HGS7052UC (04) Bosch Range - Overview

This burner grate foot assembly includes the rubber foot and insert. Burner grate feet are an important part of your range or cooktop, not only do they help prevent the burner grate from scratching the surface of the range or cooktop, they also allow you to safely use the burner. Burner feet help ensure the burner is both level and stable...Read more, so when you place your cookware on top it stays in place, and does not interfere with the burner head. You will need to replace burner grate feet on your appliance if they are damaged or lost. Before you begin any repair work on your range or cooktop make sure it is unplugged, and make sure the gas supply has been shutoff. This is one individual burner grate foot.

If your gas oven is not heating at all, or not heating properly the most commonly problem is a faulty igniter. The bake igniter is used in gas overs and ranges, the element in the igniter gets hot enough to ignite the gas that lights the oven burner. This bake igniter assembly features a wire harness and push-on wire terminal ends for eas...Read morey installation. Handle this replacement part with care, do not touch the element inside the igniter as it is very fragile. Before you replace this part make sure you have unplugged your oven and shutoff the gas supply.

This electrode is a replacement ignition or sensing component designed to initiate or monitor operation through an electrical spark or signal. It supports reliable performance and is commonly replaced when ignition becomes unreliable or fails completely.

Broil ignitors are used in gas oven and ranges. These igniters are used the ignite the gas that lights the oven burners. If the broil burner on the roof of your appliance will not light you may need to replace the broil igniter. Before starting this repair, you need to unplug your appliance, remove the oven door, and the racks inside. You...Read more then need to remove the screws that hold the burner and shield assembly to the roof of your oven. Remove the screws holding the igniter in place, and disconnect the wire lead. Position and secure the new igniter, and reconnect the wire lead. Then reinstall the burner, the racks and the door. Handle this replacement part with care, make sure you do not touch the element on the igniter as it is fragile.

This display module is also known as an oven control board. This part is the brain of your appliance. It monitors and displays the internal temperature of your range oven. The control board allows you to control the heating functions of the appliance. You can set the desired cooking temperature, select if you want the bake, broil, or warm...Read more function, and set a timer. This digital display will also function as a clock when the oven is not in use. Before you replace this part you should check it with a multi-meter to ensure it is faulty. Problems with the control board are often misdiagnosed. This replacement display module also included the filter.

This sensor monitors critical conditions inside your appliance, such as temperature or moisture, to ensure optimal performance. Its precise design helps maintain efficiency and prevents common issues like overheating or inaccurate readings.

This high-quality oven door gasket creates a secure seal around the oven door, helping to keep heat inside for consistent cooking and improved energy efficiency. Designed for durability, it includes mounting clips for easy installation and ensures your oven maintains proper temperature regulation. Ideal for resolving issues such as air le...Read moreaks or doors that don’t close properly, this gasket enhances baking performance while reducing heat loss. To install, simply remove the old seal and attach the new one following your appliance’s instructions.