EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GR-L268NTJP LG Refrigerator - Overview

Diagrams for GR-L268NTJP

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water Inlet Valve Assembly – Part Number: AJU72992601
$122.57
Special Order
Water Inlet Valve Assembly
★★★★★
★★★★★
(16)
Part #AJU72992601
This includes the primary and secondary valves along with the wire harness.
Door Holder – Part Number: MEG61899901
$23.60
On Order
Door Holder
★★★★★
★★★★★
(5)
Part #MEG61899901
This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refrigerator door may not open and shut properly, and therefore it should be replaced.
Evaporator Fan Motor – Part Number: 4681JB1027C
$109.40
In Stock
Evaporator Fan Motor
★★★★★
★★★★★
(8)
Part #4681JB1027C
This is a genuine OEM evaporator motor that directly powers the evaporator mechanism within your refrigerator. This mechanism is responsible for pulling air over the evaporator coils, which are cold, and circulating that cold air back throughout the appliance. Without this motor, the interior of your refrigerator would build up frost, strain the compressor, and simply not cool your fridge enough. A warm fridge, frost buildup or unusual noises are all signs that this fan needs replacing, and over time or through excessive dust building up, motor issues will arise and can cause it to fail. This fan motor is sold as an individual part, so it does not come with any securing screws or the fan blade itself. Replacing the evaporator fan motor will require your user manual and Philips-head and flathead screwdrivers. You need to gain access to the evaporator cover, which you will need to locate using your user manual schematics. Once the cover is removed and you disconnect the wire harnesses within it, you can disassemble the fan mechanism on its inside portion. With the fan mechanism disassembled, remove the old mechanism and install the new one, with the securing screws and wire harnesses.
Crisper Shelf Glass – Part Number: MHL42613217
$57.38
In Stock
Refrigerator Water Reservoir – Part Number: AJL72911502
$63.64
In Stock
Refrigerator Water Reservoir
★★★★★
★★★★★
(2)
Part #AJL72911502
The water reservoir holds the water for the water dispenser as the water chills.
Defrost Sensor Assembly – Part Number: 6500JB2001B
$45.29
In Stock
Defrost Sensor Assembly
Part #6500JB2001B
Temperature Sensor – Part Number: 6615JB2005H
$34.74
In Stock
Temperature Sensor
★★★★★
★★★★★
(4)
Part #6615JB2005H
This defrost temperature sensor and thermistor assembly is designed to monitor the temperature of the evaporator coils in your refrigerator, ensuring the defrost cycle activates accurately and efficiently. The thermistor functions as a variable resistor, sending precise temperature readings to the control board to prevent overheating and excessive frost buildup. This assembly includes a fuse and wire harness for easy installation.
Ice Water Tube Assembly – Part Number: AJR56656503
$45.29
In Stock
Water Filter Bypass Plug – Part Number: ABN73019101
$24.67
In Stock
Water Filter Bypass Plug
★★★★★
★★★★★
(2)
Part #ABN73019101
This is a water filter bypass plug made for use with LG refrigerators. This plug is designed to act as a stand-in and allow water to flow to the dispenser or ice maker, even when the water filter is removed. This plug is made of white plastic and measures approximately 7 inches long and 1.2 inches wide. Installing this water filter bypass plug is simple, and only requires that you remove any present water filters, and then stick this plug in its place, and close the filter housing.
Condenser Fan Motor – Part Number: 4681JB1029D
$119.53
On Order
Defrost Sensor Assembly – Part Number: 6615JB2005N
$45.29
In Stock
Defrost Sensor Assembly
Part #6615JB2005N
Sensor Cover Assembly – Part Number: ACQ73244001
$45.29
In Stock

Common Symptoms of the GR-L268NTJP

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replace leaking water inlet valve assembly
42 of 75 people found this instruction helpful.
  • Richard from JACKSONVILLE, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Was this helpful?
Thank you for voting!
Replace Thermistor in back of freezer
18 of 25 people found this instruction helpful.
  • Scott from JUPITER, FL
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers
Turn off power, remove upper and lower drawers (may need to open upper refrigerator doors to remove large freezer bin,) remove drawer supports (upper and lower), remove rear freezer panel (trick is to loosen 4 screws on fan bumpout to get the panel to come free from the freezer side wall), test thermistor with multimeter (should have cont inuity or near zero resistance across 2 orange fuse wires) before cutting zip ties, cut zip ties holding Thermistor in place, remove old Thermistor, install new Thermistor, install new zip ties, replace rear freezer panel, install upper and lower drawer supports, install drawers, turn on power, should be fixed if error code doesn't return after 6 hours.
Was this helpful?
Thank you for voting!
Broken shelf glass
5 of 5 people found this instruction helpful.
  • george from PARAMUS, NJ
  • Very Easy
  • Less than 15 mins
Just popped the new one in. Followed the online instructions.
Was this helpful?
Thank you for voting!