EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

HDA3640D00SA Hotpoint Dishwasher - Overview

Diagrams for HDA3640D00SA

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Rack Wheel Kit - 8 Pack – Part Number: WD35X21038
$49.50
In Stock
Lower Rack Wheel Kit - 8 Pack
★★★★★
★★★★★
(169)
Part #WD35X21038
This lower rack wheel kit includes 8 wheels and 8 axles that allow the lower dishwasher rack to slide in and out smoothly. If your dishwasher door will not close, is noisy when operating, or the dishes are not cleaning properly, you might need to replace one or more of the wheels. Each wheel and axle are made of plastic, and fit into one another so they can be clipped on to the lower dishwasher rack. Many of our customers found this repair to be quick and easy, and the only tool you should need to complete the repair is a pair of pliers.
Dishwasher Rack Slide End Cap – Part Number: WD12X10304
$22.52
In Stock
Dishwasher Rack Slide End Cap
★★★★★
★★★★★
(58)
Part #WD12X10304
The Rack Slide End Cap is a white one-inch plastic part which replaces the end cap for your dishwasher rack, preventing your rack from sliding too far. If you find the dish rack is causing the door to not close properly, it may be due to the part being worn out or damaged. All you need to complete this repair is a small flat blade screw driver. Simply pop out the cap with a smaller flat-blade screwdriver and snap the new one into place. If the rear cap needs to be replaced you will need to remove both front caps and slide the rack completely off for full access. It is important to note that this part is sold individually, and more than one may be required, depending on your repair. An inexpensive part, it can be a good idea to purchase several at a time to have on-hand when needed.
Upper Roller and Axle - Kit of 4 – Part Number: WD12X10327
$31.58
In Stock
Upper Roller and Axle - Kit of 4
★★★★★
★★★★★
(93)
Part #WD12X10327
The dishwasher roller assembly attaches to the upper dishrack. It allows the dishrack to slide out easily. If the upper rack keeps falling off the track in dishwasher, the door will not close, the door makes noises, and/or dishes are not cleaning properly, it is best to replace it for more security. A flat-blade screwdriver is the only tool needed for this installation. Slide open the upper dishwasher rack and remove the retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it, and replace the rollers. Remember to put back the tabs on each side before sliding it back in. Make sure the dishwasher is turned off before starting this repair.
LOWER RACK – Part Number: WD28X31819
$144.57
In Stock
LOWER RACK
★★★★★
★★★★★
(80)
Part #WD28X31819
This part includes the wheels.
Water Inlet Valve – Part Number: WD15X10014
$44.23
In Stock
Water Inlet Valve
★★★★★
★★★★★
(56)
Part #WD15X10014
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
Door Gasket - White – Part Number: WD08X10057
$79.71
In Stock
Door Gasket - White
★★★★★
★★★★★
(21)
Part #WD08X10057
This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.
Interlock Switch – Part Number: WD21X10261
$37.87
In Stock
Interlock Switch
★★★★★
★★★★★
(18)
Part #WD21X10261
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. The interlock switch senses the door is shut and the dryer can begin. This part might need to be replaced if your dryer is not starting or is in process while the door is open. The black rectangular part of the switch is approximately 2 inches long and a 1/2-inch wide with two gold plates on either end. This is a genuine OEM part that is sourced right from the manufacturer.
Rinse Aid Fill Cap – Part Number: WD12X10284
$34.74
In Stock
Rinse Aid Fill Cap
★★★★★
★★★★★
(14)
Part #WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
Hinge Arm Link – Part Number: WD14X10009
$16.05
In Stock
Hinge Arm Link
★★★★★
★★★★★
(9)
Part #WD14X10009
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In this case, you will need to replace the hinge link. Pull out your dishwasher to inspect the hinge and spring, if the link is broken, it may be disconnected and on the ground already. If not, you can remove the hinge arm link by simply disconnecting it from the hinge and spring, then replacing it with the new part. The hinge arm link is a small piece of white plastic about an inch and a half long. It is sold individually, and is an OEM part from the manufacturer.
Screw 8-16 hxw 1/2 Stainless Steel – Part Number: WD02X10067
$16.05
In Stock
Screw 8-16 hxw 1/2 Stainless Steel
★★★★★
★★★★★
(2)
Part #WD02X10067
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, ensuring stable and effective spray arm performance. Sold individually, this durable metal fastener requires a nutdriver for proper installation.
Drain Solenoid and Bracket Assembly – Part Number: WD21X10268
$48.45
In Stock
Drain Solenoid and Bracket Assembly
★★★★★
★★★★★
(12)
Part #WD21X10268
This valve opens in order for the water to drain out of the dishwasher.
Lower Spray Arm – Part Number: WD22X10055
$166.48
In Stock
Lower Spray Arm
★★★★★
★★★★★
(11)
Part #WD22X10055
This is a replacement lower wash arm assembly for your dishwasher. The lower spray arm is mounted to the bottom of your dishwasher tub and will rotate and spray water during the wash cycle. The spray arm has small holes that spray the water, and these can become clogged with debris and hard water buildup inside your dishwasher. The spray arm can also become jammed if silverware falls into the main tub during the cycle. These problems can cause the spray arm to malfunction, which will result in your dishes coming out of the dishwasher unclean. This part is made of white plastic and is sold individually.

Manuals & Care Guides for HDA3640D00SA

Click to download

Common Symptoms of the HDA3640D00SA

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The rollers on the upper rack broke
545 of 576 people found this instruction helpful.
  • Carl from Fairfield, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
There are eight guides that hold the rack rails in place. Use a Phillips screwdriver to remove the top two guides on each side in order to remove the rack from the dishwasher. The plastic axles on the rack and the rollers snap on. Use the hammer and punch to bend the metal clip on one end of the rail. Remove the plastic end piece the n slide the rollers out. Place two new rollers in the rail and put the plastic end piece on. Use the hammer and punch to bend the metal clip back into place. Snap the rails on the rack and set the rack on the guides in the dishwasher. Replace the top guide using the screwdriver, you will have to twist the rails in order get them in between the
guides.
Was this helpful?
Thank you for voting!
Lower rack wheel was melted
523 of 550 people found this instruction helpful.
  • Mark from Huntingdon Valley, PA
  • Really Easy
  • Less than 15 mins
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience.
Was this helpful?
Thank you for voting!
The rear wheels were missing on the lower rack.
475 of 489 people found this instruction helpful.
  • Teresa from Phenix City, AL
  • Really Easy
  • Less than 15 mins
The wheels came with a clip on part that clipped to the rack and the wheel snapped into that clip. I am a woman and it was easy for me to do. Thanks to Parts Select for being an easy to use and navigate site, for quick shipment and for good directions with the parts. Sincerely, Teresa from Alabama.
Was this helpful?
Thank you for voting!