Models > HAV4657EWW

HAV4657EWW Hoover Washer - Overview

Sections of the HAV4657EWW

[Viewing 9 of 9]

Manuals & Care Guides for HAV4657EWW

Click to download
Keep searches simple, eg. "belt" or "pump".
Drive Belt - 51 inches long – Part Number: WP21352320
Drive Belt - 51 inches long
★★★★★
★★★★★
(25)
PartSelect #: PS11738882
Manufacturer #: WP21352320
This V-style drive belt measures 51 inches long and 3/8 inches wide. The belt is made to slip on the motor pulley to bring the basket up to the speed required. Continued use can result in the belt suf...
$18.52
  In Stock
Lid Hinge – Part Number: WP35-2044
Lid Hinge
★★★★★
★★★★★
(24)
PartSelect #: PS11741780
Manufacturer #: WP35-2044
The lid hinge on your washer is connected to the lid and allows it to open and close. If you find you cannot open or close the lid to your washing machine properly, you may need to replace the lid hin...
$5.27
  In Stock
Lid Hinge Pin – Part Number: WP35-2045
Lid Hinge Pin
★★★★★
★★★★★
(9)
PartSelect #: PS11741781
Manufacturer #: WP35-2045
This lid hinge pin allows a washing machine lid to pivot open and closed properly. The hinge pin may need to be replaced if the lid will not open or will not close. The part is white and made of plast...
$14.57
  In Stock
Snubber Ring – Part Number: WP21002026
Snubber Ring
★★★★★
★★★★★
(15)
PartSelect #: PS11738845
Manufacturer #: WP21002026
The snubber ring is a piece that is specific to your washing machine. The function of the snubber ring is to reduce noise and vibrations within your washer. It fits in between the leg and the dome ass...
$7.03
  In Stock
Washer Drain Pump – Part Number: WP35-6780
Washer Drain Pump
★★★★★
★★★★★
(25)
PartSelect #: PS11741803
Manufacturer #: WP35-6780
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. If your machine is not draining properly or if it is noisy and s...
$99.30
  In Stock
Transmission Pulley and Bearing Kit – Part Number: 12002213
Transmission Pulley and Bearing Kit
★★★★★
★★★★★
(13)
PartSelect #: PS2003651
Manufacturer #: 12002213
This transmission pulley and bearing kit, also known as thrust bearing kit or washer pulley and bearing kit, includes the pulley, washer, thrust bearing, two upper race washers, and one lower race was...
$56.53
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.52
  In Stock
Hose Clamp – Part Number: WP596669
Hose Clamp
★★★★★
★★★★★
(1)
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$5.52
  In Stock
Motor with Pulley – Part Number: WP21001950
Motor with Pulley
★★★★★
★★★★★
(6)
PartSelect #: PS11738839
Manufacturer #: WP21001950
This motor is a 2 speed, 1/2 HP, 120V, 60Hz.
$132.35
  In Stock
Suspension Springs - Kit of 6 – Part Number: 12002773
Suspension Springs - Kit of 6
★★★★★
★★★★★
(6)
PartSelect #: PS2004049
Manufacturer #: 12002773
This package contains a new set of six springs. The suspension springs in your washer connect to the bottom of tub, and help to hold it in place. If your washer tub shakes, or moves around a lot durin...
$45.07
  In Stock

Questions And Answers for HAV4657EWW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Randy
    February 9, 2020
    Why would the agitator be going in spin cycle?
    For model number HAV4657EWW
    Hello Randy, Thank you for your question. If the agitator is agitating during the spin cycle, its likely an issue with the transmission gear case is available through the transmission and seal kit under part PS2347190 for your model. We hope this helps.

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Common Symptoms of the HAV4657EWW

      [Viewing 14 of 14]
      Shakes and moves
      Fixed by
      these parts
      Show All
      Noisy
      Fixed by
      these parts
      Show All
      Leaking
      Fixed by
      these parts
      Show All
      Burning smell
      Fixed by
      these parts
      Show All
      Pumps but will not spin
      Fixed by
      these parts
      Show All
      Will not agitate
      Fixed by
      these parts
      Show All
      Will not drain
      Fixed by
      these parts
      Show All
      Lid or door will not open
      Fixed by
      these parts
      Show All
      Spins slowly
      Fixed by
      these parts
      Show All
      Lid or door won’t close
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Will not stop filling with water
      Fixed by
      these parts
      Show All
      Timer will not advance
      Fixed by
      these parts
      Show All
      Noisy
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      One of the plastic hinge pins brroke
      I used a flat screw driver to push in on the releases so I could raise the top of the machine. I then used a torx tool to remove both parts of the hinge, and then used a #2 phillips screw driver, on the new screws I'd also ordered, to re-attach both of the hinge parts. Every thing went just as anticipated.
      Parts Used:
      Lid Hinge Pin Lid Hinge Screw
      • Allen from North Little Rock, AR
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      505 of 504 people found this instruction helpful.
      Pump was making a grinding noise
      The pump is located behind a small panel on the back, lower left side of my washer. It's attached to the bottom frame with 3 screws. It has two hoses attached, each with one spring clamp. Lift one side of the washer and slip the drive belt off the pully. Release the spring clamps on the hoses with a pair of pliers and remove the hoses. A small amount of water will drain from the hoses and pump when removed. Remove the three screws holding the pump to the frame and remove the pump. Install the new pump in the same position. Reattach the hoses, replace the belt, and reinstall the cover panel. That's all there is to it.
      Parts Used:
      Washer Drain Pump Drive Belt - 51 inches long
      • Ranse from Layton, UT
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Socket set
      291 of 311 people found this instruction helpful.
      The belt and pulley on the drive motor broke
      unplug the washer. Removed the top of the washer by removing the hold scews and tabs on the upper back. Place a scew drive under the front and pry up to release the snap tabs. Then the front panel by removing the two screws on top and lift the panel up to expose the motor at bottom front. Remove the motor cover (plastic)and motor from the base, replace the pulley on the shaft (you may need to break or pry the old pulley off) install the new pulley making sure it is all the way up the shaft locking the tabs into the shat groove. Reinstallmotor to the base. To replace the belt, tilted the unit backwards to access the pulleys from the bottom and installed.
      Note: it ios easier to install the belt fully on the two smaller puleys attcahed to the drive motor and pump and then wrap as much as you can around the larger drum pulley. Hold the belt in one hand and turn the drum pulley clockwise with the other and the belt will follow and install. reverse steps to reassemble.
      Parts Used:
      Motor with Pulley
      • Michael from Warminster, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers, Wrench (Adjustable)
      146 of 183 people found this instruction helpful.