Keep your stove working like new with this energy regulator. It controls the heat for your surface elements, turning them on and off to keep cooking temperatures steady. If your burner isn’t heating properly or seems too hot, replacing this part can help restore smooth, reliable performance. For best results, have a technician install it.
This sensor monitors critical conditions inside your appliance, such as temperature or moisture, to ensure optimal performance. Its precise design helps maintain efficiency and prevents common issues like overheating or inaccurate readings.
This broil element is found on the roof of ovens and ranges, it generates the heat required for the broil function of your appliance. If your oven will not get hot when the broil function is selected, you may have a problem with the element. To replace this part you will need to unplug your appliance, open the oven door, remove the two wi...Read morere leads attached to the element terminals, and the four screws holding the element in place. Once you have safely removed the faulty element, you then place the new element in the same spot, attach the four screws that hold it securely to the roof of the appliance, and connect the wire leads. This broil element is 3259 Watts.
This high-quality oven door gasket creates a secure seal around the oven door, helping to keep heat inside for consistent cooking and improved energy efficiency. Designed for durability, it includes mounting clips for easy installation and ensures your oven maintains proper temperature regulation. Ideal for resolving issues such as air le...Read moreaks or doors that don’t close properly, this gasket enhances baking performance while reducing heat loss. To install, simply remove the old seal and attach the new one following your appliance’s instructions.
This inner door glass pane is designed to replace the middle heat-resistant glass layer within an oven door, helping maintain safety, insulation, and proper oven performance. It supports structural integrity while allowing users to see inside the oven during cooking, all while withstanding high operating temperatures. Commonly replaced wh...Read moreen the original glass becomes cracked, shattered, or damaged, this panel helps restore both the appearance and secure operation of the oven door. Designed for a precise fit, it ensures proper alignment within the door assembly and reliable thermal protection during everyday use.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anton - For model number HES236UC
November 29, 2024
preheat takes much longer to reach temperature setting
Hello Anton, thank you for your question. Some basic concerns are Opening the Oven Door, Faulty Heating Element or a deteriorating Door seal. A Defective Temperature Sensor PS8713149 can alter the oven’s normal internal temperature. If the oven seems to be heating inconsistently or takes an unusually long time, the Control Board PS8715686 might be the issue. We hope this helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broiler element stopped working
4 of 7 peoplefound this instruction helpful.
Wayne from GLASTONBURY, CT
Very Easy
Less than 15 mins
Screw drivers
Step 1: Call the appliance store and ask the repairman to look at the problem. Step 2: Wait 10 days. Step 3: Have repairman tell you the broiler element stopped working. He states he will order the new part and charges $80 for the visit. Step 4: Wait 4 weeks, then call the repairman and have him tell you the part is backord
... Read moreered. Step 5: Wait another 4 weeks, periodically calling the repairman to be told assorted stories about the backordered part. Step 6: Go to partselect.com, and within 10 minutes order the part. Step 7: Receive the part in 2 DAYS. Step 8: Remove the old broiler element (only 4 screws to remove) and slide off the 2 electrical connections. Step 9: Connect the new broiler element, push the electrical wires back into the panel and replace the 4 screws. Step 10: Tell the repairman to go to ****