GX270 (Type VWA2A) Honda Engine - Overview

This is an authentic replacement part sourced directly from the manufacturer. The stop switch wire is commonly found in Honda small engines. This part is made of metal wire with a flexible plastic casing, and is used to send signals from the engine stop switch to the engine. You may require a wrench and pliers when replacing this item. This product is available as an individual replacement part.

This item is a genuine OEM sourced part that has been manufactured to be used with small engines from Honda. The gasket is used to seal the connection between the carburetor and the insulator plate. It is recommended to replace gaskets when servicing the carburetor to make sure the part connections are sealed and seated correctly when the...Read more parts are reassembled. This item is available as an individual replacement part.

It is a genuine item that is supplied by the original equipment manufacturer for use with Honda engines that are commonly installed on a variety of lawn and garden equipment. The lever provides a user with a comfortable grip to adjust the choke on the carburetor. When the choke knob is pulled out, the choke plate (on the front of the carb...Read moreuretor throat) is rotated to the choked position. The choke draws additional fuel into the carburetor during a cold start. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. To ensure the correct installation of this lever, refer to the diagrams of your model. One durable plastic part is included.

This is an authentic replacement part manufactured for use with Honda small engines. The muffler is used to reduce noise and emissions, but over time can become clogged and will need to be replaced. This repair is fairly simple and can be completed with relatively few tools. The muffler is sold as an individual replacement part, please not it is recommended to replace the gaskets when replacing the muffler.

It is made of metal and is priced individually. The starter return spring connects to the recoil starter pulley. A set of pliers, a socket set, and a wrench set might be required during the replacement of this part. It will need to be replaced if it breaks. This authentic item is supplied by the original equipment manufacturer for use with Honda small engines.

This is an authentic Honda replacement part, sourced from the original manufacturer for use with small engines. The pulley is used to house the starter spring and to wind up the recoil starter rope. This pulley is sold as an individual replacement part, please note the rope and spring are available separately.

This is an authentic manufacturer sourced replacement part. It is commonly used on Honda engines. This item consists of pleated paper filter in a metal frame and a foam pre-filter. Its purpose is to filter out dust and debris from contaminating the engine. Over time it will get clogged no longer allowing for the air flow. This would reduc...Read moree engines power and eventually it will no longer be able to run. It is recommended to replace air filter at least once a season to ensure top performance. Replacing this filter element is a simple task that does not require any tools. • Remove the wing nut that hold the cover • Remove the air cleaner cover • Remove old filter and secure the new one • Reassemble and test the unit

This is an OEM replacement screw made for Honda small engines. This part is generally used to secure the muffler parts. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. To secure or loosen this item you would need a screwdriver.