EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GSH25JSDBSS General Electric Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
BUCKET AUGER – Part Number: WR29X43990
$85.87
In Stock
BUCKET AUGER
★★★★★
★★★★★
(234)
Part #WR29X43990
The ice bucket auger is located within the ice bucket assembly in your freezer. It stirs and dispenses the ice in the bucket. You may need to replace the auger if your ice maker is noisy, or not dispensing ice. Disassembly of the ice bucket assembly is necessary to replace this part. Turn off power to the appliance before removing the ice bucket assembly to do this repair.
Temperature Sensor – Part Number: WR55X10025
$30.53
In Stock
Temperature Sensor
★★★★★
★★★★★
(69)
Part #WR55X10025
This temperature sensor, also called a thermistor, measures temperature inside the refrigerator or freezer and sends readings to the main control board. The board uses this information to control cooling, including compressor and fan operation. Incorrect readings may cause the compartment to become too warm or too cold, or make cooling run longer than needed. The replacement includes the sensor body and wire leads. Its location varies by appliance. This is an OEM part sourced directly from the manufacturer.
WATER VALVE WITH GUARD – Part Number: WR57X33326
$84.51
In Stock
WATER VALVE WITH GUARD
★★★★★
★★★★★
(87)
Part #WR57X33326
If your refrigerator is leaking, the dispenser is not dispensing, or the ice maker is not making or dispensing ice, the inlet valve may be involved. It controls water flow to the refrigerators water system and includes a guard. Check water pressure first; if it is sufficient, test valve continuity with a multimeter. Disconnect power before testing or replacing the valve. The inlet uses a 1/4-inch compression fitting, with 1/4-inch and 5/16-inch John Guest outlets. Confirm fit for your refrigerator.
Ice Maker – Part Number: WR30X10093
$207.55
In Stock
Ice Maker
★★★★★
★★★★★
(98)
Part #WR30X10093
This refrigerator ice maker assembly automatically freezes water and releases crescent-shaped ice cubes into the storage bin. It replaces an existing ice maker that has stopped cycling, fails to release ice, or has damaged components. Poor ice production can also result from a restricted water supply or incorrect freezer temperature, so check these conditions before replacing the assembly. Confirm the mounting arrangement, fill cup position, electrical connections, and included adapters against the appliance parts list to ensure the kit matches the original installation. This is an OEM part sourced directly from the manufacturer.
Dispenser Door Assembly or Flapper – Part Number: WR17X11653
$33.60
In Stock
Dispenser Door Assembly or Flapper
★★★★★
★★★★★
(93)
Part #WR17X11653
Warm, moist air stays out of the ice chute when this refrigerator dispenser door flapper closes against the opening. The flap opens during ice dispensing, allowing cubes to pass through, then returns to form a seal when dispensing ends. A cracked, warped, or damaged sealing edge may leave gaps that contribute to frost, condensation, or dripping around the chute. Replacing a damaged flapper helps restore proper closure and reduces air leakage between the freezer and room while the dispenser is idle. This is an OEM part sourced directly from the manufacturer.
Dispenser Door Solenoid Assembly – Part Number: WR62X10055
$56.33
In Stock
Dispenser Door Solenoid Assembly
★★★★★
★★★★★
(36)
Part #WR62X10055
This ice dispenser solenoid moves the linkage that opens the ice chute door when dispensing is activated. When power is released, the mechanism allows the flap to close and limit warm air entering the freezer. A failed or sticking solenoid may prevent ice from dispensing or leave the chute door open, contributing to frost or moisture buildup. Inspect the solenoid, spring, and door linkage before replacement, since other mechanism faults can cause similar symptoms. Disconnect power before accessing the dispenser assembly and follow the appliance instructions for mounting and wiring. This is an OEM part sourced directly from the manufacturer.
Bearing Slide – Part Number: WR1X2048
$18.22
In Stock
Bearing Slide
★★★★★
★★★★★
(3)
Part #WR1X2048
Sold individually.
Defrost Heater and Bracket Assembly – Part Number: WR51X10055
$92.28
In Stock
Defrost Heater and Bracket Assembly
★★★★★
★★★★★
(41)
Part #WR51X10055
This defrost heater and bracket assembly melts frost from the evaporator coils during the automatic defrost cycle. Clearing the frost allows air to move across the cooling surface and through the refrigerator compartments. A failed heater may allow ice to build up, restricting airflow and leaving the fresh food or freezer section too warm. The appliance may also run longer without reaching the set temperature. Confirm the heater fault before replacement, since the thermostat and defrost control can cause similar symptoms. Disconnect power before accessing the assembly. This is an OEM part sourced directly from the manufacturer.
DOOR DAIRY – Part Number: WR71X38317
$42.47
In Stock
DOOR DAIRY
★★★★★
★★★★★
(77)
Part #WR71X38317
This is the replacement dairy door for a refrigerator. It is installed on the inner door and rotates up and down to allow access to the dairy compartment. It is made of clear plastic. If your dairy door is cracked, broken, missing, or won't stay on, you may need to replace it. This is an OEM part sourced directly from the manufacturer.
Vegetable Drawer - Clear – Part Number: WR32X10834
$102.16
In Stock
Vegetable Drawer - Clear
★★★★★
★★★★★
(71)
Part #WR32X10834
Sold individually. This is used in refrigerator to store vegetable and fruits at an optimal temperature
Recess Door Spring – Part Number: WR02X10585
$16.10
In Stock
Recess Door Spring
★★★★★
★★★★★
(12)
Part #WR02X10585
This recess door spring returns the ice chute door or dispenser lever to its resting position after use. It sits inside the water and ice dispenser assembly, behind the control panel. A broken spring or loss of tension may leave the chute door open or cause the lever to hang loose instead of returning normally. An open chute can let warm, moist air enter the freezer and contribute to frost around the dispenser opening. Check the spring and surrounding mechanism when these symptoms occur. This is an OEM part sourced directly from the manufacturer.
Union Connector - 5/16 Inch to 5/16 Inch – Part Number: WR02X11330
$15.00
In Stock
Union Connector - 5/16 Inch to 5/16 Inch
★★★★★
★★★★★
(11)
Part #WR02X11330
A refrigerator water system uses this straight quick union connector to join two plastic water lines. Both ends connect to 5/16-inch lines. This is an OEM part, so check that it matches your refrigerators model before ordering.

