GX240 (Type SHB) Honda Engine - Overview

This authentic OEM drain plug washer in your outdoor equipment, with a 12mm diameter, provides a tight seal between the drain plug and the engine to prevent leaks during oil changes. A broken washer will show signs such as oil leakage, visible cracks, or deformations. If left unreplaced, a faulty washer can cause internal damage, loss of ...Read moreoil, and expensive repairs. To replace a damaged washer, you need to first turn off your machine and make sure that its cooled down. Place a drain pan underneath the plug to catch any draining oil. Using a socket wrench, turn the drain plug counterclockwise to loosen it until you can remove it. Please remember that this washer is sold individually.

This is a gasket set for various models of small engines. This set of gaskets and O-rings is located within the carburetor assembly for various small engines, and is used to create airtight seals for the carburetor to function properly. This set includes one rubber bowl gasket, four rubber O-rings, and one petcock valve gasket, all from t...Read morehe original equipment manufacturer. These gaskets can wear down over time due to high pressure and temperature exposure, as well as exposure to oil and gas. If you notice poor performance coming from your motor or any leaks near the carburetor, it would be worth inspecting and potentially replacing the gaskets to any other parts being damaged as well. To replace this gasket set, you will first need to disconnect the spark plug, and then the fuel line of the engine. Locate the carburetor and use a wrench to loosen and remove the carburetor bowl. Once the bowl is removed, carefully remove each gasket and O-ring that is worn out and clean the carburetor with carburetor or brake cleaner. Install the new O-rings, and ensure the new gaskets have gasket sealant to prevent leaks. Reinstall the carburetor bowl and secure it with its screw. Install the fuel line and the spark plug, and check the engine for any leaks.

This genuine OEM sourced replacement carburetor assembly is specially designed for use with Honda engines commonly installed on lawn and garden equipment. The purpose of a carburetor is to mix the air and the gas before the combustible mix goes to the engine. If the engine won\\\'t start and the tank is full of fresh fuel, or if the engin...Read moree starts and then quickly dies, the carburetor is likely the problem. When replacing carburetor it is advised that you also replace carburetor gaskets to ensure the proper air-tight seal for optimum performance. Please note this high-quality metal body carburetor is sold individually.

This is an authentic replacement part sourced directly from the manufacturer. The stop switch wire is commonly found in Honda small engines. This part is made of metal wire with a flexible plastic casing, and is used to send signals from the engine stop switch to the engine. You may require a wrench and pliers when replacing this item. This product is available as an individual replacement part.

The 6x8 flange bolt has a lot of applications on various equipment, but is generally designed to secure and lock parts in place. Common on lawn and garden equipment and engines, this flange bolt is silver in color, made of metal, and can become broken over time due to wear and tear. You will need a wrench or socket and torque wrench whe...Read moren making this repair, which is generally easy, but a lot depends on the location and nature of the part it attaches to.

It is an authentic OEM sourced replacement filter which is specially produced for use with Honda engines commonly installed on lawn and garden equipment. The purpose of this component is to ensure that the fuel supplied to the unit is free of dust and other harmful components, over time it may get clogged eventually requiring a replacemen...Read moret. It is a durable part which is made of high-quality plastic material and it is sold individually.

This replacement head cover gasket is specially designed for use on small Honda engines. It is used to provide an air tight seal for the head cover. Over time gaskets will tend to deteriorate, becoming brittle allowing for leaks. At this point it should be replaced. It is made out of a rubber material and it is sold individually. Replac...Read moreing this gasket is a quick and easy job. You would need a wrench to complete this repair. • Remove the head cover bolt • Separate head cover and the old gasket • Secure new gasket in place • Reattach the head cover

It is a genuine item that is supplied by the original equipment manufacturer for use with Honda engines that are commonly installed on a variety of lawn and garden equipment. The lever provides a user with a comfortable grip to adjust the choke on the carburetor. When the choke knob is pulled out, the choke plate (on the front of the carb...Read moreuretor throat) is rotated to the choked position. The choke draws additional fuel into the carburetor during a cold start. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. To ensure the correct installation of this lever, refer to the diagrams of your model. One durable plastic part is included.

This is an original replacement part manufactured for use with Honda small engines. This gasket provides a seal between the air cleaner elbow, and the muffler nose, which holds the air cleaners. Gaskets can wear out over time, and it is recommended to replace worn gaskets to maintain good seals. The elbow gasket is sold individually.