This drain pump and filter assembly is a genuine OEM replacement assembly that is designed for washing machines. It is responsible for removing water from the washing machine tub at the end of each wash cycle and trapping any debris or foreign objects like lint, hair, and coins that may clog the drainage system. Signs of a fault in the dr...Read moreain pump and filter assembly include the washer not draining properly, leaving water in the drum at the end of the cycle; unusual noises during the drain cycle, such as grinding or humming sounds; and visible leaks or drips around the pump or filter area.
This genuine OEM door lock is a replacement part specially designed for front-load washing machines. It is a safety mechanism designed to prevent the door from being opened during the wash cycle. When the door is closed, the lock engages automatically, securing the door shut until the cycle is complete and it is safe to open. This ensures...Read more that water and detergent do not spill out of the washer and cause injury. Over time, the door lock may fail due to physical damage or normal wear and tear. If the door lock is faulty, you may encounter issues such as the door not locking properly, leading to the washer not starting or stopping mid-cycle. You may also notice excessive noise and shaking while the washer is running.
This main control board is a vital component for managing the core functions of your home appliance. It processes commands from the user interface and ensures accurate execution of settings such as temperature, cycle duration, and other operational features. A properly functioning control board is essential for reliable performance and ov...Read moreerall appliance efficiency. If you're experiencing issues with responsiveness or inconsistent operation, replacing the control board may restore full functionality.
This door gasket, also known as a door boot, is a genuine OEM replacement made for front-load washing machines. It is blue and made of rubber. The gasket helps to seal the area between the washer tub and the door to ensure water and detergent do not leak out and cause injury or damage to the surrounding areas while the washer is running. ...Read moreOver time the door boot may wear out or become loose or damaged from frequent use and exposure to heat and chemicals. If the door gasket is no longer providing an adequate seal you will need to replace it before resuming use of your washer.
This long shipping bolt is a heavy-duty fastener designed to secure the washer’s tub to the frame during transport, preventing internal damage caused by vibrations. It is essential for safe shipping and installation but must be removed before operating the appliance to avoid serious malfunction. Commonly used in front-loading washing mach...Read moreines, this steel bolt ensures the drum remains stable during transit. Always verify compatibility with your specific model and follow safety guidelines when installing or removing this part.
Keep your washer running smoothly with this genuine door latch. It helps keep the door securely closed during cycles, preventing leaks and making sure everything works as it should. Made for select GE, Hotpoint, Haier, Monogram, and Café models—just check your model before ordering.
This shipping bolt secures internal components during transport to prevent movement or damage. Proper use helps maintain alignment and protection. Replacing a missing bolt restores safe handling and transport readiness.
Introducing the Water Inlet Valve from the trusted brand, GE. This essential component facilitates the accurate and efficient flow of water into your washer, enhancing its overall performance. It's crucial you unplug your washer and turn off the water supply before installing this structure, ensuring safety is maintained throughout. Alway...Read mores remember to shield your hands with work gloves during install. Opting for a genuine GE product means committing to high-quality, extended durability and ultimately, peace of mind. Keep your washer operating at its best with this necessary, trustworthy water inlet valve from GE.
This leveling leg is designed to stabilize the appliance by allowing precise height adjustment on uneven floors. Proper leveling helps reduce vibration, noise, and door alignment issues, making this an essential replacement when the original leg is bent, broken, or missing.
This inverter control board is a vital electronic component for front-load washers, responsible for regulating the motor’s speed and direction to ensure smooth washing and spinning cycles. It converts signals from the main control board into precise variable power, delivering accurate drum movement for optimal performance. Measuring compa...Read morectly to fit within the washer’s control housing, this board helps resolve issues such as no spin, weak tumbling, or cycle interruptions. If your washer fails to spin, shows intermittent motor operation, or displays error codes related to the motor or inverter, replacing this part can restore proper functionality. Installation is simple—disconnect power, remove the control panel, and swap the old board for the new one.
This damper stabilizes the washer drum during spin cycles. Replace if your washer shakes or vibrates excessively. This part is designed to keep your appliance operating reliably and efficiently. Replacing a worn or failing component helps prevent further issues and can extend the overall lifespan of your unit.
This clamp secures the boot gasket in place, ensuring a tight seal between connected components. Proper fastening helps prevent leaks and maintains alignment during operation. Replacing a loose or damaged clamp restores secure sealing and reliable performance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Caleb - For model number GFW850SPN2RS
December 15, 2024
During the spin cycle the machine is very loud. Sounds like a jet engine.
Hi Caleb,
Thank you for your question. If the washer sounds like a jet engine when in use, the bearing on the outer tub is worn or damaged and it will need to replaced. The part number for the outer tub which includes the bearing is PS12743646. We hope this helps!
front panel numbers flashing and then machine did not want to turn on.
