GX620QXAP Honda Engine - Overview

This is an authentic Honda replacement part, sourced from the original manufacturer for use with small engines. The special hex head bolt is commonly used to secure the ignition module assembly. This flanged bolt is available as an individual replacement part, please see illustrated part list for associative parts.

It is a genuine item that is supplied by the original manufacturer for use with Honda engines commonly installed on a variety of lawn and garden equipment. This is one of the flange nuts that are utilized to secure the exhaust manifold. A flange nut is designed to provide a tight fit and resist loosening. Replacing it is a simple task tha...Read moret should only require a wrench to remove and secure it. To ensure the correct location, please refer to the diagrams of your model. One durable metal nut-flange is included.

An authentic OEM supplied part that is specially designed for use with Honda engines commonly installed on lawn and garden equipment. This is one of the gaskets that helps to provide an air-tight seal for the air cleaner, for correct location and use make sure to check appropriate diagrams of your model. Over time gaskets and seals tend t...Read moreo wear out and may crack eventually requiring replacement to maintain peak performance. It is a high-quality component that is made of durable rubber and it is sold individually.

The flange bolt is used to secure parts together in a variety of lawn and garden outdoor equipment. It is sourced directly from the manufacturer and has a diameter of 6mm and a length of 12mm. The bolt is made of metal and has a ring-shaped rim on one end known as a flange. This flange helps to secure the bolt in place and prevents it fro...Read morem falling off during use. Inspect all the bolts on your equipment as you may need more than one. If you note that any of them are deformed, corroded or the threads are worn down, you will need to replace them as each bolt is sold individually. Remove the damaged bolt and thread the new one on with your hands before tightening with a wrench.

This is an authentic manufacturer-sourced replacement part which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. This special gasket provides an air-tight seal for the head cover, over time gaskets tend to deteriorate and crack eventually requiring a replacement to maintain a proper seal. ...Read moreIt is a high-quality component which is made of durable composite material and it is sold individually.

A genuine OEM sourced replacement part that is specially produced for Honda egnines. This is the main fan that is helping to keep the engine cool. This cooling fan is made from durable plastic and it is sold individually, please note the hardware to secure this item is sold separately.

The 6x8 flange bolt has a lot of applications on various equipment, but is generally designed to secure and lock parts in place. Common on lawn and garden equipment and engines, this flange bolt is silver in color, made of metal, and can become broken over time due to wear and tear. You will need a wrench or socket and torque wrench whe...Read moren making this repair, which is generally easy, but a lot depends on the location and nature of the part it attaches to.

This OEM-manufactured flange bolt provides a secure connection between two parts of your equipment. What is different about a flange bolt is that it has a wide, flat flange at the end. This helps to distribute the load being applied to it and prevents the bolt from becoming loose. Flange bolts are commonly found in lawn equipment, but the...Read moreir location varies by the make and model of the machine. When damaged, the part that the flange bolt was holding may loosen and fall off. You also may observe that it the flange bolt is cracked or corroded. It is important for you to replace broken flange bolts immediately as loose or vibrating parts can detach from your equipment while it is operating. You need a socket wrench to remove a flange bolt, as well as rust dissolver or penetrating oil if it is stuck. This replacement part is sold individually so make sure that you consult your user guide to identify where your flange bolts are and how many your equipment needs.

The carburetor gasket fits between the carburetor insulator and the carburetor. This part is priced individually and keep in mind that two may be needed. It is made of a thin flexible material and can break easily and will need to be replaced. A screwdriver, socket set, and wrench set all may be needed during the replacement of this item....Read more It is a genuine OEM sourced part which is specially designed for use with Honda small engines.

This replacement tank assembly is supplied directly from the original equipment manufacturer for Honda engines that are commonly installed on a variety of lawn and garden equipment. This part is an electrical component that is used to convert alternating current (AC) to direct current (DC). Over time it may wear out or get damaged eventua...Read morelly requiring a replacement. This high-quality rectifier assembly is sold as an individual item. A screwdriver will be needed to perform this repair.

This is an authentic manufacturer-sourced replacement part which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is a special component that provides a tight seal for the crankshaft, over time it may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality item is made of durable rubber and is sold individually.

This flange bolt is a genuine OEM replacement part for use in lawn and outdoor equipment. It has a diameter of 6mm and a length of 12mm. The bolt has a wider circular area that protrudes out from the bolt head, known as a flange. The flange prevents the bolt from moving or loosening during use. Over time the bolt may corrode, crack, or it...Read mores threads may wear down. In this case the bolt will need to be replaced. Visually inspect the other bolts in your equipment to ensure your order the correct number, as each bolt is sold individually. Use a wrench to remove any faulty bolts and install the new bolts in place. Be careful not to overtighten your bolts as you may risk damaging the equipment and the bolt.