HGS345UC Bosch Range - Overview

If your gas oven is not heating at all, or not heating properly the most commonly problem is a faulty igniter. The bake igniter is used in gas overs and ranges, the element in the igniter gets hot enough to ignite the gas that lights the oven burner. This bake igniter assembly features a wire harness and push-on wire terminal ends for eas...Read morey installation. Handle this replacement part with care, do not touch the element inside the igniter as it is very fragile. Before you replace this part make sure you have unplugged your oven and shutoff the gas supply.

This electrode is a replacement ignition or sensing component designed to initiate or monitor operation through an electrical spark or signal. It supports reliable performance and is commonly replaced when ignition becomes unreliable or fails completely.

Broil ignitors are used in gas oven and ranges. These igniters are used the ignite the gas that lights the oven burners. If the broil burner on the roof of your appliance will not light you may need to replace the broil igniter. Before starting this repair, you need to unplug your appliance, remove the oven door, and the racks inside. You...Read more then need to remove the screws that hold the burner and shield assembly to the roof of your oven. Remove the screws holding the igniter in place, and disconnect the wire lead. Position and secure the new igniter, and reconnect the wire lead. Then reinstall the burner, the racks and the door. Handle this replacement part with care, make sure you do not touch the element on the igniter as it is fragile.

This sensor monitors critical conditions inside your appliance, such as temperature or moisture, to ensure optimal performance. Its precise design helps maintain efficiency and prevents common issues like overheating or inaccurate readings.