Hello Manuel, thank you for reaching out. Based on the description that you have provided, we would recommend checking the user interface board, part number PS16743399, to fix the problem. A malfunctioning user interface board can most probably cause this issue. We hope this helps!
Front panel lights blinking at power,start button and cycle selector knob for short time after replugging power cord. Nothing activates when pushing on power button.
Hi Robert, thank you for reaching out. Ensure that the start button has no crack in it. If it is fine, the issue could be with the main control board, part number PS17874601. It processes commands from the user interface and ensures accurate execution of settings such as temperature, cycle duration, and other operational features. You may need to replace it to fix the issue. We hope this sorts out your problem!
Can you change the water fill level. Add more water per wash?
Hi Mark, thank you for your inquiry. Yes, your washer has a dedicated 'More Water button' on the control panel that adds approximately 3 extra gallons to both the wash and rinse portions of the cycle. Press it before starting the cycle to increase the fill for that load. Beyond that button, the machine uses automatic load sensing to determine water level and does not have a manual permanent adjustment. However, selecting cycles like Bulky, Bedding, or Towels will naturally program the machine to use higher water levels than a standard Normal or Eco cycle. You can also lightly dampen heavy items before loading them, this causes the load sensor to detect a heavier load and dispense more water automatically. Glad to be of help!
Was this helpful?
Thank you for voting!
CALEB - For model number GFW850SPN2RS
December 17, 2024
I'm told I need part PS12743646, but my tub is fine. I'd like to replace the bearing only. Which I know can be done. Do you sell the bearing only or able to provide the size so I can find an aftermarket one? Thank you.
Hi Caleb, Thank you for reaching out to PartSelect.com. Very sorry, General Electric only makes and sells the Bearing as part of the Rear Tub. For more specialized assistance or to speak with someone about this, we would suggest calling GE. We hope this helps!
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Squealing Water Valve When Water Is Filling Washer Tub
17 of 19 peoplefound this instruction helpful.
Patrick from GLEN ALLEN, VA
Easy
30 - 60 mins
Pliers, Screw drivers
Sediment in your water will ruin these water inlet valves over time. It will reduce the amount of water filling the tub & will be very noisy making a squealing sound.
You’ll need a #2 Philips screwdriver & a standard set of pliers.
UNPLUG ELECTRIC SUPPLY FROM WASHER, TURN OFF WATER VALVES, THEN DISCONNECT WATER LIN
... Read moreES & DRAIN HOSE. Pullout the detergent dispenser drawer. Remove 2 self-tapping screws and & 3 sheet metal screws. Slide front control panel to the right and let it rest on the machine. Remove 3 sheet metal screws to release the top lid cover. Pull the lid towards you and lift off. You’ll see water inlet valves in the left rear. Remove Philips head screws securing water inlet valve. Disconnect electrical wires from the water inlet valve solenoids. Using pliers, squeeze hose clamps and slide down small hoses. Pull off or twist the small hoses from the old water inlet valve. Install the small hoses onto the new Walter inlet valve and reconnect electrical harness to water inlet valve solenoids. Mount new water inlet valve, reconnect water supply hoses & turn on water supply. Check for any leaks before going any further. If no leaks, reinstall top lid & front panel. CONTROL PANEL IS DIFFICULT TO LINE UP WHEN SLIDING IT TO THE LEFT TO REINSTALL. LINE UP THE SLOTS FOR THE SCREWS WHEN REINSTALLING THE CONTROL PANEL. Refasten all screws and slide dispenser drawer back into dispenser pocket. Reconnect electrical supply. Washer should operate normally.
Read less
Was this helpful?
Thank you for voting!
No spin, no drain
7 of 15 peoplefound this instruction helpful.
Peter from CLAYTON, NC
Easy
30 - 60 mins
Nutdriver, Pliers
Disassemble according to instructions then remove pump...my only issue was I ordered the pump and paid $11.95 for t 2 to 3 days shipping. I didn't get the part until the following Saturday which was like 6 to 7 days...horrible delivery
Was this helpful?
Thank you for voting!
Pump Replacement
4 of 6 peoplefound this instruction helpful.
Cheston O from Clayton, NC
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers
The first thing to get is a baking sheet/pan and a bucket. You'll want to get it as close to the drain as possible. Be ready for ALOT of water to be in there. Ease it out and dump the water into the bucket until it's all out. Next you'll have to prop up the front of the machine at least 4 or 5 inches. You'll need pliers to loosen the hos
... Read moree clamp. There's only 4 screws so it's pretty easy, but you'll only be able to see the 2 in front. The other 2 you'll have to feel your way thru it.
My Orders
