My Orders
GXUV10Z01 General Electric Water Filter System - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
O-ring on my under-the-sink water filter had broken
3 of 4 people
found this instruction helpful.
-
Dennis from Burke, VA
- Really Easy
- Less than 15 mins
I simply replaced the old O-ring; rubbed a bit of petroleum jelly around the seal and rescrewed the filter cannister back in place. It was easy, and worked like a charm!
Was this helpful?
Thank you for voting!
water filter cartridge over a year old, needed changing
-
John from Alameda, CA
- Really Easy
- 15 - 30 mins
-
Wrench set
With this whole house water filter in line with the water heater line, I could see the filter was dirty because of the clear water filter housing and the original filter was white. I used a manufacturer supplied spanner wrench and turned off the water first, then unscrewed the filter housing and replaced with the new white filter cartrid
... Read more
ge, then re-installed the cartridge housing. The old one was visibly full of dirt because it was nearly black with sediment. I like the original equipment cartridge because it is white, other charcoal filters are black so you can't tell when they are full of dirt.
Read less
Was this helpful?
Thank you for voting!