EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GRS24WNCD2 Gibson Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Shelf End Cap - Left or Right Side – Part Number: 215267701
$10.11
In Stock
Door Shelf End Cap - Left or Right Side
★★★★★
★★★★★
(12)
Part #215267701
This white door shelf end cap supports the retainer bar inside a refrigerator or freezer door. It fits either the left or right end of the specified shelf rail and helps keep bottles and containers in place when the door moves. Cracks, broken tabs, or a damaged mounting area may let the bar come loose. Inspect the cap, rail, and door attachment points before replacement. Secure the new support in its mounting track, then check that the retainer bar is firmly seated before returning items to the shelf. This is an OEM part sourced directly from the manufacturer.
Defrost Timer - 60Hz 120V – Part Number: 215846602
$40.84
In Stock
Defrost Timer - 60Hz 120V
★★★★★
★★★★★
(44)
Part #215846602
This 120 volt, 60 hertz defrost timer switches the refrigerator into a 30 minute defrost cycle after eight hours of compressor run time. The cycle allows the heater to clear frost from the evaporator so air can circulate. A faulty timer may allow frost buildup that restricts airflow and leaves the refrigerator or freezer too warm. It may also fail to return the appliance to cooling. Confirm the timer fault before replacement, since other defrost components can cause similar symptoms. Disconnect power before accessing the control. This is an OEM part sourced directly from the manufacturer.
Refrigerator Ice Maker Assembly – Part Number: 241798231
$87.51
In Stock
Refrigerator Ice Maker Assembly
★★★★★
★★★★★
(99)
Part #241798231
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.
Lower Crisper Drawer – Part Number: 5303289501
$116.12
In Stock
Lower Crisper Drawer
★★★★★
★★★★★
(12)
Part #5303289501
This lower drawer does NOT come with the front cover.
Upper Crisper Drawer - Front NOT Included – Part Number: 5303289500
$123.09
In Stock
Upper Crisper Drawer - Front NOT Included
★★★★★
★★★★★
(7)
Part #5303289500
Front must be ordered separately.
Light Bulb – Part Number: 316538904
$21.95
In Stock
Light Bulb
★★★★★
★★★★★
(13)
Part #316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If the existing bulb is broken in the socket, disconnect the power to the refrigerator and use a pair of needle nose pliers to grip the internal fragments of the bulb to unscrew. Replace with the new bulb and reconnect the power to the refrigerator. These bulbs are sold individually and are a commonly replaced part; consider ordering a spare.
Door Shelf Retainer Bar - Cut to Fit – Part Number: 215366002
$57.15
In Stock
Door Shelf Retainer Bar - Cut to Fit
★★★★★
★★★★★
(2)
Part #215366002
This white door shelf retainer bar keeps bottles, jars, and condiments on the shelf when the refrigerator or freezer door moves. It is supplied at approximately 30.75 inches long and 1.75 inches wide and can be cut to the required length. A bent, broken, or loose bar may leave stored items without proper restraint. Inspect the end supports as well before replacement, since damaged caps can prevent the bar from staying secure. Confirm the finished length and mounting arrangement before trimming and fitting the replacement rail. This is an OEM part sourced directly from the manufacturer.
Run Capacitor – Part Number: 5304464438
$56.05
In Stock
Run Capacitor
★★★★★
★★★★★
(10)
Part #5304464438
Steady compressor operation relies on the electrical support provided by this refrigerator run capacitor. It creates a phase shift in the motor circuit to help the compressor run as designed while circulating refrigerant through the cooling system. A failed capacitor may contribute to unusual humming, difficulty starting, or reduced cooling performance. Replacing a faulty capacitor helps restore proper electrical conditions for compressor operation. The component stores electrical energy and can retain a charge after power is disconnected, requiring care during handling and replacement. This is an OEM part sourced directly from the manufacturer.
Replacement Ice Maker – Part Number: 5303918277
$99.95
In Stock
Replacement Ice Maker
★★★★★
★★★★★
(36)
Part #5303918277
Fresh ice is produced automatically by this refrigerator ice maker assembly, which fills its mold, freezes water, and releases cubes into the storage bin. Its heat release mechanism briefly warms the mold to loosen the ice during harvesting. A damaged or failed assembly may stop cycling, leave cubes stuck in the mold, or leak into the bucket. Replacing a faulty unit helps restore automatic ice production. The assembly includes a wiring harness and adapter plug to support the electrical connections used by the replacement kit. This is an OEM part sourced directly from the manufacturer.
Defrost Thermostat – Part Number: 5303917954
$41.75
In Stock
Defrost Thermostat
★★★★★
★★★★★
(7)
Part #5303917954
Clipped to the evaporator tubing, this refrigerator defrost thermostat helps limit heater operation during the automatic defrost cycle. It allows the heater circuit to operate when the coils are cold and opens the circuit once they reach the cutoff temperature, helping prevent overheating. A faulty thermostat may interrupt defrost heating, allowing frost to accumulate and block airflow. This can contribute to warmer food compartments or longer running times. This is an OEM part sourced directly from the manufacturer.
Door Shelf End Cap - Right Side – Part Number: 3206165
$14.89
In Stock
Door Shelf End Cap - Right Side
Part #3206165
This is the door shelf end cap for your refrigerator. It connects to the refrigerator door and keeps the door bar in place. Your refrigerator will have two shelf end caps, one for the right side and one for the left. This part is the right side door shelf end cap. It is made of white plastic and is a little over one inch long. This is an OEM part from the manufacturer and is sold individually.
Door Shelf End Cap - Left Side – Part Number: 3206166
$20.85
In Stock
Door Shelf End Cap - Left Side
★★★★★
★★★★★
(3)
Part #3206166
This is the door shelf end cap for your refrigerator. It connects to the refrigerator door and keeps the door bar in place. Your refrigerator will have two shelf end caps, one for the right side and one for the left. This part is the left side door shelf end cap. It is made of white plastic and is a little over one inch long. This is an OEM part from the manufacturer and is sold individually.

