GI15NDXTS1 Whirlpool Ice Maker Parts & Repair Help | PartSelect
Models > GI15NDXTS1

Manuals & Care Guides for GI15NDXTS1

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(30)
PartSelect #:PS1957416
Manufacturer #:W10124096
This condenser fan motor kit includes a motor, fan blade, wire harness, and screws. Used in a refrigerator, the condenser fan motor moves the condenser fan blade to direct and move...
$95.56
In Stock
(4)
PartSelect #:PS11730901
Manufacturer #:W10823511
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the or...
$20.25
In Stock
(4)
PartSelect #:PS370853
Manufacturer #:4387020
There is approximately 10' of wire. Note: 2 kits are needed to replace both directions.
$40.55
In Stock
(7)
PartSelect #:PS11740334
Manufacturer #:WP2313637
If your freestanding ice maker is not producing ice properly, the ice cutter grid assembly may need replacing. The cutter grid is located within the main unit of the ice maker, and...
$168.23
In Stock
(5)
PartSelect #:PS11740331
Manufacturer #:WP2313628
A recirculating pump is used with standalone ice cube makers. It circulates the water over the top of the evaporator plate, which produces a layer of ice that is then broken down i...
$79.37
In Stock
(1)
PartSelect #:PS11750553
Manufacturer #:WPW10217917
This water inlet valve supplies the water needed to both the water dispenser and the ice maker. A block in the valve could be what is keeping your machine from properly dispensing ...
$128.04
In Stock
(10)
PartSelect #:PS11740332
Manufacturer #:WP2313633
This is a bin thermostat made for standalone ice makers to activate the ice maker shut-off when bin is full. It senses how much ice is in the bin to determine if it should produce ...
$43.48
In Stock
(11)
PartSelect #:PS11738900
Manufacturer #:WP2149705
The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the do...
$19.67
In Stock
(1)
PartSelect #:PS11745622
Manufacturer #:WP8281196
Sold individually.
$6.47
In Stock
(3)
PartSelect #:PS11756166
Manufacturer #:WPW10548509
This is a temperature sensor. It may also be known as an ice maker sensor and is used in conjunction with your ice machine. This piece is roughly 3.5 inches long, almost 2.5 inches...
$59.11
In Stock
Questions and Answers for GI15NDXTS1
Be the first to ask our experts a question about this model!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Seven year old condenser fan was making noise when it was running.

  • Customer: Josue from Jacksonville, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 189 of 195 people found this instruction helpful
The process to repair was very simple, I removed the back of the refrigerator to expose the motor area. I then removed three screws that held the condenser motor in place. once it was loose I detactched the electrical harness and removed the old motor. I then placed the new motor in place and secured it with the screws and reattached the new electrical harne... read more

Fridge made noise and the center post was HOT!

  • Customer: David from Jefferson City, MO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 48 of 51 people found this instruction helpful
We have a side-by-side fridge/freezer and we experienced a hot center post (where doors come together) and the fridge made loud noise. Also, the (old) fan motor would start, but then quit, so our issue was the motor.

For me the repair was very easy, but for an unexperienced person it may prove to be difficult. If you must order a motor/fan, do... read more

Broken light switch

Door Light Switch – Part Number: WP2149705
  • Customer: Randy from Hays, KS
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 68 of 115 people found this instruction helpful
Took all the screws out of the plastic shroud that encloses the switch .There only four that I needed to remove, were the two in front where the switches that go,they go in horizontally and two in the back with large washers on them that hold the back to the top of the box that go in vertically.The switch was a snap ( make that two snaps ) the wiring is alm... read more