HDB921-01 Hotpoint Dishwasher - Overview

Diagrams for HDB921-01

See every part. Know exactly what you need.

Parts for the HDB921-01

$52.98

Dishwasher Water Inlet Valve

★★★★★

(8)

Part #WD15X93

This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

$26.40

Dishwasher Hose Clamp Kit

★★★★★

(2)

Part #WH1X2036

This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in diameter while the larger one is 2 inches in diameter. The hose clamps secure the end of the water hose in place to prevent the hose from le...Read more

Read less

$16.05

Dishwasher Clamp Sump

★★★★★

(1)

Part #WD1X1392

$35.80

Screw - Package of 12

Part #WZ4X345D

Portable Dishwasher Hose and Faucet Kit

Part #WD35X194

This kit comes complete with the hose and coupler for hooking up a portable dishwasher to a faucet. It also contains the faucet adapter and washer.

Lower Rack Roller with Clip

Part #WD12X5026

Sold individually. Order quantity required.

$48.45

COVER SUMP

Part #WD12X5028

$167.48

LATCH Assembly

Part #WD13X5014

$185.59

Lower Dishrack - Rack Only

Part #WD28X304

Wheels must be ordered separately.

ROLLER & STUD UPPER RACK

Part #WD12X10360

$32.63

ROLLER TUB

Part #WD12X5024

UNKNOWN

Part #WD12X5016

Common Symptoms of the HDB921-01

How this model fails, and the parts that fix it.

Will not fill with water

Not cleaning dishes properly

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Insufficient fill water, dishes not getting clean (valve diaphram had ruptured)

71 of 77 people found this instruction helpful.

Don from Mount Vernon, IL
Easy
30 - 60 mins
Nutdriver, Screw drivers, Wrench set

1. Remove lower cover skirt.
2. Shut of water at undersink valve.
3. Unplug power cord or turn off circuit breaker.
4. Disconnect water supply line from fill valve.
5. Unplug the electrical connector from the valve.
6. Remove the 2 valve mounting bracket screws.
7. With loose valve in hand, rotate to g ... Read more

Read less

Was this helpful?

Little/no water coming in & dirty dishes

17 of 19 people found this instruction helpful.

William from Polson, MT
Really Easy
30 - 60 mins
Pliers, Socket set, Wrench (Adjustable)

1. Remove access panel under door. 2.Shut off hot water.3. Shut off electric to washer.4. Disconnect water line from water inlet valve.5. Remove small outlet water line from valve. Replace valve & reconnect. OR !!! 1.Take solenoid valve & bracket off of original inlet valve 2. Pull out white plastic diaphragm cover. 3. Remove diaphragm & ... Read more

Read less

Was this helpful?

Thanks for sending the correct part. You guys did a great job.

4 of 4 people found this instruction helpful.

Albert from Dallas, TX
Really Easy
30 - 60 mins
Nutdriver, Pliers, Socket set, Wrench set

Just put the part on.

Was this helpful?