Models > HE026A-AS00
HE026A-AS00 Kawasaki Edger - Overview
Sections of the HE026A-AS00[Viewing 13 of 13]
Keep searches simple, eg. "belt" or "pump".
PartSelect #: PS9156129
Manufacturer #: 92071-2142The Fuel Tank Grommet is a 1-inch, black, rubber part. It attaches to the fuel tank so you can run your fuel lines through it, and is rated as "Easy" to install by most of our customers. If worn or da...
PartSelect #: PS8998548
Manufacturer #: 51048-2078The Fuel Cap Assembly, is a black, plastic cap that keeps fuel inside the tank, and debris out. If broken, fuel will begin leaking out and it must be replaced. Installation is rated as "Easy", the par...
PartSelect #: PS8977546
Manufacturer #: 49043-2067The Primer, or priming pump, is a plastic part that attaches to the carburetor. It's rated as "Easy" to install by most of our customers. This part is used to pump fuel from the fuel tank to the carbu...
PartSelect #: PS9160186
Manufacturer #: 92191-2102This Fuel Line (3x5x182) is a 7.25-inch-long rubber part which is installed inside the fuel tank to the carburetor. It runs from inside of the fuel tank and attaches to the fuel filter inside of the t...
Clamp, Fuel Filter
PartSelect #: PS9159838
Manufacturer #: 92171-2073The fuel filter clamp, is a silver, individually sold, metal part, used to secure the fuel line to the fuel filter. It attaches to the fuel filter and if broken, typically due to fatigue or damage, it...
PartSelect #: PS9891389
Manufacturer #: 14069-0013The Breather allows air to enter the tank, so no vacuum is created as the fuel level drops, which would prevent the flow of fuel to the carburetor.It seals in the gas emissions and fuel at the same ti...
Questions And Answers for HE026A-AS00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.