GSD1200V-01 Hotpoint Dishwasher - Overview

Diagrams for GSD1200V-01

See every part. Know exactly what you need.

Parts for the GSD1200V-01

$79.80

Silverware Basket (Grey)

★★★★★

(34)

Part #WD28X265

The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn out or broken, you should replace it with this part. No tools are required as it is an easy replacement. If you need further guidance refer to the instructions p...Read more

Read less

$198.71

Motor and Pump Kit

★★★★★

(12)

Part #WD26X10013

This is a pump and motor kit for your dishwasher. This assembly replaces many old-style pump and motor kits that were manufactured since 1970. The instructions are included with this kit in to assist you. Take note that this is a completely redesigned kit by the manufacturer and now includes the drain solenoid. You may need to replace thi...Read more

Read less

$98.63

Door Gasket

★★★★★

(7)

Part #WD8X229

This dishwasher door gasket is compatible with those models having a two ear housing and a square spacer. It's gray and it creates a water tight seal around your dishwasher's door.

Impeller and Seal Kit

★★★★★

(5)

Part #WD19X10032

The impeller and seal kit is used in a dishwasher. The kit includes all the parts needed to do this repair, including the impeller, seal, blade, filter, skidder and skidder holder. If your washer is leaking, not cleaning dishes properly, or not draining, then replacing some parts in the pump can help solve the issues mentioned. The tools ...Read more

Read less

$36.85

Finish Dishwasher Cleaner

Part #WX10X10209

This dishwasher cleaner cleans, freshens, and helps maintain your dishwasher. It hygienically cleans hidden grease and lime scale from filters, spray-arms and pipes. It is safe for septic systems and contains no phosphorus.

$20.37

Float Switch

Part #WD21X479

Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.

SPRAY ARM

Part #Y03000107

$56.33

SWITCH

Part #WD6X222

$84.91

SOLENOID KIT

Part #WD21X374

DISCONTINUED

Part #WD21X528

DISCONTINUED

Part #WD13X65

Common Symptoms of the GSD1200V-01

How this model fails, and the parts that fix it.

Leaking

Fixed by
these parts

Not cleaning dishes properly

Will not fill with water

Fixed by
these parts

Show All

Videos related to models starting with GSD1200V-01

Watch our pros, then fix it yourself.

Replacing the Motor and Pump Kit

Replacing the Float Switch

Replacing the Silverware Basket (Grey)

Replacing the Impeller and Seal Kit

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Basket was lost

49 of 52 people found this instruction helpful.

Joseph from Elmendorf, TX
Really Easy
Less than 15 mins

Opened package from Parts Select.
Removed Silverware basket from package.
Opened Dishwasher.
Inserted Silverware Basket in rack.
Closed Dishwasher.
Discarded shipping package.
Told wife I fixed Dishwasher.
Sat down & had a beer.

Was this helpful?

Motor was getting noisier every time we used the dishwasher. We knew it was just a matter of time before it totally quit.

48 of 53 people found this instruction helpful.

Glenn from Clemmons, NC
Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers

The most difficult part was removing the dishwasher from below the counter. Once that was complete, I simply turned the washer onto it's front surface to access the pump easier. Simply disconnected the electrical connectors, loosened the three hose clamps holding the hoses to the pump. Lastly removed a stiff arm bracket holding the pum ... Read more

Read less

Was this helpful?

dishwasher pump valve leaking at shaft

40 of 47 people found this instruction helpful.

richard from las vegas, NV
Easy
1- 2 hours
Screw drivers, Socket set, Wrench (Adjustable)

took dishwasher out- put on table to work on-removed wire brace- disconected drain outlet- disconnected top drive seal- removed wire clip connector- removed motor unit----------------
installed new motor/drain unit--used new longer wire brac used adapter to connect electical leads-
tightened clamps and bingo it worked and didnt' ... Read more

Read less

Was this helpful?