GE800-04 (Type 1) Black and Decker Edger - Overview

This is a Genuine Manufacturer Sourced replacement part used on a variety of Black and Decker Trimmers/Edgers. This item is Sold Individually. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.

This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with electric trimmers. The copper contact is used to link the switch assembly to the extension cord assembly. This contact is sold as a single item, please note the other contact is sold separately.

This is an authentic replacement part that is sourced from the original manufacturer for use with hedge trimmers. The special screw is commonly used to secure the front guard assembly. This screw is sold as an individual replacement part, please note four screws may be required.

This is an original replacement part manufactured for use with power tools and lawn and garden equipment. The versatile wing nut has multiple functions depending on the model of tool or equipment. It is designed to be fastened and loosened without the use of tools. This wing nut is sold individually, please see model diagram for part location and usage.

This is a specially designed replacement terminal made for use with a variety of power tools. The purpose of a terminal is to allow user to easily connect a wire. One end of a terminal will allow to secure the wire, while the other end has an opening allowing user to secure it with a screw. Because this terminal is made out of conductive ...Read moremetal it will transfer the electricity through itself. Please note it is sold individually.

This is replacement ball bearing is a commonly used item on a variety of power tools. Bearings are specially designed to allow connected parts to rotate smoothly. The way it is build it will minimize friction between the rotating parts. This is a sealed metal bearing generally used with an armature. Includes one (1) bearing per order. St...Read moreeps to replace this bearing would be different from one model to another. However, general steps to complete this repair would be the same. You may need a screwdriver and pliers to finish this job. • Make sure the unit is unplugged • Remove the cover/housing • Disengage the brushes • Remove the armature • Remove the old bearing • Install the new bearing • Reassemble unit and test the equipment

This is an authentic Black and Decker replacement part, sourced from the original manufacturer for use with trimmers. The metal hex head screw is used to secure the handle assembly to the main shaft of the trimmer. This screw may not require tools to install and it is sold as an individual replacement part.