GI1500XHS6 Whirlpool Ice Maker Parts & Repair Help | PartSelect
Models > GI1500XHS6

GI1500XHS6 Whirlpool Ice Maker - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(4)
PartSelect #:PS11730901
Manufacturer #:W10823511
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the or...
$20.30
In Stock
(4)
PartSelect #:PS370853
Manufacturer #:4387020
There is approximately 10' of wire. Note: 2 kits are needed to replace both directions.
$39.20
In Stock
(7)
PartSelect #:PS11740334
Manufacturer #:WP2313637
If your freestanding ice maker is not producing ice properly, the ice cutter grid assembly may need replacing. The cutter grid is located within the main unit of the ice maker, and...
$168.14
In Stock
(3)
PartSelect #:PS11739740
Manufacturer #:WP2217220
The circulation pump assembly, used in a free-standing ice maker, delivers water from the water tank over the top of the evaporator plate. It does this to form the ice that drops o...
$210.44
In Stock
PartSelect #:PS11743305
Manufacturer #:WP627018
The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required ...
$7.16
In Stock
(5)
PartSelect #:PS11723170
Manufacturer #:W10822259
NOTE: As per the manufacture the part does not come threaded. A self tapping screw will need to be used to make threads.
$119.05
In Stock
(1)
PartSelect #:PS11745622
Manufacturer #:WP8281196
Sold individually.
$4.88
In Stock
(4)
PartSelect #:PS11739077
Manufacturer #:WP2185696
This is a drain fastener cap and is used in conjunction with your freezer/refrigerator. This model is almost 1.5 inches in diameter, half an inch thick, and is white in color. This...
$17.30
In Stock
PartSelect #:PS11703451
Manufacturer #:W10801996
This part releases water from the supply line when it's activated.
$83.52
In Stock
PartSelect #:PS11747799
Manufacturer #:WP999367
Sold individually.
$4.98
In Stock
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lack of frequent cleaning resulted in pump failure due to buildup from hard water mineral deposists

  • Customer: Louis from Cheyenne, WY
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 73 of 77 people found this instruction helpful
This ice maker is really a Kitchenaid appliance.

1. Remove all ice and drain water pan by removing drain cap.
2. Disconnect waterline and unplug ice maker
3. Set icemaker on a work bench unless you like working on your knees, head down.
4. Remove flip out chute and ice scoop bracket.
5. Remove water pan by removing thumb sc... read more

Believed the condensor motor was defective and causing strange odor

Condenser Fan Motor – Part Number: W10822259
  • Customer: Nicholas from Frankfort, IN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Socket set
  • 41 of 46 people found this instruction helpful
First disconnected the quick release electrical connection. Then loosened the three screws that were holding the motor in the bracket. However, space is limited and even with small hands it was rather difficult as the screws were in there very tight. There are a few sharp edges on the bracket and in the surrounding area of the motor area, and nicked mysel... read more

Noisy and the Fan wasn't blowing like it should

Condenser Fan Motor – Part Number: W10822259
  • Customer: William from Centreville, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 33 of 34 people found this instruction helpful
I saved my Whirlpool Refrigerator (Model ET21GKXHN00) and learned a lesson. Don’t put off cleaning the refrigerant coils underneath the refrigerator. I replaced the refrigerator about 10 years ago and began to notice that the sound of this one running had changed slightly. I remembered that’s what happened to the first one just before it died. I removed ... read more