If your gas oven is not heating at all, or not heating properly the most commonly problem is a faulty igniter. The bake igniter is used in gas overs and ranges, the element in the igniter gets hot enough to ignite the gas that lights the oven burner. This bake igniter assembly features a wire harness and push-on wire terminal ends for eas...Read morey installation. Handle this replacement part with care, do not touch the element inside the igniter as it is very fragile. Before you replace this part make sure you have unplugged your oven and shutoff the gas supply.
Broil ignitors are used in gas oven and ranges. These igniters are used the ignite the gas that lights the oven burners. If the broil burner on the roof of your appliance will not light you may need to replace the broil igniter. Before starting this repair, you need to unplug your appliance, remove the oven door, and the racks inside. You...Read more then need to remove the screws that hold the burner and shield assembly to the roof of your oven. Remove the screws holding the igniter in place, and disconnect the wire lead. Position and secure the new igniter, and reconnect the wire lead. Then reinstall the burner, the racks and the door. Handle this replacement part with care, make sure you do not touch the element on the igniter as it is fragile.
This sensor monitors critical conditions inside your appliance, such as temperature or moisture, to ensure optimal performance. Its precise design helps maintain efficiency and prevents common issues like overheating or inaccurate readings.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael - For model number HGS245UC-01
December 29, 2023
Hi , l am looking for the parts / orifices for natural gas , currently my stove is set up for LP and l need to change it for natural gas
Hello Michael, thank you for getting in touch. We have researched and found that the orifices for your model do not come separately and come as a part of the orifice holders. following is the list of orifice holders with their respective burners:
1. Orifice holder, part number PS8713636, for the left front burner.
2. Orifice holder, part number PS8713637, for the left rear burner.
3. Orifice holder, part number PS8713639, for the right front burner.
4. Orifice holder, part number PS8713638, for the right rear burner.
We hope this helps!