GX240 (Type LKS) Honda Engine - Overview

This authentic OEM drain plug washer in your outdoor equipment, with a 12mm diameter, provides a tight seal between the drain plug and the engine to prevent leaks during oil changes. A broken washer will show signs such as oil leakage, visible cracks, or deformations. If left unreplaced, a faulty washer can cause internal damage, loss of ...Read moreoil, and expensive repairs. To replace a damaged washer, you need to first turn off your machine and make sure that its cooled down. Place a drain pan underneath the plug to catch any draining oil. Using a socket wrench, turn the drain plug counterclockwise to loosen it until you can remove it. Please remember that this washer is sold individually.

This genuine OEM sourced replacement carburetor assembly is specially designed for use with Honda engines commonly installed on lawn and garden equipment. The purpose of a carburetor is to mix the air and the gas before the combustible mix goes to the engine. If the engine won\\\'t start and the tank is full of fresh fuel, or if the engin...Read moree starts and then quickly dies, the carburetor is likely the problem. When replacing carburetor it is advised that you also replace carburetor gaskets to ensure the proper air-tight seal for optimum performance. Please note this high-quality metal body carburetor is sold individually.

This is an authentic replacement part sourced directly from the manufacturer. The stop switch wire is commonly found in Honda small engines. This part is made of metal wire with a flexible plastic casing, and is used to send signals from the engine stop switch to the engine. You may require a wrench and pliers when replacing this item. This product is available as an individual replacement part.

It is a genuine item that is supplied by the original equipment manufacturer for use with Honda engines that are commonly installed on a variety of lawn and garden equipment. The lever provides a user with a comfortable grip to adjust the choke on the carburetor. When the choke knob is pulled out, the choke plate (on the front of the carb...Read moreuretor throat) is rotated to the choked position. The choke draws additional fuel into the carburetor during a cold start. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. To ensure the correct installation of this lever, refer to the diagrams of your model. One durable plastic part is included.