My Orders
H30-35500Y Tecumseh Engine - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.30
In Stock
Air Filter
Part #35066
It is an authentic high quality OEM supplied replacement air filter that is used on Husqvarna and Yard Man lawn and garden equipment. Its purpose is to remove dust and debris from contaminating the carburetor. One durable pleated paper filter is included per order.
$6.40
In Stock
Screw
Part #650926
This is an authentic OEM sourced replacement part, it is specially made for use with lawn and garden equipment. It is a standard hardware which has multiple applications depending on your model, please refer to appropriate diagrams for correct location and use of this item. Please note this high-quality hex head screw is sold individually.
$48.39
In Stock
Fuel Tank
Part #35591A
This genuine OEM sourced replacement fuel tank is a high-quality item that is specially designed for use with Husqvarna handheld lawn and garden equipment. Its purpose is to hold the fuel that is needed for the engine. Over time the tank may get damaged or lost eventually requiring a replacement. It includes the fuel tank, the cap, the fu...Read moreel lines and the clamps to secure them. Make sure to drain the gas tank before starting the repair.
Read less
No Longer Available
Fuel Line Clamp
Part #26460
The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.
$5.28
Special Order
Gasket
Part #26756
This item is available as an individual replacement part. The gasket attaches to the intake pipe and is made out of a thin material. During replacement, it may require a screwdriver to help install this part correctly. It will require replacing if it breaks. This genuine item is supplied by the original equipment manufacturer for use with...Read more lawn mowers, lawn tractors, and snowblowers made by Tecumseh, Toro, and Lawn Boy.
Read less
$6.40
Special Order
Screw (1/4-15x7/8)
Part #650665
This is a genuine replacement part that has been sourced from the original manufacturer to be used with snow thrower engines from Husqvarna and Toro. The metal screw is used to fasten the fuel tank to the tank mounting bracket. This item is available as an individual replacement part, please note a hex socket wrench may be needed to install this item.
$53.05
Special Order
Control Assembly
Part #36677
This is an OEM part sourced directly from the manufacturer. The control assembly is found in Toro snow throwers and tillers and in Husqvarna engines. This part includes three metal brackets, a plastic control knob, and hardware for attachment. It is generally connected to the blower housing baffle. You may require a screwdriver and wrench when replacing these parts.
No Longer Available
Air Filter (tec. 30727)
Part #30727
This paper air cleaner element, also known as an air filter, is sourced from the original manufacturer for use in outdoor power equipment. It has an outer diameter of 4.25 inches and a height of 3 inches. The air filter is responsible for removing dirt and debris from the air before it enters the engine to keep the engine free from contam...Read moreinants. Over time, it is normal for the paper on the filter to tear or become clogged, thereby restricting airflow, increasing fuel consumption, and damaging the engine. Regularly inspecting and replacing the air filter is critical to maintaining the performance of your engine. To begin this repair, locate the air filter housing near the engine or carburetor and remove the cover. Carefully remove and discard the old filter, making note of its position. Clean the air filter housing and insert a new, clean filter in the correct position. Place the cover back onto the housing and ensure that it is tightly fitted to prevent air leaks.
Read less
$6.40
In Stock
Screw, 10-32x49/64"
Part #650932
This part is an OEM from Husqvarna. The screw (10-32x49/64 & #34) is made for use with many lawn mower engines, and is sold individually. The metal screw is often used to secure the engine air cleaner collar. A screwdriver and pliers are helpful with making the replacement.
$5.27
Special Order
Knob, Control
Part #35440
$37.74
In Stock
Fuel Line
Part #740017B
The fuel line is a rubber hose that is responsible for allowing the fuel tank to supply the carburetor and various engine components with fuel. This fuel line is designed to be compatible with various types of lawn equipment and is an authentic OEM part. Because it interacts with gas and oil frequently, it will eventually become brittle a...Read morend crack and need to be replaced. To replace it, you will need to drain the fuel from your equipment, remove the clamps securing the ends of the line, and then swap out the old line for the new, before installing the clamps back. Make sure to check the fuel line frequently for cracks and damage to prevent any leaks from harming your equipment and to maintain its health and performance.
Read less
$7.64
In Stock
Breather Tube
Part #35350
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Leaking gasoline from carburetor bowl. No air filter
1 of 2 people
found this instruction helpful.
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After abo
... Read more
ut 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Read less
Other Parts Used:
![Screw, 10-32x49/64" – Part Number: 650932](/9293091-1-S-Tecumseh-650932-Screw-10-32x49-64-amp-34.jpg "Screw, 10-32x49/64" – Part Number: 650932")
Was this helpful?
Thank you for voting!