GC160A (Type PXU) Honda Engine - Overview

This carburetor is for lawn and garden equipment engines. Carburetor mixes air and gas before the fuel mix goes to the engine. Wear work gloves to protect your hands and work in a well-ventilated area during this repair.

This is an original part from the Honda manufacturer. The air cleaner gasket is composed of a cardboard composite, and is compatible with many small engines. The gasket is fitted within the air cleaner housing. It is recommended to refer to the specific manual and diagrams for repair instructions. This part is sold individually. A wrench and a screwdriver are often helpful in the replacement.

This is an authentic replacement part manufactured for use with Honda small engines. The ignition coil is used to created an electric charge that is sent to the spark plug that ignites the fuel inside the cylinder. The timing of the electric charge is set by the spacing of the magnets in the flywheel that create the electric charge as the...Read morey pass the ignition coil. This ignition coil is sold as an individual replacement part.

This is a genuine OEM approved part designed for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or faulty tube that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of th...Read moreis component. Keep in mind this high-quality item is made of durable rubber and is sold individually.

This spring-throttle return is an OEM part. It is designed for Honda engines that are commonly installed on a variety of lawn and garden equipment. It applies tension on the governor rod allowing it to retract. The governor system is like a cruise control system. It maintains the speed by adjusting the carburetor. Over time it may wear ou...Read moret and stretch eventually requiring a replacement. One durable metal spring is included. Refer to the diagrams for your model for the exact location and the correct installation of this hardware. It is best to use pliers to remove the old one and secure the new one.

This replacement recoil starter assembly is commonly used with small Honda engines. This is the starter assembly that is used to pull start the unit. It is a complete assembly that includes a plastic shroud/housing, starter pulley, starter spring, grip and the pull rope. Please note the hardware/screws to attach this assembly are sold sep...Read morearately. Replacing this starter assembly is a simple task that should only require a screwdriver. • Make sure to disconnect the spark plug • Remove housing screws • Separate the old housing from the unit • Secure the new housing with the screws • Reattach spark plug and test the equipment

This an authentic OEM sourced replacement part which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is the base that connects to the carburetor and holds the air cleaner which is sold separately. Keep in mind this high-quality item is made of durable plastic and is sold individually. P...Read morelease make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.

This rope is an authentic Honda replacement part. It is compatible with over 100 models of engines. By pulling this rope, the recoil starter is rotated. The engine would not be able to start without this part. Its should be replaced if it is cut or worn. Please note the grip handle is sold separately as part 28461-ZL8-003.

The air guide attaches to the carburetor insulator and is made of metal. This item is available as an individual replacement part. This is an original Honda part for use in engines and generators. It might require a screwdriver, a set of pliers, and a socket set to replace this part if it becomes broken.

This is an authentic manufacturer approved replacement cover that is specially designed for use with Honda engines. The purpose of this cover is to secure air filter element and protect internal parts like carburetor from dust and debris. It is made from durable plastic and it is sold individually.

This is an authentic Honda replacement part that has been sourced from the original manufacturer to be used with small engines. The fuel tube is part of the fuel system and is used to carry fuel from the pump. This item is available as an individual replacement part.