Manuals & Care Guides for GSH25JSDBSS

Click to download

Questions And Answers for GSH25JSDBSS

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leo - For model number GSH25JSDBSS
January 11, 2023
Lower light shade
Chris Boyle Profile
Hi Leo, thank you for reaching out. The part you are looking for is part number PS291924. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
No Longer Available
SHIELD LIGHT FZ
3 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Rodney - For model number GSH25JSDBSS
March 26, 2025
The freezer/refrigerator isn't working not getting cold, the lights inside the refrigerator and Freezer come on
Chris Boyle Profile
Hi Rodney, thank you for reaching out. We would suggest checking the temperature sensor first. If it is fine, the issue could be with the evaporator fan motor, part number PS1019114. You may need to replace it to fix the issue. We hope this solves your problem!
$83.64
In Stock
Evaporator Fan Motor
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Michael - For model number GSH25JSDBSS
September 22, 2023
how to replace door rt. side door switch
Chris Boyle Profile
Hi Michael, thank you for your inquiry. We have included a video that you may reference on how to replace the door switch. The refrigerator in the video may appear different from yours, but it will give you a general idea of how to replace the door switch. We hope this helps with the repair.
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
John - For model number GSH25JSDBSS
October 11, 2023
My fridge is not getting cold in the fresh food section and the freezer, what needs to be replaced
Chris Boyle Profile
Hi John, thank you for reaching out. We would recommend checking the evaporator fan motor, part number PS1019114. You may need to replace it to fix the issue. We hope this will resolve your problem!
$83.64
In Stock
Evaporator Fan Motor
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Sharon - For model number GSH25JSDBSS
February 9, 2023
The ice lever that turns ice maker off when tray is full does not work. No spring to move it back and forth. What is it called?
Chris Boyle Profile
Hi Sharon, Thank you for your question. The part you are referring to is sometimes referred to as the lever or arm. If it is not working, you will need to replace the ice maker. The part number listed under your model number for the ice maker is PS1993870. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
$207.55
In Stock
Ice Maker
Was this helpful?
Thank you for voting!
  • 1
  • 2

