GXV120 (Type A21) Honda Engine - Overview

This is an authentic Honda replacement part. This part is used in Honda engines. It consists of a high-quality plastic frame with pleated fabric filter, and is used to remove dust and debris as the engine runs. Please be aware that there may be more than one model of air cleaner. Use the parts diagram to be sure you order the right pa...Read morert for your engine model. You will require a screwdriver to replace this item. This is a common wear part. We recommend ordering a spare.

This is an authentic Honda replacement part. The stud bolt is designed by the manufacturer for use in small engines and lawn mowers. This part is made of metal, and may be found in various locations in the machine, depending on model. You may require a wrench when replacing this part. This item is sold individually.

This is an authentic Honda replacement part. This outer filter is used with small engines that are commonly installed on a variety of lawn and garden equipment. It is made of high-quality foam material and is used to remove dust and debris as the engine runs. Over time it may wear out and get clogged eventually requiring a replacement. No...Read morete, this part is sold individually. Refer to the owner's manual for the correct application.

This part is an OEM sourced directly from the manufacturer for use in Honda small engines, lawn mowers, and tillers. The oil pan gasket goes between the cylinder and the oil pan. When replacing this part a screwdriver, a set of pliers, and a socket set might be required during the installation process. It will need to be replaced if it breaks. The gasket is sold individually and is made of a thin material.

This is an authentic part that is supplied directly from the original equipment manufacturer for Honda engines. The carburetor mixes air and gas before the fuel mix goes to the engine. This part comes with the carburetor assembly, as well as the carburetor gasket. Let the engine cool and drain the gas tank before starting this repair. You may need screw drivers and pliers to aid you in this repair.

This is an original Honda replacement part. The carburetor insulator is designed by the manufacturer for use in engines and lawn mowers. This part is made of high-quality plastic, and is used to protect the carburetor assembly from the heat of the engine. You may require a screwdriver when replacing this item. This product is sold individually.

This star drag spring is a genuine part which is supplied by the original manufacturer for use with Honda engines that are commonly installed on a variety of lawn and garden equipment. The spring applies tension on the connected governor. Over time it can wear out, get damaged or lost eventually requiring a replacement. Check the diagrams...Read more for your model to ensure the correct repair procedure. This spring is made of high-quality metal and is sold individually. A screwdriver and a wrench set might be needed to replace this hardware.

This is an OEM part sourced directly from the manufacturer. The petcock assembly is designed for use in Honda small engines and lawn mowers. This part includes the petcock, two clamps, and several rubber tubes. It is used to control the flow of fuel through the machine. You may require pliers when replacing these parts.

This is an authentic Honda replacement part that has been sourced from the original manufacturer to be used with small engines. The gasket is used to seal the connection between the carburetor insulator and the cylinder assembly. It is recommended to replace gaskets when servicing the engine to ensure proper seals when the parts are reassembled.