Common Symptoms of the GRS24WNCD2

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fridge got warm and freezer coils were frosted
340 of 407 people found this instruction helpful.
  • Stephen from Warrington, PA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Fridge is a side by side. The freezer is pretty narrow for a guy with wide shoulders.

Pulled plug.

Had to remove bottom drawers then used nut driver to remove screws closest to back wall in drawer runners. Once the back screws were removed the runners could be swung up or down out of way so back cover could be re moved.

Once back cover was removed thermostat was located attached to top pipe going into coil using a spring clamp.

Cut the wires just outside the crimp connectors going into thermostat. Released the spring clamp buy squeezing botton together.

Removed old badly corroded thermostat.

I wish I had attached the crimp connectors to the new thermostat wires before mounting it. Reaching way in the back, while turning shoulders verticly and trying to get the wire connectors set from both sides was awkward and uncomfortable...The biggest PIA of the whole task.

Once connected I let the fridge (thermostat) cool for 10 min. Turned the dial defrost timer to get it into defrost mode. Stupidly touched the heating element to see if it was getting warm...it was very hot.

Coils steamed...every looked like it was working. Unplugged, put back cover back on and retattached drawer mounts.

Plugged back in and everying is working great!
Was this helpful?
Thank you for voting!
Broken ice maker
255 of 345 people found this instruction helpful.
  • Juan from Miami, FL
  • Really Easy
  • 15 - 30 mins
  • Socket set
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice.
Was this helpful?
Thank you for voting!
Ice Maker Stopped Working
164 of 183 people found this instruction helpful.
  • JACK from MESA, AZ
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
It was pretty straight forward. Remove the two screws that hold the unit to the wall of the freezer. In my case, I had to use a different ice maker than what came with the frig. In order to install the replacement unit they sent a wire adaptor so it would attach to the existing wiring. That too was all fine and dandy. The only p roblem was that the end of the wire adaptor did not fit through the existing hole in the rear of the frig. I used a utility knife to cut through the thin metal lining. That worked just fine. However, I could not cut through the insulation because I could not reach it through the small hole. The excess wire was supposed to be pulled through the hole and out through the back of the unit. So now the excess is between the wall of the freezer and the insulation. The unit is working wonderfully. In fact, it is making more ice than I can use. I am very pleased with the replacement unit. This is the 3rd ice maker that has been in this frig. All the others had a design flaw that had a leak in the rear of the unit. This caused all the ice to form into a big block. The replacement unit has not had this problem so far. Thank you for allowing me to explain my situation so that maybe others may benifit from my experience. Thank you. Jack
Was this helpful?
Thank you for voting!