GLGFZ386FCC Frigidaire Range - Overview

Diagrams for GLGFZ386FCC

See every part. Know exactly what you need.

Parts for the GLGFZ386FCC

$33.95

Temperature Sensor

★★★★★

(53)

Part #316490000

This genuine OEM oven probe is also known as an oven temperature sensor or range probe. This part is manufactured for a range, stove, or oven to detect the temperature within the oven cavity. The probe allows the oven to maintain the set temperature by sensing the temperature and sending the information to the ovens motherboard. You may n...Read more

Read less

$21.95

Light Bulb

★★★★★

(13)

Part #316538904

This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If the existing bulb is broken in the socket, disconnect the power to the refrigerator and use a pair of needle nose pliers to grip the intern...Read more

Read less

$56.33

LP Conversion Kit

★★★★★

(9)

Part #GRLP3

This kit is used to convert your appliance to liquid propane. This liquid petroleum gas conversion kit contains seven orifices, each under an inch long.

$59.35

Top Burner Knob

★★★★★

(2)

Part #316220002

Sold Individually. This knob accepts a D-shaped shaft.

$26.37

LENS

★★★★★

(15)

Part #5304524341

The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing light bulb lens. Be sure to remove all broken glass, if applicable, before installing the new lens. It is recommended to check the state of...Read more

Read less

$95.93

GLASS

★★★★★

(14)

Part #5304503232

This tempered glass is supplied by the original manufacturer and measures 20 inches by 13 inches. It is an inner door glass, designed for use in ranges/ovens and has several purposes which include providing heat insulation, acting as protective barrier, and providing an opening to monitor the cooking/heating process. Over time the glass c...Read more

Read less

$84.65

IGNITOR,BAKE

★★★★★

(17)

Part #5304534663

This gas oven bake igniter is designed to initiate the heating process by activating the burner during baking cycles. It functions by heating up until it reaches the ignition point, allowing gas to ignite and maintain consistent oven temperatures. A failing igniter is a common cause of heating issues, including longer preheat times, uneve...Read more

Read less

$18.31

DRAWER GLIDE

★★★★★

(13)

Part #316407402

This rear drawer glide, also known as a storage drawer glide, is used in ranges. This helps hold the front side of the storage drawer and allows the drawer to easily slide in and out of the range. If your glide is damaged or missing, replacing it could solve any difficulty using the drawer. First, remove the storage drawer and locate the ...Read more

Read less

$21.95

GLIDE

★★★★★

(9)

Part #807047102

This front drawer glide supports the bottom storage or broil drawer, allowing it to slide smoothly in and out of the range. Designed to reduce friction and keep the drawer properly aligned, it helps ensure easy and stable operation. Replacing a worn or damaged glide can fix issues such as sticking, tilting, or uneven movement, restoring normal drawer function.

$23.05

Indicator Light Lens

★★★★★

(5)

Part #318228310

This is a red indicator light lens for an oven that covers the indicator light for the surface element. The indicator light signifies when the element is on and heated. This part is sold individually. It is recommended to check other red indicator lights in case they need to be replaced because they often wear at the same rate. It is diff...Read more

Read less

$26.68

Anti-Tip Kit

★★★★★

(4)

Part #316112005

The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tipping when force or weight is applied to an open oven door. The bracket is secured to the floor and wall and fits over the rear leveling leg in ...Read more

Read less

$12.05

Leveling Leg Assembly

★★★★★

(3)

Part #5304509869

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

Manuals & Care Guides for GLGFZ386FCC

Click to download

Install

Installation Instructions

(1.15MB)

Install

Installation Instructions

Questions And Answers for GLGFZ386FCC

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Elvira - For model number GLGFZ386FCC

May 29, 2024

How old is this stove? Tenant claims burners take a while to start.

Hello Elvira, thank you for reaching out. According to our research, your model was approximately manufactured in 2006. For the burners problem, we would recommend cleaning the burners and igniters properly. If the issue persists, you may need to replace the pressure regulator, part number PS16218309. It limits the incoming gas pressure to a safe and constant level for the burners. For us to locate the exact manufacturing date, we will require the serial number of the unit. Once you have located the serial number, please feel free to resubmit the question and we will be happy to help you. We look forward to hearing from you!

$80.25

REGULATOR

Was this helpful?

Common Symptoms of the GLGFZ386FCC

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Oven not heating evenly

Fixed by
these parts

Show All

Gas igniter glows, but will not light

Element will not heat

Touchpad does not respond

Fixed by
these parts

Show All

Door won’t open after self cleaning cycle

Fixed by
these parts

Show All

Videos related to models starting with GLGFZ386FCC

Watch our pros, then fix it yourself.

Replacing the Temperature Sensor

Replacing the Light Bulb

Replacing the GLASS

Replacing the DRAWER GLIDE

Replacing the LENS

Replacing the GLIDE

Replacing the Leveling Leg Assembly

Replacing the Panel

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Oven wouldn't heat - broiler and burners worked fine-Bake Burner Igniter didn't work

190 of 229 people found this instruction helpful.

Debbie from Rockford, MI
Easy
15 - 30 mins
Nutdriver, Screw drivers

It was the week before Thanksgiving and we didn't know what to do without an oven. I did some research on Google and of all the websites out there, I found a decent price here at Parts Select and ordered it on Friday. I was shocked when FEDEX pulled up to the door on Saturday afternoon. I went online to youtube and found a step by step ... Read more

Read less

Was this helpful?

Bought a new gas oven that did not come with a propane conversion kit.

125 of 179 people found this instruction helpful.

Denny from Bishop, CA
Easy
30 - 60 mins
Nutdriver, Wrench set

I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it ... Read more

Read less

Was this helpful?

Stove was set up for natural gas and needed to be converted to LP

118 of 193 people found this instruction helpful.

Ed from Orange, TX
Easy
30 - 60 mins
Nutdriver, Screw drivers

The LP conversion kit contained very good, detailed instructions. I replaced the gas orifices, took off the bottom door and adjusted the regulator.

Used the screwdriver to adjust the low flame and everything was done.

Was this helpful?