Models > GFS142/MN11

GFS142/MN11 Caloric Refrigerator - Overview

Sections of the GFS142/MN11

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(66)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$11.73
  In Stock
Dryer Radiant Flame Sensor – Part Number: WP338906
Dryer Radiant Flame Sensor
★★★★★
★★★★★
(12)
PartSelect #: PS11741429
Manufacturer #: WP338906
If your gas dryer is not heating up or igniting, then replacing the flame sensor, located in the burner assembly, could solve it. This part senses heat from the igniter to monitor if it is hot enough ...
$47.91
  In Stock
Evaporator Fan Motor Kit – Part Number: 482731
Evaporator Fan Motor Kit
★★★★★
★★★★★
(20)
PartSelect #: PS376645
Manufacturer #: 482731
The evaporator is found in the back of the freezer. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade. If you...
$74.11
  In Stock
High Limit Thermostat – Part Number: 489P3
High Limit Thermostat
★★★★★
★★★★★
(1)
PartSelect #: PS2044484
Manufacturer #: 489P3
If you notice that your dryer will not start, shuts off too soon or provides too much heat, you may need to replace your high limit thermostat. This high limit thermostat acts as a safety mechanism th...
  No Longer Available
Bi-Metal Defrost Thermostat – Part Number: WP4387499
Bi-Metal Defrost Thermostat
★★★★★
★★★★★
(1)
PartSelect #: PS11742471
Manufacturer #: WP4387499
This thermostat opens at 50 degrees Farenheit and closes at 25 degrees Farenheit.
$59.18
  In Stock
Cold Control Thermostat – Part Number: 1123394
Cold Control Thermostat
★★★★★
★★★★★
(2)
PartSelect #: PS316579
Manufacturer #: 1123394
This cold control thermostat has a temperature range from 29.5 degrees Fahrenheit to 16.5 degrees Fahrenheit and a capillary length of 35 inches.
$127.91
  In Stock
Filter Drier Tube – Part Number: W10843121
Filter Drier Tube
PartSelect #: PS11728084
Manufacturer #: W10843121
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
$38.13
  In Stock
DISCONTINUED – Part Number: Y0056652
DISCONTINUED
PartSelect #: PS2186318
Manufacturer #: Y0056652
  No Longer Available
THERMOSTAT,LOW LIMIT – Part Number: 56591
THERMOSTAT,LOW LIMIT
PartSelect #: PS2053583
Manufacturer #: 56591
  No Longer Available
SCREW – Part Number: 0056545
SCREW
PartSelect #: PS7067
Manufacturer #: 0056545
  No Longer Available
POST, CRISPER – Part Number: 0056619
POST, CRISPER
PartSelect #: PS7134
Manufacturer #: 0056619
  No Longer Available
SUPPORT, CRISPER – Part Number: 0056744
SUPPORT, CRISPER
PartSelect #: PS515906
Manufacturer #: 0056744
  No Longer Available

Questions And Answers for GFS142/MN11

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the GFS142/MN11

[Viewing 6 of 6]
Noisy
Fixed by
these parts
Fixing
Show All
Fridge too warm
Fixed by
these parts
Fixing Fixing Fixing
Show All
Freezer section too warm
Fixed by
these parts
Fixing Fixing
Show All
Not Heating
Fixed by
these parts
Fixing
Show All
Fridge and Freezer are too warm
Fixed by
these parts
Fixing
Show All
Too hot
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Unit very noisy and freezer too warm
First I removed the racks in the freezer. The rack supports on the sides lift off without tools. The evaporator cover is at the back of the freezer. 4 phillips head screws. The cover lifts up then forward to expose the evaporator, evaporator fan and duct. The duct is held by 3 hex head screws. The evaporator fan is attached to the duct with a wiring pigtail to a plug. Unplug the fan and remove the duct. The fan is held by 2 hexhead screws. The new fan is put in place and assembly is simply the reverse of disassembly. The unit is quiet and cools properly now. The new part fit perfectly.
Parts Used:
Evaporator Fan Motor Kit
  • Michael from Churchville, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
86 of 91 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas Flame Would Drop Out
First it was a process of alimination to find out why it was dropping out. After the problem was found it was just a matter of replacing the holding coil on the gas valve. Thank you fred kenney sr
Parts Used:
Dryer Radiant Flame Sensor
  • FRED from BRIELLE, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
47 of 64 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not heat up.
I unplugged the dryer,removed the two small screws on the front of the dryer and pulled the bottom forward. The two wires connected to the door do not have to be removed. With an electrical tester using the Ohm setting I tested the Radiant sensor and the Gas Valve coils. The two terminal coil was DOA. The dryer can be operated with the front open as long as the door wires are connected. Symptons: The igniter would heat up and not release gas. My repair was successfull due to this awesome website and the super fast shipping service. AAAA++++
Parts Used:
Dryer Radiant Flame Sensor
  • Roger from Bonners Ferry, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
26 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!