GFS2271L10 Caloric Refrigerator Parts & Repair Help | PartSelect
Models > GFS2271L10 (MN10)

GFS2271L10 (MN10) Caloric Refrigerator - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(16)
PartSelect #:PS395284
Manufacturer #:833697
This condenser fan motor kit is designed for use with refrigerators. This fan draws air through the condenser coils and over the compressor. It does this with the goal of cooling t...
$51.30
In Stock
(12)
PartSelect #:PS1964648
Manufacturer #:W10169313
This part replaces two terminal switches in a dryer and prevents the dryer from running when the door is open. This includes two connectors. If your dryer will not shut off, start,...
$16.25
In Stock
PartSelect #:PS11757536
Manufacturer #:WPY311946
Made for use with older model Maytag brand series 06 Halo of Heat style electric clothes dryers, this pre-stretched heating element coil carries 240 volts.
$48.71
In Stock
PartSelect #:PS11747999
Manufacturer #:WPW10017410
$11.76
In Stock
PartSelect #:PS11728084
Manufacturer #:W10843121
$36.60
In Stock
PartSelect #:PS2186610
Manufacturer #:Y0057119
No Longer Available
PartSelect #:PS104634
Manufacturer #:60774P
No Longer Available
PartSelect #:PS2053583
Manufacturer #:56591
No Longer Available
PartSelect #:PS100866
Manufacturer #:56620
No Longer Available
PartSelect #:PS11740744
Manufacturer #:WP311155
$8.99
Special Order
Questions and Answers for GFS2271L10
Be the first to ask our experts a question about this model!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sometimes the condenser fan would start causing the refrigerator to overheat.

  • Customer: Tom from Franklin, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 154 of 166 people found this instruction helpful
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire a... read more

Switch sticking in on position

Door Switch Kit – Part Number: W10169313
  • Customer: Don from Jacksonville, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 93 of 126 people found this instruction helpful
FIRST unplug dryer from electrical source, CAUTION, the top of this dryer does not open with clips, do not pry on top to open! On the front of the dryer look under the lower panel, and find two screws, one on the left side, and one on the right, remove these screws, and pull slightly down on panel to remove. Behind this panel find two screws holding the do... read more

Dryer wouldn't heat

Heater Wire - 240V – Part Number: WPY311946
  • Customer: Edith from Grove City, OH
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers, Wrench (Adjustable)
  • 56 of 65 people found this instruction helpful
Since the heating coil is right behind the front door I had to remove all panels starting with the back one to get to it. The back has a lot of tech screws that I removed with the nut driver. The side panels were removed with a phillips screwdriver. The top is held in place with the other panels. The base was shifted away from the front and I released th... read more