GBV-345 (TYPE 1) Poulan Leaf Blower / Vacuum - Overview

This 25-inch fuel line carries fuel from the tank to the carburetor, ensuring proper engine operation. Made from durable clear plastic, it is designed to withstand regular use but may become clogged or brittle over time. Replacing a worn or damaged line can help prevent leaks and restore reliable starting and performance.

This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filt...Read moreer is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.

This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.

This OEM Piston Ring is used to provide a seal between the piston and cylinder wall. It attaches around the piston, inside the groove. It will require a screwdriver, allen wrench, torx wrench and socket set and is rated as "Hard" to install. The part is silver, metal, and individually sold. If broken due to general wear/fatigue you will h...Read moreave poor compression within the cylinder, causing a loss of power. If broken, damaged or worn, the part should be replaced. Refer to your make, model, and diagram to ensure this is the correct part.

This purge bulb is an authentic OEM part from Craftsman for gas blowers, trimmers, blowers and weed wackers. This part disperses fuel to the carburetor to provide starting the blower faster. You will need a screw driver to replace this part. This purge bulb is made of rubber and sold individually.

This genuine OEM foam air filter is designed to protect the carburetor and engine of your blower by preventing debris from entering. It is housed within an air filter cover. If the filter shows signs of tears, holes, or excessive dirt buildup, it is considered broken. Not replacing a damaged or clogged foam air filter can lead to various ...Read moreconsequences. The engine may suffer from reduced performance, decreased fuel efficiency, and increased wear and tear over time. To replace the filter, access the air box filter cover on your machine and remove the old filter. Refer to your user guide for specific installation instructions. It may be recommended to apply two-cycle oil to the packaging and allow the filter to absorb it. Afterward, remove the filter from the packaging and gently squeeze out any excess oil using a paper towel. This replacement part is sold individually.

This OEM Vacuum Bag holds grass and leaf clippings when the blower is switched to vacuum mode, and is attached to the exit port. It is constructed of white fabric. If broken due to wear/fatigue it will no longer be able to hold clippings and should be replaced. Refer to your make, model and diagrams to see if this is the right part for your machine.

This flywheel is an authentic manufacturer replacement part for use with lawn and outdoor equipment. The flywheel is a heavy, circular disc that has magnets that create an electric charge sent to the spark plug to create the spark that ignites the fuel and air mixture in the engine. It is attached to the engine crankshaft by a key known a...Read mores a shear pin or flywheel key. This assembly is a critical component in the starting and running of your power equipment. Over time, the magnets on the flywheel will wear down, and the flywheel may chip and crack. A faulty flywheel will result in a loss of power, excessive shaking during use, and difficulty starting the equipment. Remove the flywheel using a flywheel puller. Position the new flywheel on the crankshaft and secure it with the retaining nut and flywheel key. This flywheel is sold as an individual replacement part.

Tubes on leaf blowers are not only used to project air, but also suction it and guide any debris from your yard into your blower collection bag. This upper tube is designed for and compatible with various models of leaf blower vacuum and is made of plastic. Measuring approximately 18-inches in length, this tube connects to a lower tube an...Read mored is used as the connecting tube to the leaf blower itself. Over time and through use, leaf blower tubes can crack and break or simply not connect, and if your tube is broken it needs to be replaced. To replace this tube, simply twist the tube clockwise to remove it, and twist the new tube on counterclockwise until a click is felt.

This is a genuine OEM approved replacement starter spring is specially designed for use with gandheld gas powered blowers and trimmers. The purpose of this spring is to retract the starter assembly on the engine, so it engages the drive cup on the flywheel to start the engine when pulled. This spring is made out of metal and it is sold individually.

This choke lever is an OEM replacement part intended for use in blowers. The choke lever acts as a control mechanism that regulates the air-fuel mixture during the combustion process. By adjusting the choke lever, you can either restrict or increase the amount of air flowing into the carburetor. When the choke lever is engaged, it restric...Read morets the airflow, which enriches the fuel mixture for easier starting in cold conditions. Once the engine is running smoothly, the lever can be disengaged to restore the normal air-fuel mixture levels. If the choke lever cannot engage, you will have difficulties starting the blower and notice reduced performance. Additionally, if the lever fails while it is in the closed position, the engine may become flooded, causing excessive fuel consumption, smoke, and stalling. You can find the choke lever near the carburetor. Carefully pull off the faulty lever from the equipment and snap the new one into place.

This high quality airbox cover is a genuine OEM sourced part, not an aftermarket imitation. It is specially designed for use with a Poulan gas blower. The purpose of this cover is to secure and protect the air filter element which is sold separately. Please note, this black plastic item is sold individually. Replacing this part does not require any tools, it simply snaps into place.