H70SS (41ADH70G995) MTD Trimmer - Overview

This Switch is a black, plastic on/off switch for a trimmer. Installation of this manufacturer-certified switch is rated as "Easy" and requires a screwdriver, wrench set and socket set. Refer to your make, model, and diagrams to ensure this switch is correct for you.

This is a genuine OEM replacement part. it is sold individually. The Bump Head Knob Assembly is the part of the trimmer that you bump on the ground to advance the cutting line from the spool. Because of the abuse this part gets, it is advisable to order an extra one so you have on on hand. LEFT HAND THREADED

This genuine OEM throttle trigger allows you to control the engine speed of your trimmer by squeezing or releasing it, which engages the throttle cable. It is conveniently located on the handle assembly for easy access during operation. If you experience stickiness, looseness, or unresponsiveness, the throttle trigger is faulty and requir...Read morees replacement. A malfunctioning throttle trigger makes it difficult to control the engine speed, leading to challenges in starting the trimmer, maintaining a consistent speed, or adjusting power as needed. To replace the throttle trigger, you will need a screwdriver with a Torx bit. First, remove the fasteners holding the throttle housing, then separate the two halves of the housing. Disconnect the lever from the throttle cable and remove it, along with the spring, from your trimmer. Please note that the throttle trigger is sold separately from the throttle cable and spring.

This shoulder strap is an authentic manufacturer-sourced part that is designed for use in a variety of lawn and garden equipment. It is an adjustable strap made of durable synthetic material that is worn over the shoulder. The strap features one plastic slide adjuster and one metal clasp that secures it to the equipment. It is designed to...Read more reduce strain on the arms, shoulders and back when using the equipment over a long period. It also stabilizes the equipment for easier handling. Over time the strap can wear down, or the clasp and adjuster may break, leading to discomfort and strain. Detach the old strap from the equipment and clasp the new strap onto the attachment points. Adjust the length using the plastic adjuster until the strap sits comfortably on your shoulder.

The anti-rotation screw attaches to the lower handle clamp. This item is priced individually and is made out of metal. It is a genuine replacement part used in compatible tillers, trimmers, and blowers made by Ryobi, Troy-Bilt, MTD, Bolens, Yard Man, Yard Machines, and Cub Cadet. A torx screwdriver will be needed during the installation process. It will need to be replaced if it becomes stripped or broken.

The spring fits between the outer spool & eyelet assembly and the inner reel. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers made by Ryobi, Troy-Bilt, Bolens, Yard Man, MTD, and Cub Cadet. A screwdriver might be necessary when replacing this part if it becomes broken or bent. This part is made out of metal and is available individually.

The inner reel goes between the bump head knob and the outer spool & eyelet. It is made of plastic and is sold individually. The reel is a genuine replacement part for trimmers made by MTD, Ryobi, Troy-Bilt, Bolens, Yard Man, and Cub Cadet. This part may become broken and will need to be replaced. A screwdriver might be required when replacing this part.

The metal screw attaches to the gear box housing assembly. This is a genuine Ryobi, Troy-Bilt, Bolens, Yard Man, MTD, and Cub Cadet replacement part for use in tillers and trimmers. This item is available as an individual replacement part even though several may be needed. A torx screwdriver will be needed during the replacement of this part. It will require replacing if it becomes stripped or broken.

This genuine manufacturer-sourced part is specially designed for use with handheld trimmers. The part helps to drive the blade, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this hardware. It is an identical replacement for a missing or a faulty blade ...Read moredriver that was installed on a new unit. Keep in mind this high-quality item is made of durable metal and is sold individually.

This part is an OEM from Ryobi, Troy-Bilt, Bolens, Yard Man, MTD, and Cub Cadet for use in trimmers. The outer spool & eyelet assembly goes between the spool shaft and the spring. It might require a screwdriver to replace this item if it becomes broken. This is made of plastic and metal and is sold as a pair that contains both parts.

The Screws are sold separately.

This is a genuine Ryobi, Troy-Bilt, Bolens, and MTD replacement part for use in blowers and trimmers. The bump head attaches to the drive shaft. A strap wrench may be needed during the replacement of this part. It is made out of durable materials and will need to be replaced if it breaks. This item is sold individually.