GCV520U Honda Engine - Parts

This is a genuine Honda replacement spark plug. It is sourced directly from original equipment manufacturer and it is sold individually. It is designed to ignite the air fuel mixture by the spark. If spark plugs are not checked with regular services, cleaned or changed when necessary, they can cause problems to occur with the engine. Replacing it you should only need a spark plug socket.

This is an authentic Honda replacement part, sourced from the original manufacturer for use with small engines. The special hex head bolt is commonly used to secure the ignition module assembly. This flanged bolt is available as an individual replacement part, please see illustrated part list for associative parts.

This is a Genuine OEM Fuel Pump Replacement. It has a Plastic Body. A Fuel pump is used when the Fuel tank is mounted lower than the Carburetor and cannot rely on gravity to carry Fuel through the Fuel line. It is recommended to check for hairline cracks and other damage to the external surfaces of the pump. If it is damaged discard the pump and perform a fuel pump replacement.

This genuine Honda flange nut is generally used to secure fan or starter housing to the main unit. It is an authentic item sourced from original equipment manufacturer for use with small engines. It is a hex flange nut which would require a wrench fro installation. Please note this item is sold individually.

It is an authentic replacement o-ring that is supplied by original equipment manufacturer for use with Honda engines. This is the item that creates a seal between the camshaft pulley and the shaft, for correct application please make sure to check appropriate diagrams of your model. Over time the material may deteriorate and crack allowin...Read moreg for leaks, if this happens the o-ring will need to be replaced. Please note this durable rubber item is sold individually.

This is a genuine manufacturer-approved component which is specially made for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty nut that helps to secure the tappet adjusting screw. Please make sure to refer to the appropriate diagrams of your model for the corr...Read moreect location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an authentic manufacturer-sourced part that is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a faulty or a damaged tappet adjusting screw that was installed on a new unit. The purpose of this item is to secure a valve rocker arm, please make sure t...Read moreo refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This item is an authentic OEM part which is made for use with Honda engines commonly installed on a variety of lawn and garden equipment. The clip is utilized to secure the fuel tube. If the clip is damaged or is missing, this will provide an identical replacement for a missing or a damaged component that was installed on a new unit. Chec...Read morek the diagrams of your model for the exact location and the correct application of this hardware. One durable metal clip is included. You may need pliers to secure and remove it.

It is an authentic manufacturer-sourced component which is specially designed for Honda engines that are commonly installed on a variety of lawn and garden equipment. If the original cap is damaged or is missing, this will provide an identical replacement. This part is made of high-quality metal and is sold in a pack of two. Check the own...Read moreer's manual and the diagrams for your model to ensure the correct repair procedure.

The flange bolt is used to secure parts together in a variety of lawn and garden outdoor equipment. It is sourced directly from the manufacturer and has a diameter of 6mm and a length of 12mm. The bolt is made of metal and has a ring-shaped rim on one end known as a flange. This flange helps to secure the bolt in place and prevents it fro...Read morem falling off during use. Inspect all the bolts on your equipment as you may need more than one. If you note that any of them are deformed, corroded or the threads are worn down, you will need to replace them as each bolt is sold individually. Remove the damaged bolt and thread the new one on with your hands before tightening with a wrench.

This OEM-manufactured flange bolt provides a secure connection between two parts of your equipment. What is different about a flange bolt is that it has a wide, flat flange at the end. This helps to distribute the load being applied to it and prevents the bolt from becoming loose. Flange bolts are commonly found in lawn equipment, but the...Read moreir location varies by the make and model of the machine. When damaged, the part that the flange bolt was holding may loosen and fall off. You also may observe that it the flange bolt is cracked or corroded. It is important for you to replace broken flange bolts immediately as loose or vibrating parts can detach from your equipment while it is operating. You need a socket wrench to remove a flange bolt, as well as rust dissolver or penetrating oil if it is stuck. This replacement part is sold individually so make sure that you consult your user guide to identify where your flange bolts are and how many your equipment needs.

The 6x8 flange bolt has a lot of applications on various equipment, but is generally designed to secure and lock parts in place. Common on lawn and garden equipment and engines, this flange bolt is silver in color, made of metal, and can become broken over time due to wear and tear. You will need a wrench or socket and torque wrench whe...Read moren making this repair, which is generally easy, but a lot depends on the location and nature of the part it attaches to.