This temperature sensor is an OEM replacement part designed for use in ovens/ranges. The sensor detects the temperature inside the oven and relays this information to the control board, which controls the heating elements in the oven. If the sensor experiences electrical failure or mechanical damage, you will likely notice uneven cooking,...Read more inaccurate temperature readings, and difficulties heating up the oven. You can access the sensor by either removing the back panel of your appliance or by reaching through the oven/range cavity from the front. Carefully disconnect the wires attached to the sensor and pull the sensor out of the appliance. Mount the new sensor in the correct position and reconnect the wires appropriately.
Ensure even cooking results with this convection fan motor for select wall ovens and ranges. This essential component powers the internal fan that circulates hot air throughout the oven cavity, promoting consistent heat distribution for baking and roasting. Built for durability and precision, it helps maintain optimal performance and cook...Read moreing quality. Common signs of a failing motor include the fan not turning, intermittent operation, loud grinding or squealing noises, or uneven cooking. Installation typically requires disconnecting power at the breaker and accessing the motor from the rear of the unit or through the oven cavity, depending on your model.
This power supply unit, also known as a relay board, is a critical electronic component designed for select wall ovens and ranges. It delivers power to the appliance’s control board and heating elements, ensuring consistent operation during cooking cycles. A failure in this unit can result in symptoms such as heating elements not activati...Read moreng, fluctuating oven temperatures, or unusual clicking or buzzing sounds. As a genuine replacement part, it is engineered for compatibility with models from Bosch, Thermador, Gaggenau, and some Kenmore appliances. Installation should be performed with care, and model compatibility must be confirmed prior to replacement to ensure proper function and safety.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven heating temp not turning off at set temp/overheating
9 of 17 peoplefound this instruction helpful.
Jaymie from Intercourse, PA
Easy
30 - 60 mins
Screw drivers
Removed the wall oven to access temp probe connector strapped to the back of the oven. removed 2 screws holding probe inside the oven & replaced. Searched for the "fixing kit" thermostat part I was suggested to replace along with the probe. No thermostat type part was found in my oven, even though Bosch says it fits "somewhere". Reinstall
... Read moreed the wall oven & tested. The temperature is working normal now. Will return the fixing kit.