Common Symptoms of the GSH25JSDBSS

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigertor water dispenser not working BUT ice machine is working
1038 of 1163 people found this instruction helpful.
  • ralph from bristow, VA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers, Socket set
The very first symptom here is important! The door water dispenser is not working but the ice macine is working. You may only have a frozen water tube in the door so do the following before diagnosing that your solenoid valve is bad: 1) the tube usually runs under the front of the refrigerator and usually has a quick disconnect. Undo t he connection and press the dispenser. If water comes out of the tube you have a frozen or blocked tube in the door. 2) Immediately adjust the temperature in the freezer and warm the freezer compartment as much as you can without destroying the freezer contents. Wait 24 hours. This will usually unfreeze the line. Do not waste your time with a hair dryer. NOW, if this doesn't work and you are convinced you need to order and replace the solenoid, follow these steps. Assemble your tools first. I needed a good ratchet set and a screwdriver. A shop towel is helpful for spilled water. A light is handy. Pull out the refreigerator to gain access to the rear of the unit. Unplug the power and close the water valve (older homes, you may need to actually shut the house water supply). Remove the screws which hold the cover over the lower half of the refrigerator. On the left you will see the solenoid. It's always good to see that your new part matches the one you feel needs replaced. They may not match perfectly due to changing design but they should be very similar. One screw holds this part in place and access is very simple. Now simply unplug the electrical connections. In my case, one blue "blade" type connection (powering the water) and one red "blade" type connection powering the ice maker. They are not the same size and this coupled with the coloring means you will not accidently switch them. pull the tubes clear of the solenoid. This is simple and needs no explantion. Grab your new solenoid and reattach both the electrical and water lines (two, remember, ice maker and drink dispencer). Replace the single screw. Re-attach the rear, lower refrigerator cover and go to the front of the unit to check the water. You can listen carefully and hear the power engage from the new part bringing you water. Clean up, replace the refrigerator back to its place and look really tired when your wife sees that you worked "so hard"! You probably saved at least $50-$80 from a service call which can now be used to take the family to dinner after your "exhausting" 15 minute workout of removing about 10 screws and wheeling the unit in and out of place. Writing this article took longer! My 4 year old worked harder holding the flash light!
Was this helpful?
Thank you for voting!
Plastic Auger blades broke in ice tray
586 of 630 people found this instruction helpful.
  • Tim from Newport News, VA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
I used a digital camera and photographed the assembled unit and the metal blades before I started the repair. Then, I removed the top screw on the clear shield. Flip over ice tray and removed two Phillips screws on bottom. Exterior plastic white cover comes off next. The cover sides have hard push-in white plastic tabs. Push them in; pry up top cover with small flathead screwdriver. Slide white top cover up and you will now see the metal blades and assembly. Auger is held in place with a metal c-clip and washer on the end. Use flat head screwdriver to pry off c-clip. Then you will see a nylon round slotted nut. The threads are reverse, use pliers and loosen nut. It is not that tight but pliers are needed. Then it all is loose and ready for removal. I slid all the blades off at one time and kept them stacked together. Slide out auger and clear flat shield cover. Install new auger, clear shield, and metal blade stack. When you put it all back together take a look at the long metal J-hook on the bottom make sure it is in the slot before you make everything tight. Failing to do this will prevent cubed ice from dispensing.
It is not that hard to do the repair it just takes some patience and paying attention to details.
Was this helpful?
Thank you for voting!
Fridge too warm, evaporator icing up
606 of 738 people found this instruction helpful.
  • Gerald from San Clemente, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
After replacing the defrost heater, main board and thermistor I still had the same problem. Called a repair guy and he (with the help of GE on the phone) diagnosed that the temperature sensor was bad. So I ordered from partselect and installed it and it fixed the problem. Been good for a couple months (knocking on wood). To install I had to cut the 2 wires to the old sensor, crimp the 2 new wires on and snap the new sensor to the clip on the evaporator. Very easy. Make sure you seal the ends of the wire crimps so moisture doesn't get in and corrode the connection.
Was this helpful?
Thank you for voting!