Models
>
GCG1530F0WW
GCG1530F0WW General Electric Trash Compactor - Overview
Sections of the GCG1530F0WW
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Compactor Bags - Package of 12
PartSelect #: PS258002
Manufacturer #: WC60X5017
These bags will fit all fifteen inch rectangular trash compactors.
$170.63
In Stock
Drive Gear Kit
PartSelect #: PS257882
Manufacturer #: WC36X5071
The drive gear is located at the bottom of your compactor and helps the drive motor power the ram by operating the chain that powers the compacting ram. If you notice that your drive gear is broken or...
No Longer Available
Container Handle
PartSelect #: PS257793
Manufacturer #: WC36X10036
Screws are sold separately.
No Longer Available
KNOB ROTARY SWITCH WW
PartSelect #: PS11758999
Manufacturer #: WC36X22998
Sold individually.
No Longer Available
Power Nut Kit
PartSelect #: PS257893
Manufacturer #: WC36X5083
This kit includes the power nut and 2 clips/washers. Screws/studs are sold separately.
No Longer Available
Bag Carrier
PartSelect #: PS257772
Manufacturer #: WC36X10015
This part holds the trash compactor bag to make taking out the trash without worrying about tearing the bag.
* This part also comes with the 2 handles.
No Longer Available
Questions And Answers for GCG1530F0WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the GCG1530F0WW
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
trash compactor ram not moving - broken plastic drive gear
1) pulled the compactor from under the counter and unplugged it. 2) tipped it on its side 3) removed 5 screws (3 on the motor side and two on the bottom) an took off the bottom cover plate. 3) using the pliers i pulled of the retainer clip from the large drive gear(it had broken on only the hub remain attached) 4) i then just slid in the new gear, snapped in the retainer clip and buttoned up the cover plate. Note I did not replace the other parts that came in the package because the existing ones seemed ok.
Parts Used:
-
william from andover, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
16 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle broke
My husband removed the old handle by unscrewing the 2 screws, and replaced it with the new handle, replacing the 2 screws. EASY
Parts Used:
-
CONNIE from MARANA, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle cracked
Remove two screws, remove old handle installed new handle, install two screws.
Parts Used:
-
James from SHREVEPORT, LA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
