stabilize internal assemblies during operation. It helps maintain alignment and durability and is commonly replaced when bent, cracked, or no longer providing adequate support.
The left door interlock support keeps the microwave’s door switch properly aligned so the appliance can detect when the door is fully closed and operate safely. If the switch becomes loose or misaligned, the microwave may fail to start or stop unexpectedly. This sturdy bracket is designed for select models and provides a reliable replacem...Read moreent when the original support is damaged or worn, restoring safe and consistent door-switch operation.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
A.J. - For model number HMC80252UC
December 17, 2019
How do i turn off demo mode on HMC80252UC (01) Bosch Microwave
Hello, A.J.and thanks for writing.
1. Press SETTINGS 12 times. "Demo Mode" and "ON. Press (1) to OFF" will appear in the display text area.
2. Press the "1" keypad to change the Demonstration Mode setting to Off.
3. "OFF Selected" will scroll in the text area. Demo Mode has been turned Off.
We hope this helps. Please contact us anytime.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Yarek - For model number HMC80252UC
January 22, 2020
The part number is ps10060776 based on your website recommendation. I'm just wondering if it's easy to replace the old fuse with the new one? Hopefully there is easy access to the fuse once i pull it out.
Thank you for your question. NOTE: If you are not comfortable doing this yourself, please get an electrician to do this repair. Before you begin any repair please unplug the appliance from the electrical outlet. Use a Phillips head screw driver to unthread the screws securing the grill. With the screws removed, open the microwave oven door then the slide the grill to the left and lift it up to remove. Next remove the control panel mounting screw then lift the control panel up to detach. Then remove the screw holding the inner access panel and then release the panel from the retaining clips. To avoid injury, you will need to release the potentially dangerous charge from the capacitor by placing a screw driver with an insulated handle across the terminals. Be careful not to touch the metal portion of the tool. Use pliers to detach the old fuse from the noise filter board. Install the new fuse by snapping it into the bracket. Replace the inner access panel and secure it with the screws. Now insert the control panel tabs to the slots in the frame and push the panel down. Secure it with the mounting screw. Insert the tabs of the grill into the frame and slide it to the right. Shut the oven door and then secure the grill with the screws. Plug the power cord back in and the microwave should now work. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Steve - For model number HMC80252UC
January 12, 2024
Upon when first purchased the control panel was always dim when hooked up , approximately 1 yr later the unit had a burning smell and shut down. I removed the unit and noticed the cooling motor transformer burnt. I replaced the cooling motor and the 2 fuses where the power goes in. Hooked unit back up with the control panel not lighting up. When it originally shut down and quit the breaker never popped. Any suggestions? Control panel needs replacing,
Thx
Hi Steve, thank you for contacting us. Based on the description you have provided, we would recommend checking the control unit, part number PS12071902. It manages various microwave functions such as heating, lighting and turntable operation. You may need to replace it to fix the issue. We hope this sorts out your problem!
Hello Malkit, Thank you for the question. The Door Spring is only sold as part of the Hinge and Door Assembly, PartSelect #: PS11724832. The Hinge and Spring are not sold separate from the Door. Thank you for the inquiry!
I HAVE THIS COMBO UNIT MICROWAVE AND OVEN ON TOP AND OVEN AT THE BOTTOM. THE TOP UNIT , THERE IS NO POWER TO IT. WHAT WOULD BE THE COMMON PART THAT NEED TO BE REPLACED?
Hello Shawn, thank you for your question. First check to see if the fuse PS10060777 has blown. Next, test the door switches PS10060778, PS8727790. We hope this helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave was sparking
12 of 16 peoplefound this instruction helpful.
Nancy from ST AUGUSTINE, FL
Very Easy
Less than 15 mins
Screw drivers
Replaced the wave cover. Unscrewed existing cover that is at the top inside the microwave. Screwed in the new cover. Took about 30 seconds to do. Bosch service wanted over $100 for a service call plus parts and labor. Did it myself in seconds for under $10.
Was this helpful?
Thank you for voting!
Fuse blows on powering up, one door secondary switch was short
Thermal switch on top of Magnetron was defective, spade contacts were burned and loose. New switch $6 +shipping. Removed top cover held on with several Philips head screws. Plugged unit in and gave it 30 seconds to test the fan was working, it was. Put 500ml water in cavity, ran it for 60 seconds, which after fiddling with wires it did,
... Read moreand got over 20C temp rise so magnetron was working (detailed instructions online). Switch is right on top of magnetron. Tried to remove spade lugs but lugs pulled out of switch so I cut the lugs off and removed the broken switch. Screwed down new switch using old hardware. Trimmed wires back and cleaned them. Used crimping tool to put on new spade lugs from car parts store. put heat shrink over lugs and wires to strain relief and buttoned the unit up. Microwave works fine and oven baked a cake so good repair.
My Orders
