EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GRSL3640TM-2 General Electric Range - Overview

Diagrams for GRSL3640TM-2

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Handle End Cap – Part Number: WB07K10043
$56.38
In Stock
Door Handle End Cap
★★★★★
★★★★★
(6)
Part #WB07K10043
This white end cap is sold individually. One cap is required for each end of the oven door handle.
Burner Bowl - 8 Inch – Part Number: WB31T10013
$37.91
In Stock
Burner Bowl - 8 Inch
★★★★★
★★★★★
(6)
Part #WB31T10013
This burner bowl or drip pan is found beneath the heating element on your cooktop or range. This part measures 8 inches in diameter, and should not be confused with the smaller pan, which measures 6 inches in diameter. The burner bowl collects spills that may build up when cooking on your range. If your old 8-inch burner bowl is cracked, broken, or missing, this is the part that can replace it.
Drip Bowl - 6 Inch – Part Number: WB31T10012
$38.96
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(2)
Part #WB31T10012
This gray drip bowl is sold individually.
Light Cover – Part Number: WB36X192
$26.39
In Stock
Light Cover
★★★★★
★★★★★
(10)
Part #WB36X192
This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existing light bulb lens. Disconnect power to your appliance before this repair. It is recommended to check the light bulb while the lens cover is removed in case it needs to be replaced. Be sure to remove all broken glass, if applicable, before installing new lens. This part is sourced directly from the genuine manufacturer, and is sold individually.
Bottom Trim - White – Part Number: WB07K10250
$31.86
In Stock
Bottom Trim - White
★★★★★
★★★★★
(14)
Part #WB07K10250
Screws not included.
Door Handle – Part Number: WB15X10018
$48.35
Special Order
Door Handle
Part #WB15X10018
This is just the handle. The end caps for this handle must be ordered separately if needed.
Screws - Package of 12 – Part Number: WB1X500D
$13.92
Special Order
Screws - Package of 12
Part #WB1X500D
These are replacement screws designed to fit your range. They are made of metal and are approximately ¼ inch long. They come in a package of 12. These are OEM parts sourced directly from the manufacturer.
Washer - 12 Pack – Part Number: WB1X119D
$24.09
On Order
Washer - 12 Pack
Part #WB1X119D
Inner Door Glass – Part Number: WB36X5712
No Longer Available
Inner Door Glass
★★★★★
★★★★★
(3)
Part #WB36X5712
This inner door glass is sold individually.
Leveling Leg – Part Number: WB2X8248
No Longer Available
Leveling Leg
Part #WB2X8248
End Cap - White - Right Side – Part Number: WB7X7187
No Longer Available

Common Symptoms of the GRSL3640TM-2

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Door Bracket Broke
14 of 23 people found this instruction helpful.
  • Scott from Columbia, MD
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
After several temporary fixes, one of the end caps finally broke completely, so the handle fell off. Ordered both caps, they arrived remarkably fast, and were installed easily.
Was this helpful?
Thank you for voting!
broken inner glass
4 of 4 people found this instruction helpful.
  • Sharon from EDISON, NJ
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers, Wrench (Adjustable)
I removed the oven door by unlocking the hinges and pulling out. Set on workbench (with towel/pad) and removed handle, four screws, then bottom and inside panel screws, then one nut to finally be able to get at the inner glass insert. Removed insulation and then took an extra hour to really clean all surfaces (middle glass was quite gre asy due to inner glass being broken for a while. Reassembly wasn't bad, but took a while to figure out that the two thin 2" red spacers belonged around the two handle screws. This was tough to figure out as they come off when taking the handle off, but you can't see them, so didn't know where they came from! Anyway, if you're just a bit handy, you can do this job.
Was this helpful?
Thank you for voting!
replaced door handle and end caps
4 of 5 people found this instruction helpful.
  • Thomas from COXS CREEK, KY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
the first end cap broke when I tried to tighten the screws, the end cap holes were too small, Thirty some dollars down the drain. Drilled out the second end cap before I tighten the screws, worked fine. Make sure you drill out the holes of the end caps or they will split out and you lose your money. There are no warnings about this proble m.
Was this helpful?
Thank you for voting!