GT1927PVCW International Refrigerator - Instructions

I removed the old one and replaced with the new one. The right side one was quite easy whereas the left one took a longer time.

I opened the box, unwrapped the new ice pan, gave it a cursory rinse, and put it in the freezer.

I took off the old retainer bar and snapped the new one in place. Easy.

This was a simple "clip-on" job. With functioning plasctic hooks, the retaining bar clipped right on the door.

Great service. Unpluged old switch and pluged in new one. Works great

I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights we ... Read more re staying on (50 watts of heating). Replaced the switch and the frig started working like new.

Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.

Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.

Good news/Bad news story. One of your parts view showed the side rails without the drawer rollers another showed the rails with rollers. I ordered the rails expecting that they would come with the rollers attached. They did not so I had to place a second order for two rollers and two screws. As I live in CA, delivery was just a day for f ... Read more irst order, but for second I ordered on Sat, delivery was on Tuesday. My complaint was double shipping and handling so total was almost $50.for two very simple items.

snaped in new one

inserted bottom brackets, then top ones just slid in; customer service was very helpful is determining correct part to order.

Took both left(broken one) and right brackets off. They come out opposite what you may think. You must pull down on them and then out. Previous post alerted me to pull down, and he was right. Pliers helped give me leverage.

I put the shelves into bracket on both sides before inserting them back into position. Popped right ... Read more in with a firm push.

All's well that ends well.

Took out lower shelf. Unscrewed screws holding two broken shelf supports and removed broken supports. Replaced with new supports and screwed in the screws. Nothing to it.

After disconnecting the electricity. I followed the instructions as indicated in the "HOW TO" article on the website. I used a steel putty knife and pried the light switch out of its retaining hole. I worked the right side the most since this is the side with the retaining clip. After I removed the switch I transferred the two electrical ... Read more outlets to the new switch and easily snapped it into place. Engaged the electric power and tested the switch.

removed the 2 screws that held the panel in place, had to reach up and push on locking tabs to lower trhe front of the panel. was able to then push on the locking tab of the switch to release it. removed the wires, replaced them onto the new switch, and snapped the switch into place. the rest was reverse of the uninstall process.