GC720 (41AJGC-C954) MTD Tiller - Overview

Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damag...Read moreed, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi and MTD lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hex washer screw. Ke...Read moreep in mind this high-quality part is made of durable metal and is sold individually.

This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually. This part is rated as Easy to install by customers. If missing or damaged (likely due to fatigue) it should be replaced. Refer to your owners manual to ensure this is the correct part for you.

This T-knob, is a manufacturer-approved replacement part for use in tillers and lawn tractors. It is a T-shaped handle used in a variety of applications, such as adjusting the equipment RPMs (revolutions per minute) or it can be attached to the depth bar and used to control the depth that the tines or blades penetrate the soil, for tasks ...Read moresuch as tilling soil or cutting grass. However, if the threads on the bolt wear out or the plastic body of the knob becomes damaged, you will not be able to control your equipment using the knob. A faulty T-knob may result in inconsistent speed, inaccurate depth settings, uneven tilling, or inefficient grass cutting. Remove the fasteners that secure the t-knob and pull it off the equipment. It is recommended to replace the fasteners at the same, especially if they are worn down or damaged. Place the new T-knob in position and secure it with the fasteners

This authentic manufacturer-sourced component is specially designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Make sure to refer to the diagrams for your specific model for the exact location and the correct application of this screw. Keep in ...Read moremind this high-quality product is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.

This is a genuine replacement part sourced from the original manufacturer for use with tillers. The special v-belt is commonly used to engage the tiller tines. Over time belts can wear stretch or deteriorate and crack. Replacing worn belts is part of normal equipment maintenance. This special v-belt is available as an individual replacement part, please see model diagram for associative parts.

This manufacturer-certified Hex Bolt, measuring 5/16-18 x .75 inch, is a gold, metal, individually sold bolt. It can be installed using a wrench or socket and torque wrench, by tightening to manufacturer specifications. If damaged (likely due to fatigue) the threads will be stripped, or the ends rounded off. If broken or missing, it sho...Read moreuld be replaced. Refer to your owners manual or model number to ensure you are purchasing the correct part.

The metal screw attaches to the block steering. It is a genuine OEM sourced part which is specially designed for use with chippers, shredders, edgers, lawn tractors, and snowblowers made by MTD, Yard Machines, Troy-Bilt, Bolens, and Yard Man. This item is available as an individual replacement. A wrench will be necessary during the instal...Read morelation of this part. It will need to be replaced if it becomes stripped or broken.