This microwave door switch works with the door latch to control when the appliance can run, a worn switch may cause the microwave to lose power, fail to start, or trip a breaker, it fits select upper and lower switch locations, high voltage may remain inside the microwave after power is removed, use a trained technician for installation, confirm fit with the exact model number.
This adapter is a replacement connection component designed to join or transition between different system elements. It supports proper flow or connection stability and is commonly replaced when cracked, leaking, or damaged.
Food splatter can build up on the waveguide cover and eventually cause burning, discoloration, or arcing. Replace the panel if it is cracked, scorched, soft, or no longer stays in place. Check the cooking cavity for damaged paint or exposed metal before ordering. Match the cover to the full microwave model because shape and mounting style...Read more may vary. Disconnect power before installation, do not remove the outer cabinet, and have a qualified technician inspect the appliance if the waveguide area itself appears damaged.
This lamp provides interior illumination to improve visibility during use and maintenance. Reliable lighting enhances convenience and safety when accessing the appliance. Replacing a burned-out lamp restores clear visibility and everyday usability.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave tripped circuit breaker when turned on
41 of 68 peoplefound this instruction helpful.
Arthur from LUTZ, FL
Easy
15 - 30 mins
Screw drivers
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Was this helpful?
Thank you for voting!
Pressing the start, microwave will start and dies out. Electric is tripping.
11 of 18 peoplefound this instruction helpful.
ARNEL from WAUKEGAN, IL
Easy
15 - 30 mins
Screw drivers
The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel. Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.
When found out the problem, the rest of t
... Read morehe work is easy.