GX270RT (Type VPE5) Honda Engine - Overview

This is an original Honda replacement part that is manufactured for use with small engines. The purpose of the Air Cleaner Element is to filter dirt and debris from entering the engine and clogging it, therefore, comprimising the performance of the engine. Over time the air cleaner element will clog and needs to be replaced. This foam filter is an individually sold part.

This genuine OEM oil filler cap assembly is part of your lawn equipment, found commonly on the top or side of the engine. It covers the oil fill hole on the engine so that oil does not spill out and impurities do not get in. A broken cap may be visibly damaged and will not properly seal the oil fill hole. If you do not replace it, the oil...Read more may become contaminated with dirt, reducing the lifespan of your engine. To remove the cap from your machine, gently grip onto it and rotate it counterclockwise. You can lift the cap straight up afterwards. This part is sold individually.

This is an authentic replacement part manufactured for use with Honda small engines. The ignition coil creates and electric charge that is sent to the spark plug that creates an arc to ignite the fuel/air mix in the cylinder. A failing or worn out ignition coil will cause difficulty starting the engine and could lead to a non-start situat...Read moreion, and the ignition coil will need to be replaced. This ignition coil is sold as an individual replacement part.

It is a genuine manufacturer-approved replacement gasket which is designed for use with Honda engines that are commonly installed on lawn and garden equipment. The purpose fo this part is to create an air-tight seal between the carburetor and the stay assembly, please make sure to check appropriate diagrams of your model for correct locat...Read moreion and use of this item. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is made of durable composite material and it is sold individually.

This is an authentic replacement part sourced directly from the manufacturer. The stop switch wire is commonly found in Honda small engines. This part is made of metal wire with a flexible plastic casing, and is used to send signals from the engine stop switch to the engine. You may require a wrench and pliers when replacing this item. This product is available as an individual replacement part.

This is a genuine Honda part sourced directly from the manufacturer for use in engines. The air cleaner wire clip is made of metal. A set of pliers might be helpful during the installation of this item. It may become bent or broken and will need to be replaced. This part is sold individually.

This authentic manufacturer-sourced component is specially designed for Honda engines that are commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Make sure to refer to the appropriate diagrams for your specific model for the exact location a...Read morend the correct application of this clip. Keep in mind this high-quality product is made of durable metal and is sold as an individual item.

This item is available as an individual replacement part and is made of rubber. The choke rod grommet goes next to the choke control rod. If this item becomes broken it will need to be replaced and may require a set of pliers and a socket set during the installation. It is an OEM Honda part directly sourced from the manufacturer for use in small engines.

This gasket-oil filler cap is an original Honda replacement part. This item is constructed of flexible plastic, and is compatible with over 150 small engines. The gasket is most often used as a seal for the cap assembly. This part is sold individually. A screwdriver and a wrench may be needed in making the replacement.