EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

HDA460-01AD Hotpoint Dishwasher - Overview

Diagrams for HDA460-01AD

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Silverware Basket (Grey) – Part Number: WD28X265
$79.80
In Stock
Silverware Basket (Grey)
★★★★★
★★★★★
(34)
Part #WD28X265
The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn out or broken, you should replace it with this part. No tools are required as it is an easy replacement. If you need further guidance refer to the instructions provided by the manufacturer. For safety precautions make sure to unplug the dishwasher and wear gloves.
Rinse Aid Fill Cap – Part Number: WD12X10284
$34.74
In Stock
Rinse Aid Fill Cap
★★★★★
★★★★★
(14)
Part #WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
Dishwasher Water Inlet Valve – Part Number: WD15X93
$52.98
On Order
Dishwasher Water Inlet Valve
★★★★★
★★★★★
(8)
Part #WD15X93
This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Fine Thread Telescoping Tower Power – Part Number: WD22X120
No Longer Available
Fine Thread Telescoping Tower Power
Part #WD22X120
This telescoping power tower comes in three sections.
Lower Rack Roller with Clip – Part Number: WD12X5026
No Longer Available
Lower Rack Roller with Clip
Part #WD12X5026
Sold individually. Order quantity required.
Door Gasket with Clips – Part Number: WD8X5097
No Longer Available
Door Gasket with Clips
Part #WD8X5097
This is a door gasket with clips, or a door seal, which attaches to dishwashers. It provides a watertight seal to keep water from leaking out of your dishwasher during a cycle. If your dishwasher leaks while it is locked and running, you will need to replace the gasket. This gasket is off-white and includes 30 plastic clips to help you install it.
Assembly SWITCH – Part Number: WD6X183
No Longer Available
Assembly SWITCH
Part #WD6X183
Lower Dishrack - Rack Only – Part Number: WD28X304
$185.59
Special Order
Lower Dishrack - Rack Only
Part #WD28X304
Wheels must be ordered separately.
TIMER KNOB – Part Number: WD9X252
$40.02
Special Order
TIMER KNOB
Part #WD9X252
DISCONTINUED – Part Number: WD28X303
No Longer Available
DISCONTINUED
Part #WD28X303
ROLLER TUB – Part Number: WD12X5024
$32.63
Special Order
ROLLER TUB
Part #WD12X5024
RACK STOP – Part Number: WD12X5044
$26.82
Special Order
RACK STOP
Part #WD12X5044

Common Symptoms of the HDA460-01AD

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Insufficient fill water, dishes not getting clean (valve diaphram had ruptured)
71 of 77 people found this instruction helpful.
  • Don from Mount Vernon, IL
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench set
1. Remove lower cover skirt.
2. Shut of water at undersink valve.
3. Unplug power cord or turn off circuit breaker.
4. Disconnect water supply line from fill valve.
5. Unplug the electrical connector from the valve.
6. Remove the 2 valve mounting bracket screws.
7. With loose valve in hand, rotate to g ain access to allow release of outlet hose clamp for hose removal.
8. Remove brass fitting from old valve and install on new valve. Use teflon tape on the pipe threads only.

Install new valve by reversing the procedure.
Was this helpful?
Thank you for voting!
Basket was lost
49 of 52 people found this instruction helpful.
  • Joseph from Elmendorf, TX
  • Really Easy
  • Less than 15 mins
Opened package from Parts Select.
Removed Silverware basket from package.
Opened Dishwasher.
Inserted Silverware Basket in rack.
Closed Dishwasher.
Discarded shipping package.
Told wife I fixed Dishwasher.
Sat down & had a beer.
Was this helpful?
Thank you for voting!
Lost Despenser Lid, Droped It And Havent Seen It Since.
26 of 32 people found this instruction helpful.
  • ANNE from SWANNANOA, NC
  • Really Easy
  • Less than 15 mins
Ordered the part, by using the diagram on the ge website identified the part and ordered it right them and when it came (delivered really fast) took it out of the bag and screwed it in the jet dry despenser and is working great.
Was this helpful?
Thank you for voting!