Quick Question!

Have you ever purchased from PartSelect.com before?

Authentic Parts
Models > GI15NDXTS2

GI15NDXTS2 Whirlpool Ice Maker - Overview

Get Parts and Repair Help for GI15NDXTS2

If you know the ice maker repair part you need, you can browse the list of all parts on the GI15NDXTS2, or you can search by name or part description. You can also find your part by where it is located on the GI15NDXTS2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your ice maker. We’ve also included any installation videos we have for GI15NDXTS2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GI15NDXTS2

[Viewing 5 of 5]
CABINET LINER AND DOOR PARTS
CONTROL PANEL PARTS
EVAPORATOR, ICE CUTTER GRID AND WAT...
PUMP PARTS
UNIT PARTS, OPTIONAL PARTS (NOT INC...
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$87.13
In Stock

Condenser Fan Motor Kit

This condenser fan motor kit includes a motor, fan blade, wire harness, and screws. Used in a refrigerator, the condenser fan motor moves the condenser fan blade to direct and move...

Order within the next 1 hr and 39 mins and your part ships today!
$62.84
In Stock

Recirculating Pump - 60Hz

A recirculating pump is used with standalone ice cube makers. It circulates the water over the top of the evaporator plate, which produces a layer of ice that is then broken down into ice cubes. If you notice that your ice maker is no longer producing ice or there is no water flowing over the cooling plate, this could be due to the recirculating pump not working. Be sure to keep the pump clean and free of build-up. This pump is 5.75 inches in length, 4.75 inches in width, 4.25 inches in height and weighs 0.81 lbs. This is a genuine OEM appliance part that comes directly from the manufacturer.

Order within the next 1 hr and 39 mins and your part ships today!
$137.02
In Stock

Ice Cutter Grid Complete Assembly

If your freestanding ice maker is not producing ice properly, the ice cutter grid assembly may need replacing. The cutter grid is located within the main unit of the ice maker, and...

Order within the next 1 hr and 39 mins and your part ships today!
$37.71
In Stock

Thermostat, Bin

This is a bin thermostat made for standalone ice makers to activate the ice maker shut-off when bin is full. It senses how much ice is in the bin to determine if it should produce more ice or activate shut-off. The bin thermostat may need to be replaced if bin is overfilled, underfilled, or not producing ice. Thermistor can be tested with an ohm meter. This part is made of plastic and metal, and is white in color. This is an authentic part sourced from the original manufacturer.

Order within the next 1 hr and 39 mins and your part ships today!
$104.30
In Stock

Water Inlet Valve

This water inlet valve supplies the water needed to both the water dispenser and the ice maker. A block in the valve could be what is keeping your machine from properly dispensing ...

Order within the next 1 hr and 39 mins and your part ships today!
$15.59
In Stock

Switch, Plunger Grid/Light

The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the door, the contacts inside the light switch may be burned out, meaning it is time to replace the switch. This package contains both the new light switch and a small plastic spacer. To complete this repair, you will need to remove the control panel section of your refrigerator. The only tools you will require for this repair are a 1/4-inch nut driver and maybe a small flat blade screwdriver. Be sure to disconnect the power source from the refrigerator before completing this repair.

Order within the next 1 hr and 39 mins and your part ships today!
$79.54
In Stock

Pump, Drain

This part is a drain pump for your ice maker. When you flush the reservoir on your ice maker to remove impurities, the drain pump is the part that removes the water from the reserv...

Order within the next 1 hr and 39 mins and your part ships today!
$21.01
In Stock

TUBE-WATER

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

Order within the next 1 hr and 39 mins and your part ships today!
$50.02
In Stock

Temperature Sensor

This is a temperature sensor. It may also be known as an ice maker sensor and is used in conjunction with your ice machine. This piece is roughly 3.5 inches long, almost 2.5 inches...

Order within the next 1 hr and 39 mins and your part ships today!
$33.58
In Stock

Ice Cutting Grid Wire

There is approximately 10' of wire. Note: 2 kits are needed to replace both directions.

Order within the next 1 hr and 39 mins and your part ships today!

Common Symptoms of the GI15NDXTS2

[Viewing 11 of 11]
Noisy

Fixed by these parts

Show All
Leaking

Fixed by these parts

Show All
Light not working

Fixed by these parts

Show All
Fridge too warm

Fixed by these parts

Show All
Freezer section too warm

Fixed by these parts

Show All
Ice maker not making ice

Fixed by these parts

Show All
Fridge and Freezer are too...

Fixed by these parts

Show All
Clicking sound

Fixed by these parts

Show All
Will Not Start

Fixed by these parts

Show All
Fridge runs too long

Fixed by these parts

Show All
Not dispensing water

Fixed by these parts

Show All

Replacing the Condenser Fan Motor Kit

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Seven year old condenser fan was making noise when it was running.

  • Customer: Josue from Jacksonville, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 177 of 183 people found this instruction helpful
The process to repair was very simple, I removed the back of the refrigerator to expose the motor area. I then removed three screws that held the condenser motor in place. once it was loose I detactched the electrical harness and removed the old motor. I then placed the new motor in place and secured it with the screws and reattached the new electrical harne... read more

Fridge made noise and the center post was HOT!

  • Customer: David from Jefferson City, MO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 46 of 48 people found this instruction helpful
We have a side-by-side fridge/freezer and we experienced a hot center post (where doors come together) and the fridge made loud noise. Also, the (old) fan motor would start, but then quit, so our issue was the motor.

For me the repair was very easy, but for an unexperienced person it may prove to be difficult. If you must order a motor/fan, do... read more

Broken light switch

  • Customer: Randy from Hays, KS
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 58 of 97 people found this instruction helpful
Took all the screws out of the plastic shroud that encloses the switch .There only four that I needed to remove, were the two in front where the switches that go,they go in horizontally and two in the back with large washers on them that hold the back to the top of the box that go in vertically.The switch was a snap ( make that two snaps ) the wiring is alm... read more

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.